Funded Projects 

  • R Pramod, Assistant Professor has secured Project under Live-in-Labs initiative of Amrita Centre of International Programs [ACIP} titled “Design and Development of Solar/LPG powered Arecanut leaf Plate Press Machine and Areca Leaf Sheath-Solar dryer". Rs.  78000 has been allocated as the project expenses. 

  • The following 3 B-Tech projects from Department of Mechanical Engineering, ASE-Bengaluru have been approved by the Karnataka State Council for Science and Technology (KSCST), Bangalore, for the current academic year:

Sl. No. Project Name of the Student(s) Name of the Guide Amount Sanctioned - Rs.
1 Design and Development of Drainage Inspection and Anti-Clogging Robot Mr. Nakka Suryasatya, Sanjeevi & others Mr. B. N. Prashanth 6, 500. 00
2 Development of an Eco-friendly Pneumatic Engine for Reduced Fuel Consumption Mr. M. I. Nadeem & others Mr. M. E. Shashi Kumar 6, 500. 00
3 Design and Development of Automobile Driving Mechanism for Disabled Arm People Mr. B. Arjun Nataraj & others Mr. R. Pramod 6, 500. 00
  • Mr. Rajeevlochana G. Chittawadigi has secured a project from MTAB Engineers Private Limited, Chennai. The details of the project are:
    • Title: Development of Virtual Simulator for Cartesian Motion of Industrial Robots
    • Duration: Six Months (Jan - June, 2016)
    • FundingAmount: Rs. 1, 00,000/-

  • Internal Funding
    • Title: Mechanical and Tribological Properties of Composite Materials
    • Principal Investigator: Dr.VeereshKumar.G.B.
    • Co-Investigator: Mr. Pramod.R
    • Amount Funded: Rs. 10.00 Lakhs

PUBLICATIONS

  1. Saneesh Nair, Vinod Kotebavi, Alokekumar Das, presented a paper titled “Performance investigation of rotary heat exchanger installed with four ducts using CFD”, during 6th- 7th April 2018 at 3rd International Conference on Design, Analysis, Manufacturing and Simulation at Saveetha School of Engineering, Chennai.
  2. Pranita Adsul, Kotebavi Vinod, Bedekar Sanjeev and Mishra Ashwini presented a paper titled, “A simulation study of cooling system for heavy duty diesel engine” during 6th- 7th April 2018 at 3rd International Conference on Design, Analysis, Manufacturing and Simulation at Saveetha School of Engineering, Chennai.
  3. D. Sahu and Praveen Alok, presented a paper titled, IConMMEE 2018/ IOP Science conference proceedings/ MITE Mangalore on 2nd March 2018.
  4. Shasa A. Antao, Vishnu S. Nair, Rajeevlochana G. Chittawadigi published a paper named Methodology to Determine Counterweights for Passive Balancing of a 3-R Orientation Sensing Mechanism using Hanging Method in 3rd International and 18th National Conference on Machines and Mechanisms (INaCoMM2017) at Bhabha Atomic Research Centre (BARC), Mumbai, Dec 2017
  5. Shasa A. Antao, Vishnu S. Nair , Rajeevlochana G. Chittawadigi published a paper named Applications of a 3-Revolute Orientation Sensing Mechanism (3-ROSM) in Controlling a Camera in 5th IFToMM International Symposium on Robotics & Mechatronics (ISRM 2017) at Western Sydney University, Parramatta Campus, Sydney, Australia, Nov 2017
  6. B Raviteja, A Hemateja, A Dileep Kumara, Rakesh S G published a paper Influence of nose radius of blunt cones on drag in supersonic and hypersonic flows in International Conference on Materials, Alloys and Experimental Mechanics (ICMAEM) - 2017 / (Institute of Physics) IOP Conference (to be Scopus indexed) / Narsimha Reddy Engineering College, Hyderabad, July 2017.
  7. Vaibhav Gupta, Rajeevlochana G. Chittawadigi and Subir K. Saha published a paper RoboAnalyzer: Robot Visualization Software for Robot Technicians in Advances in Robotics (AIR2017), 3rd International Conference of Robotics Society of India at IIT Delhi, New Delhi, May June 2017
  8. B.Dinesh, M.Sai, K.Dishal, Debjyoti Sahu, presented a paper titled, “A case study of a low power vapour adsorption refrigeration system”, at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series: Material Science and Engineering during the month of Oct 2016, 149(1), 2016, ISSN: 1757-899X.

  9. Praveen R, Shabari Girish K.V.S , Debjyoti Sahu, presented a paper titled, “A case study on solar vapour absorption refrigeration system”,at an International Conference PNFE-2016, held at St. Joseph College of Engineering, Hyderabad;published in Energy Procedia.

