Publication Type:

Conference Proceedings


IOP Conference Series: Materials Science and Engineering, Institute of Physics Publishing, Volume 310, Number 1, p.012043 (2018)



Aluminum, Aluminum alloys, Developed model, Dynamic recovery, Dynamic recrystallization, Friction, Friction stir, Friction stir welding, Friction stir welding(FSW), Manufacture, Process parameters, Solid-state joining, Sugeno fuzzy model, Tensile strength, Tool rotations, Welding


Friction stir welding (FSW) is a promising solid state joining technique for aluminium alloys. In this study, FSW trials were conducted on two dissimilar plates of aluminium alloy AA2024 and AA7075 by varying the tool rotation speed (TRS) and welding speed (WS). Tensile strength (TS) of the joints were measured and a Sugeno - Fuzzy model was developed to interconnect the FSW process parameters with the tensile strength. From the developed model, it was observed that the optimum heat generation at WS of 15 mm.min-1 and TRS of 1050 rpm resulted in dynamic recovery and dynamic recrystallization of the material. This refined the grains in the FSW zone and resulted in peak tensile strength among the tested specimens. Crest parabolic trend was observed in tensile strength with variation of TRS from 900 rpm to 1200 rpm and TTS from 10 mm.min-1 to 20 mm.min-1. © Published under licence by IOP Publishing Ltd.


cited By 0; Conference of International Conference on Advances in Materials and Manufacturing Applications 2017, IConAMMA 2017 ; Conference Date: 17 August 2017 Through 19 August 2017; Conference Code:135135

Cite this Research Publication

V. R. Barath, Vaira Vignesh R., and Dr. Padmanaban R., “Analysing the strength of friction stir welded dissimilar aluminium alloys using Sugeno Fuzzy model”, IOP Conference Series: Materials Science and Engineering, vol. 310. Institute of Physics Publishing, p. 012043, 2018.