Publication Type:

Conference Paper

Source:

Materials Today: Proceedings, Elsevier Ltd, Volume 5, Number 2, p.8604-8611 (2018)

URL:

https://www.sciencedirect.com/science/article/pii/S2214785317328316#!

Abstract:

<p>This paper investigates suitability of friction surfacing (FS) for cladding AISI 1012 with Monel K500. FS trials were conducted by varying the spindle speed, axial pressure and the horizontal feed rate. The thickness and width of the coating were measured and the data were used to develop radial basis function network model relating the FS process parameters with the coating thickness and width. The model was used to analyze the variation of coating thickness and width. The coating thickness and width decreased with increase in spindle speed and horizontal feed rate, while they increased with increase in axial load. © 2017 Elsevier Ltd.</p>

Notes:

cited By 0; Conference of 2017 International Conference on Emerging Trends in Materials and Manufacturing Engineering, IMME 2017 ; Conference Date: 10 March 2017 Through 12 March 2017; Conference Code:135872

Cite this Research Publication

B. K. Murugan, Balusamy, V., Dr. Padmanaban R., and Vignesh, R. V., “Study of the effect of parameters in friction surfacing of Monel over Mild Steel using linear - Radial basis function model”, in Materials Today: Proceedings, 2018, vol. 5, pp. 8604-8611.