  10. Akhil.J,Sreekanth N presented a paper titled, “Design and analysis of secondary spike on blunt head”,at an International conference AMMMT-2016,IJST,S.I.T,Tumkur on 24th Sept 2016.

  11. Divaker Shetty A.S., Ravishankar Shukla, presented a paper titled, “Performance and emission characteristics of CRDI engine working on plastic oil”,at an International conference AMMMT-2016,IJST,S.I.T,Tumkur on 24th Sept 2016.

  12. Vinod Kotebavi, Sunil Kumarpresented a paper titled“Performance analysis of a diesel engine fuelled with blends of neem and simarouba oil”,at an International conference AMMMT-2016,IJST,S.I.T,Tumkur on 24th Sept 2016.

  13. S. R. NagaraJa, Aathira M Nair,presented a paper titled “Simulation and analysis of protrusions on flat plate at hypersonic speeds”,at an International conference AMMMT-2016,IJST,S.I.T,Tumkur on 24th Sept 2016.

  14. Vinod Kotebavi, Hitesh.U. Warrier, presented a paper titled,“Heat Transfer Enhancement in solar Air Heater Duct Fitted with Punched Hole Delta Winglets”,at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series:Material Science and Engineering during the month of Sept 2016.

  15. Vinod Kotebavi, Harikrishnan S S, presented a paper titled, “Performance Study of Solar Heat Pipe with Different Working Fluids and Fill Ratios”,at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series: Material Science and Engineering during the month of Sept 2016.

  16. SandeepKoundinya, Vignesh Kumar N, A.S.Krishnan, presented a paper titled, “Computational and Experimental study of fluid flow and heat transfer characteristics in porous media”, at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series: Material Science and Engineering during the month of Sept 2016.

  17. Smita Singh,Basavanagowda, M.U.Aswath, R.V. Ranganath,Presented a paper titled “Durability of Bricks Coated with Red mud Based Geopolymer Paste”,at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series: Material Science and Engineering during the month of Sept 2016.

  18. Shali S, Nagaraja S R, Jafarali P, Presented a paper titled “Non-uniform Beam Vibration using Differential Transform Method”, at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series:Material Science and Engineering during the month of Sept 2016.

  19. B. P. Harichandra,Mrudula Prashanth, S. V. Prakash, Presented a paper titled,“Evaluation of fatigue properties of EN31 steel heat treated using biodegradable gingili oil”, ”,at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in IOP conference series: Material Science and Engineering duringthe month of Sept 2016.

  20. Smitha Singh, M. U. Ashwath, R. V. Ranganath,presented a paper titled “Durability of Red mud Based Geopolymer Paste in Acid Solutions”, in an International Conference on Civil Engineering and Materials Science (ICCEMS 2016)NTU, Singapore, on 2nd May 2016./SCOPUS Indexed/

  21. Dileep B.P and Ravi Kumar V, presented a paper titled,”A comparative study on mechanical properties of heat treated EN24  alloy steel and its MMC” held during 30th to 31st March 2016 at International conference on Mechanical Engineering Researches and Intelligence technologies(ICONMERIT 2016) held at Nehru Institute of Engineering and Technology, coimbatore, India.Scopus Indexed.

  22. Basavaraj Noolvi, presented the paper titled,"Actively Tuned Vibration Absorber using Smart Adaptive Composites” held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  23. Sandeep Koundinya, Vignesh Kumar N and A.S. Krishna, Presented a paper titled,”Experimental study and comparison with computational study on cooling of PV solar panel using finned heat pipe technology”, held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  24. Mohan Kumar and Pramod R, presented a paper titled,”Evaluation of Mechanical and Wear Properties of Aluminium AA430 Reinforced with SiC and Mgo”held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  25. Ulhas K Annigeri and Veeresh G.B., presented a paper titled, “Method of stir casting of Aluminium metal matrix compostites-A Review” held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  26. Prashanth. B.N and R Venkatram presented a paper titled,”Development of Modular Integration Frame workbetween PLM and ERP Systems”held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  27. Shashi Kumar M.E and Pramod R presented a paper titled,”Evaluation of Mechanical and Insulation Properties of Nomex-T410 and H S Glass Polymer Matrix  composites”held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  28. M. V. PhanibhushanaC.N. Chandrappa, Niranjan .H. Bpresented a paper titled,”Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites”held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed.

