Publication Type:

Journal Article

Source:

Applied Mechanics and Materials, Volume 110-116, Bangkok, p.4661-4668 (2012)

ISBN:

9783037852620

URL:

http://www.scopus.com/inward/record.url?eid=2-s2.0-81255161270&partnerID=40&md5=72c2703d068d0e5742e9f019c57cfc8d

Keywords:

3D-finite element analysis, Aerospace engineering, Axial flux permanent magnet, Brushless DC motors, Design objectives, Efficiency, Efficiency improvement, Electric motors, Fiber optic sensors, Finite element method, Halbach, Halbach array, Left Ventricular Assist Device, Left ventricular assist devices, Magnet-fraction, Optimization, Permanent magnets, Rotor magnets, Soft magnetic composite materials, Soft magnetic composites, Stator core

Abstract:

This paper presents the Finite Element Analysis (FEA) based design, optimization and development of an axial flux permanent magnet brushless DC motor for Left Ventricular Assist Device (LVAD). With the design objective of improving the existing motor's efficiency, different topologies of AFPM machine has been examined. Selection of optimal magnet fraction, Halbach arrangement of rotor magnets and the use of Soft Magnetic Composite (SMC) material for the stator core results in a novel motor with improved efficiency and torque profile. The results of the 3D Finite element analysis for the novel motor have been shown.Thermal analysis for the existing motor has also been done and the FEA results are compared with the analytical and experimental results.Finally the test results for the novel motor and the general conclusions are also discussed. © (2012) Trans Tech Publications, Switzerland.

Notes:

cited By (since 1996)0; Conference of org.apache.xalan.xsltc.dom.DOMAdapter@1abacbe1 ; Conference Date: org.apache.xalan.xsltc.dom.DOMAdapter@5d9f2e7c Through org.apache.xalan.xsltc.dom.DOMAdapter@7da4fee8; Conference Code:87387

Cite this Research Publication

Sa Neethu, Shinoy, K. Sb, and Shajilal, A. Sc, “Efficiency improvement of an axial flux permanent magnet brushless DC motor for LVAD application”, Applied Mechanics and Materials, vol. 110-116, pp. 4661-4668, 2012.