  29. T. Srinivas Rao presented a paper titled,” A Comparative Evaluation of GA and SA TSP in a Suppply Chain Network” held during 12th -13th March 2016 at 5th International conference on Material Processing and characterization organised at Department of Mechanical Engineering, Gokaraju Rangaraju Institute of Engineering and Technology (GRIET), Hyderabad, Telengana in collaboration with Maulana Azad National Institute of Technology (MANIT), Bhopal, India. Scopus Indexed

  30. Sujith Sai, Anish, Dileep B.P, presented a paper titled, “Investigation of mechanical properties of Al6082-nickel composites” held during 29thFebruary 2016to 3rd March 2016 at International Conference on Energy Environment and Engineering (ICEEE 2016) at Coimbatore Institute of Technology, Coimbatore.

  31. Mr. Vinod Kotebaviand Mr. Ganesh.A presented a paper titled, “Pyramid Type Solar Still Coupled with Evacuated tubes” at 2016 Biennial International Conference on Power and Energy Systems: Towards Sustainable Energy (PESTSE) held during 21st to 23rd January 2016 organized by Department of Electrical and Electronics Engineering, Amrita Vishwa Vidyapeetham, Bangalore in association with IEEE Bengaluru section and IEEE Power & Energy society Bengaluru chapter.

  32. RatanSadanand O M, Ravi Prakash Joshi, Rajeevlochana G. Chittawadigi and Subir Kumar Saha presented a paper titled,”Virtual Experiments for Integrated Teaching and Learning of Robot Mechanics using RoboAnalyzer” held during 6th to 9th January 2016 at 28th International Conference on CADCAM, Robotics and Factories of the Future (CARS-FOF 2016) held at College of Engineering and Management, Kolaghat, West Bengal, India.

  33. RakshithLokesh, Rajeevlochana G. Chittawadigi and Subir K. Sahapresented a poster on a paper titled, ” MechAnalyzer: 3D Simulation Software to Teach Kinematics of Machines" at the 2nd International and 17th National Conference on Machines and Mechanisms (iNaCoMM2015) during 16-18th December 2015 at IIT Kanpur, Kanpur.

  34. ShamanthHampali, Rajeevalochana G. Chittawadigi and Subir K Saha presented a paper titled,” MechAnalyzer: 3D Model Based Mechanism Learning Software" at 14th World Congress in Mechanism and Machine Sciences(IFToMM World Congress 2015) at Taipei, Taiwan, during October 25-30, 2015.

  35. Sreekanth K M, DebjyotiSahu, published a research article titled, “Effect of Iron Oxide nanoparticle in bio digestion of portable food waste digester” in the Journal of chemical and Pharmaceutical Research, 2015, 7(9):353-359 during September 2015. Scopus impact factor: 0.75

  36. Y P Deepthi, K Prakash Marimuthu, K Raghavendra Ravi Kiran, presented apaper titled, “Performance test of cryogenically treated and coated tungsten carbide cutting inserts”,in anInternational Conference on Mechanical and Manufacturing Engineering ICMME-2015 held at SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kanchipuram, Tamil Nadu during 2/4/15 to 3/4/15.

  37. R Pramod, Shashi Kumar M E,Mohan Kumar S, presented a paper titled, “Finite Element Model Development for Structural Integrity of Shafts with Circumferential and Arbitrary Oriented Cracks", in anInternational Conference on Mechanical and Manufacturing Engineering ICMME-2015 held at SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kanchipuram, Tamil Nadu during 2/4/15 to 3/4/15.

  38. R Pramod, ShashiKumar M E, Mohan Kumar S, presented a paper titled “Modal Analysis of Annular Plate with Crack and its Effect on Natural Frequency", in an International Conference on Mechanical and Manufacturing Engineering ICMME-2015 held at SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kanchipuram, Tamil Nadu during 2/4/15 to 3/4/15.

  39. Dr.TatavartySrinivas Rao, GopiSampangi, presented a paper titled, “Solving a Reverse Supply Chain TSP by Genetic Algorithm”, in an International Conference on Mechanical and Manufacturing Engineering ICMME-2015 held at SRI CHANDRASEKHARENDRA SARASWATHI VISWA MAHAVIDYALAYA, Kanchipuram, Tamil Nadu during 2/4/15 to 3/4/15.

  40. Sreekanth K.M., and Dr. DebjyotiSahu presented a paper titled “Energy Analysis of Biogas Digester and Effect of Iron Oxide Nanoparticle in Bio Digestion”at an International conference on Nanotechnology(ICNT2015) and Indo-USA join symposium on New Approaches to Energy Harvesting: Alternative to fossil fuel at Haldi Institute of Technology, Haldia, PurbaMedinipur, WestBengal, India.[Abstract]

  41. Mr.MohanKumar.S presented a paper titled,“Evaluation of Fracture Toughness and Mechanical Properties of Aluminum Alloy 7075, T6 with Nickel Coating” which was held during 8th-10th Dec 2014 at 12th Global congress on Manufacturing and Management at VIT University, Vellore.

  42. Mr.Balasubramanya.H.S presented a paper titled, “Study and Analysis of Composite Elbow subjected to Internal Pressure and Bending Moment” which was held during Dec 19th -20th Dec2014 at an International conference on Polymer Composites[under Technical Education Quality Improvement Program(TEQIP Phase-II)], National Institute of Technology, Karnataka, Surathkal,Mangalore-575 025

  43. Mrs.Smitasingh presented a paper in a International conference on Sustainable Civil Infrastructure titled, “Experimental Investigation on Red mud Based Geopolymer Mortars” held during 17th and 18th October 2014.

  44. Shali  S,Nagaraja S R, Jafarali P, presented a paper in titled, “ Analysis of natural frequency using differential transform method”, held during 21-23rd Aug 2014 at an International Conference on Mechanical Engineering held at Vijaya Vittala Institute of Technology, Bengaluru  and published in Elsveir Publications.

  45. Yashwanth B, Naveen V, Vinayaka Moorthy N, Nagaraja S R presented a paper titled, “ Waste heat recovery by thermo-electric generation”, held during 21-23rd Aug 2014 at an International Conference on Mechanical Engineering held at Vijaya Vittala Institute of Technology, Bengaluru  and published in Elsveir Publications.

  46. Phanibhushana, Dileep B P,Mrudula Prashanth,Vinod Kotebavi presented a paper tiltled, “Evaluation of Mechanical Properties of Al 2618 Hybrid composite reinforced with SiC and E-glass”, held during 21-23rd Aug 2014 at an International Conference on Mechanical Engineering held at Vijaya Vittala Institute of Technology, Bengaluru  and published in Elsveir Publications.

  47. Ulhas K Annigeri,YP Deepthi, Raghavendra RaviKiran K presented a paper tiltled, “Development of Stage tools for side panel of an automobile”, held during 21-23rd Aug 2014 at an International Conference on Mechanical Engineering held at Vijaya Vittala Institute of Technology, Bengaluru  and published in Elsveir Publications.

  48. Mohan kumar. S, Pramod R presented a paper tiltled, “Evaluation of Mechanical Properties of Hybrid composite Reinforced with SiC and MgO”, held during 21-23rd Aug 2014 at an International Conference on Mechanical Engineering held at Vijaya Vittala Institute of Technology, Bengaluru  and published in Elsveir Publications.

  49. Aditya Kumar, Nagaraja S.R presented a paper titled, “Maximum Permissible Ground Testing Durations for Various Thermal Barrier Coatings in a solid Rocket Model”, at an International Mechanical Engineering Congress (IMEC),National Institute of Technology, Tiruchirapalli, Tamilnadu, India held during 13-15th June 2014.

  50. Dileep B P, Ravi Kumar V, Mrudula Prashanth, Phanibhushana M V presented a paper titled, “Effect of Zinc coating on mechanical properties of Al7075”, at an International Mechanical Engineering Congress-IMEC, held at NIT, Trichy, during 13th to 15th June 2014.

  51. Kottakota Kalasagarreddi, Sobhan Prem Sai  Koppuravuri, Gundu Vinay Kumar, Phanibhushana M.V,  Prakash Marimuthu K, presented a paper titled , “Mathematical  Analysis on E-Glass Fiber and Silicon Carbide Reinforced Aluminum2618 Hybrid Composite”, in an International Conference on Innovations and Emerging Trends in Mechanical Engineering at Nagarjuna College of Engineering and Tech, Bengaluru on 13th June 2014.

  52. Likhith N, Bharat P C, Praveen Kumar A, Vinod kotebavi, presented a paper titled, “Study of performance and emission characteristics of diesel engine fueled with waste cooking oil biodiesel”, at an International Conference on Innovations and Emerging Trends in Mechanical Engineering at Nagarjuna College of Engineering and Technology, Bengaluru on 13th June 2014.

  53. Veeresh Kumar G. B., Pramod R., "Artificila Neural Networks For Predicting the Tribological Behavior of Al7075-SiC Metal Matrix Composites", during 24th - 25th May 2014, at International conference on Advances In Engineering and Technology (ICAET’14), organized by Institute of Research Engineers and Doctors & Rourkee Institute of Technology in Association with Uttarakhand Technical University at Roorkee, India.
  54. Shashi Kumar M. E., Pramod R. presented a paper titled, "Experimental Investigations on Mechanical and Insulation Properties of Nomex and High Silica Polymer Matrix Composite", on 2nd and 3rd of May 2014 at International Conferences on Advances in Engineering and Technology, held at E. G. S. Pillay Engineering College, Nagapattinam, Tamilnadu, India.
  55. Prashanth B. N., Pramod R., presented a paper titled, "Waste Segregation System using Automatic Garbage Bin" on 2nd & 3rd May 2014 at IEEE International Conference on Advances in Engineering and Technology (IEEE – ICAET – 2014) held at E. G. S. Pillay Engineering College, Nagapattinam, Tamilnadu, India.
  56. Mohan Kumar, Pramod R., presented a paper titled, "Investigation of Mechanical and Fracture Properties of Electroplated High Strength Aluminum 7075, T6 Alloy" during 2nd -3rd May 2014 at an International Conference on Advances In Engineering and Technology (ICAET’14), organized by Institute of Research Engineers and Doctors & Rourkee Institute of Technology in Association with Uttarakhand Technical Univeristy at Roorkee, India.
  57. Mr. Ulhas K Annigeri, Mrs. Deepthi. Y. P, Mr. Raghavendra RaviKiran, presented a paper titled, "Design and Development and Analysis of Forming Tool for Side Panel Of an Automobile" on 5th April 2014 at an International Conference on Computer Science and Mechanical Engineering, (ICCSME), Pondicherry.
  58. Mr. Balasubramanya, H. S, & Mr. Ravi Kumar V. Assistant Professors’ presented a paper titled, "Wear Rate Behavior of As-cast and Heat Treated Hybrid Aluminum Metal Matrix Composites" at International conference on advances in Materials and Manufacturing Engineering (ICAMME-14) at NITK , Surathkal, Karnataka, held during 27th-29th March 2014
  59. Mr. Ravikumar. V, Mr. Balasubramanya. H. S, Mrs. Mrudula Prashanth & Mr. Ulhas K Annigeri Assistant Professors’ presented a paper titled "Characterization of A356/SiCp/Gr Metal Matrix Composites" at an International Conference on Advances in Engineering Technology and Management-2014(ICAETM-14) at NPR college of Engineering and Technology, Natham, Tamilnadu, held during 28th -29th March 2014
  60. Mr. Prashanth B N and Mr. Pramod R presented and exhibited a poster on "Waste Segregation System using Automated Garbage Bin" at IMTEX 2014 - 16th Indian Metal-cutting Machine Tool Exhibition with International Participation from 23rd to 28th January 2014 at Bangalore International Exhibition Centre (BIEC), Bangalore, India.
  61. Mr. Akhil. J , Assistant Professor, presented a paper titled "Numerical modeling of steam condensation"at the 22nd national and 11th international ISHMT-ASME(Indian Society of Heat and Mass Transfer-American Society of Mechanical Engineers )Heat and Mass Transfer conference held at IIT Kharagpur from 28 -31Dec 2013.
  62. Dr. T. Srinivas. Rao , Associate Professor , presented a Paper on " Design of Genetic Algorithm for a Web Based Aggregation Model" at the 46th Annual Convention of Operational Research Society of India ( ORSI)held at Department of Statistics University of Kashmir, Srinagar from October 19-23, 2013.
  63. P. Krishnakumar; K. Prakash Marimuthu; K. Rameshkumar; K. I. Ramachandran has published a paper on "Finite Element Simulation of Effect of Residual Stresses during Orthogonal Machining using ALE Approach" in the International Journal of Machining and Machinability of Materials, 2013, Vol. 14, No. 3, pp. 213-229; Index: Scopus
  64. V. Ravi Kumar, et. al, "Electrical Properties of CNT’s & CNF’s: A Comparative Study", International INDO-CANADIAN Symposium on Nano Science & Technology, 20th - 21st February 2013, NIE, Mysore.

  65. Bhanu Prakash S and Deepthi Y P, "Enhancing the Life of Tungsten Carbide Insert by Cryogenic Treatment", International Conference on Advances in Manufacturing Technology, 15th to 17th June 2012, Chennai Institute of Technology, TN.
  66. G. B. Veeresh Kumar, "Prediction on Wear of Al7075-Al2O3 MMCs using Artificial Neural Networks", International Conference on Advances in Mechanical, Manufacturing and Building Sciences, 9th to 11th January 2012, VIT, Vellore.
  67. Shashi Kumar and Pramod R, "Finite Element Modelling and Analysis of Drilling of GFRP/CFRP Composites", Joint International Conference on Advanced Materials, 19th and 20th Aug- 2011, B. T. L Institute of Technology, Bangalore.
  68. G. B. Veeresh Kumar, "Combined Effect of T6 Heat Treatment and Reinforcements on Tribological Properties in Al6061/WC /Gr Metal Matrix Hybrid Composites" at a Joint International Conference on Advanced Materials, 19th and 20th Aug-2011, B. T. L Institute of Technology, Bangalore.
  69. Janaki. R, Mrudula Prashanth & V. Ravikumar, "Application of DOE Techniques in the Development of a Robust Simulation Model for the Analysis and Optimization of System Performance", Joint International Conference on Advanced Materials, 19th and 20th Aug, 2011, B. T. L Institute of Technology, Bangalore.
  70. Shashi Kumar M E, B. N. Prashanth and R. Pramod, "Finite Element Validation and Calibration of a Modified SENT Specimen to Study Fracture", InternationalConference on Advances in Engineering and Technology, 27th -28th May-2011, E G S Pillai Engineering College, Nagapattinam.
  71. R. Pramod, Shashi Kumar M E and B. N. Prashanth, "An Investigation on Drillability of GFRP/CFRP Composites Using Design of Experiments", International Conference on Advances in Engineering and Technology, 27th-28th May-2011, E G S Pillai Engineering College, Nagapattinam.
  72. B. N. Prashanth, R. Pramod and Shashi Kumar M E, "Exchange of Data between PLM and ERP Systems through Middleware Integration", International Conference on Advances in Engineering and Technology, 27th-28th May-2011, E G S Pillai Engineering College, Nagapattinam.
  73. Pramod R, "FEM Model for Measurement of Hardness of INCONEL 718 Coatings", International Conference on Recent Advances in Mechanical Engineering, 22nd April 2011, M. G. R. Educational and Research Institute University, Chennai.
  74. Veeresh Kumar G. B, "Mechanical & Tribological Properties of Al6061-Tungsten Carbide-Graphite Hybrid Metal Matrix Composites", International Conference on Recent Advances in Mechanical Engineering, 22nd April 2011, M. G. R. Educational and Research Institute University, Chennai.
  75. Mohan Kumar S and Dileep B. P, "Characterization of Electroplated High Strength Alluminium Alloy 7075-T6", International Conference on Design and Advances in Mechanical Engineering, 22nd April 2011, SKP Engineering College, Thirurannamalai, TN.
  76. Pramod R, "FEA of Aluminium Based MMCS and HMMCs", International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences, 18th and 19th Nov 2010, SIT, Tumkur.
  77. Pramod R and Prashanth BN, "Integrating Winchill PLM with ERP", International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences, 18th and 19th Nov 2010, SIT, Tumkur.
  78. Vinod Kotebavi, "Performance Evaluation of a CI Engine Fueled with Biodiesel and Vegetable Oil Blends", International Conference on Total Engineering, Analysis & Manufacturing Technologies, 19th to 21st Nov-2009, Bangalore University.
  79. Prakash Marimuthu, "Lead Time Reduction in Cupellation of the Fire Assaying Process", International Conference on Total Engineering, Analysis & Manufacturing Technologies, 19th to 21st Nov-2009, Bangalore University.
  80. Rakesh S. G, "Micro Blast Wave Assisted Bacterial Cell Transformation", International Symposium on Shock Waves, 19th to 24th July-2009, St. Petersburg, Russia.
  81. Rakesh S. G and Nagaraja S. R, "Studies on Forming of Thin Metal Foils for Bio-Medical Applications of Shock Waves", International Symposium on Shock Waves, 19th to 24th July-2009, St. Petersburg, Russia.
  82. T. Srinivas Rao, "Design of Web Based Aggregation of Materials in a Supply Chain Network", International Conference organized by Operational Research Society of India, 15th to 17th Dec 2008, S. V. University, Tirupati.
  83. Vinod Kotebavi, "Web Based ERP Model for Product Requirement Planning", International Conference on Advances in Mechanical Engineering-2008, 15th to 17th Dec 2008, NIT, Surathkal.
     
  1. Pala Tejesh, Pamarthi Shyam, P Siva Durga Prasad, and Vinod Kotebavi presented a paper titled, “Comparison of Performance and Emission Characteristics of a CI Engine Fuelled with Dual Blends: Palm, Sesame oils and Diesel” during 28th April 2018 at 2nd National conference on Automotive systems Design, Manufacturing and Integration (ASDMI18)
  2. Praveen Alok, D. Sahu presented a paper titled, “Experimental study on vapor adsorption refrigeration system with carbon-methanol pair during 2nd March 2018 IConMMEE 2018, at MITE Mangalore, published in IOP Science conference proceedings.
  3. T. Vasudevanand Rakesh S.G. presented paper titled,“Calibration of Hypersonic Test Facility at Amrita School of Engineering, Bengaluru” held during 25th to 26th February 2016 at 4th National Symposium on Shock Waves (NSSW-4) at Karunya Institute of Technology and Sciences, Coimbatore.
  4. Debanshu Basu, Vinod Kotebavi, presented a paper titled, "Integration of Selective Catalytic Reduction Components in the Engine Dynamometer Test Bench", on 13th May at MECH Manthana /Darshana 2014, organized by FOSAMECH (Forum of Sambhram Mechanical ) in co-ordination with Department of Mechanical Engineering
  5. Jayanth. P. V,Ashwin. A, R. Sivaraman,R. Pramod, has presented a paper titled, “Design And Fabrication Of Amphicraft -A Multi-Environment Surveillance Vehicle”,held on 9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  6. PallerlamudisaisriHarsha( S8) Udaykumar(S8) Pramod.R, has presented a paper titled, “Design and development of Tesla Turbine”, held on 9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  7. Pramod R,M DattaSandesh(S8),M Sandeep(S8) Jayaram, KottakotaKalasagarreddi(S8), has presented a paper titled, “Design And Development Of Wind Turbine Based Hybrid Fruits And Vegetables Preservation Unit”, held on 9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  8. Devathi Yadhunandana Sandeep Kumar( S8),Harshavardhan(S8) Jayankreddy(S8) PrasadamVamsi(S8) Pramod.R, has presented paper titled, “Design and Fabrication of Pot-Hole Road repair machine”,held on 9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  9. Akhila (S8),RameshBabu(S8) Abhijeet(S8), Prakash Marimuthu, has presented a paper titled, “Tsunami Wave Impact on Structures”,on9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  10. Mrudula Prashanth, has presented paper titled, “Evaluation of Mechanical Properties of EN31 Steel Heat treated using Biodegradable oil”, held on 9/5/2015 at National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering(AMESHE 2015) held at Knowledge Institute of Technology, Salem, Tamilnadu, India.
  11. Shashi Kumar M. E., Nadeem M., C. sai kamesh, presented a paper titled "Design of an Eco-friendly Pneumatic Engine for Reduced Fuel Consumption Approach" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  12. Deepak Ravi, Samta Phulli, Darshan Hegde, Prakash Marimuthu, presented a paper title "A Heuristic to Solve Vehicle Routing Problems with Time Slots" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  13. D. Gopi Krishna, D, Sheshu Babu, D. Srikanth Reddy, Mrudula Prashanth, presented a paper title "The Effect of Deep Cryogenic Treatment on Mechanical Properties of Al-SiC Composite" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  14. Varun Rahul, Paras Lokhande, Pramod R., presented a paper title "Cerberus-Amphibious Rescue Vehicle" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  15. B. Arjun Nataraj, ArunSiddarth S., Karthikeyan S., Pramod R., presented a paper title "Design and Development of Automobile Driving Mechanisms for Disabled Arm People" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  16. Jayanth P. V., Ashwin R. Sivaraman R., Pramod R., presented a paper title "Design and Fabrication of Amphicraft" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  17. Muralikrishna U., Vishnu S., RohitNambiar, MedhasKerkar, R. Pramod, presented a paper title "Design and Fabrication of Metal Chip Compaction Machine" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  18. Arjun Murali, E. P. Subash, Harish P., Pramod R., presented a paper title "Design of a Foldable Chassis Vehicle and Steering Mechanism" at a National Conference held on 25th April 2014 at T. John Institute of Technology, Bangalore.
  19. Mrs. Mrudula Prashanth, presented a paper on "The Effect of Retrogression and Reaging Treatment on Properties of 7010 Aluminium Alloy forgings" on 27th sept 2013 at a National Conference on challenges in research and technology in the coming decades at Sree Dharmasthala Manjunatheshwara Institute of Technology, Ujire.
  20. Bhanu Prakash S and Deepthi Y P, "Effect of Double Tempering after Cryogenic Treatment on Coated Inserts", National Conference on Emerging Research and Advances in Mechanical Sciences, 23rd March 2012, Velammal Engineering College, TN.
  21. Nagaraja S. R, "Investigations on Forming of Thin Metallic Plates subjected to Shock Wave Loading", 2nd National Symposium on Shock Waves, 27th& 28th February, 2012, Periyar Maniammai University, Thanjavur.
  22. R. Pramod, "An Experimental Investigation on Drillability of GFRP/CFRP Composites", National Conference on developments in Composite Materials and Processes, 8thApril 2011, Don Bosco Institute of Technology, Bangalore.
  23. R. Pramod, "Influence of Drilling and Material variables on Thrust force", National Conference on Recent Advancement in Engineering and Technology, 25th March 2011, Dr. Thimmaiah Institute of Technology, KGF, Kolar
  24. Vinod Kotebavi, "Performance Analysis of a Variable Compression Ratio Engine using Petrol Ethanol Blends", National Conference on Recent Advancement in Engineering and Technology, 25th March 2011, Dr. Thimmaiah Institute of Technology, KGF, Kolar.
  25. B. N. Prashanth, R. Pramod and Shashi Kumar M E, "Integration Frame work for portability of data between PLM with ERP systems", National Conference on AMMMT, 3rd& 5th Jan-2011, Manipal University, Manipal.
  26. R. Pramod, "Influence of Drilling and Material variables on Thrust force", National Conference on Recent Advancement in Engineering and Technology, 25th March 2011, Dr. Thimmaiah Institute of Technology, KGF, Kolar.
  27. Vinod Kotebavi, "Performance Analysis of a Variable Compression Ratio Engine using Petrol Ethanol Blends", National Conference on Recent Advancement in Engineering and Technology, 25th March 2011, Dr. Thimmaiah Institute of Technology, KGF, Kolar.
  28. B. N. Prashanth, R. Pramod and Shashi Kumar M E, "Integration Frame work for portability of data between PLM with ERP systems", National Conference on AMMMT, 3rd& 5th Jan-2011, Manipal University, Manipal.
  29. Vinod Kotebavi and M V Phanibhushana, "Study of performance and emission characteristics of a Diesel Engine fuelled with Bio diesel and vegetable oil blends", National Conference on Recent Trends in Mechanical Engineering during 23rd to 24th Nov, 2009 at Vemana Institute of Technology, Bangalore.
  30. Mr. Debjyothi Sahu and Ravi Kumar V "Fundamentals of gas turbine combustion and simulation of small holes used in gas turbine dome", National Conference on Recent Trends in Mechanical Engineering during 23rd to 24th Nov, 2009 at Vemana Institute of Technology, Bangalore.
  31. Debjyoti Sahu, V Ravi Kumar and Aravind Kumar M S, "Simulation of small holes used in Gas Turbine Dome", National Conference on Thermal, Fluid and Energy Engineering, 23rd to 24th Nov-2009, MAE, Alandi, Pune.
  32. Debjyoti Sahu and Aravinda Kumar M S, "The Numerical Modeling of Fatigue Behavior In Fiber Reinforced Composite", National Conference on Sustainability and Social Comfort Strategizing (NCOSASC‐2009), 19th & 20th Jan-2009, VNRVJIET, Hyderabad.
  33. Panibhushana M V, Vinod Kotebavi and Ravi Kumar V, "Comparison of Performance and Emissions from Diesel Fuel and its Blends in C. I. Engine", National Conference on Trends & Developments in Renewable Energy Sources, 26th& 27th Feb-2009, ACE, Hosur.
  34. Debjyoti Sahu and Aravinda Kumar M S, "The Numerical Modeling of Fatigue Behavior In Fiber Reinforced Composite", National Conference on Sustainability and Social Comfort Strategizing (NCOSASC‐2009), 19th& 20th Jan-2009, VNRVJIET, Hyderabad.
  35. S. R. Nagaraja, "Experimental Investigation of Shock Wave Loaded Metal Plates", National Convention of Aero Space Engineers, 26th-28th Nov-2008, BIT, Ranchi.
     
  1. Smita Singh, Aswath M. U, Ranganath R.V, published a paper titled, “Effect of Mechanical Activation of Red Mud on The Strength of Geopolymer Binder”, in the Journal Construction and Building Materials, Elsevier Publication, May 2018, Impact factor 3.2
  2. Shali S, Jafarali P, Nagaraja S R, published a paper titled “Identification of second spectrum of a Timoshenko beam using differential transform method” in Journal of Engineering Science and Technology, Vol.13, No.4, 893-908, during April, 2018
  3. Ravi Kumar V and Prakash k R published a paper titled,” Mathematical modeling of unsaturated isophthalic resin’s curing cycle”, in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD) ISSN (P): 2249-6890; ISSN (E): 2249-8001,Vol. 8, Issue 2, Apr 2018, 805-810
  4. Prakash Marimuthu K, Thirta Prasad H.P. published a paper titled, “3D Finite Element Model to predict machining induced residual stresses using ALE approach” in an International Journal ,Journal Of Engineering Science and Technology, School of Engineering, Taylor’s University, Vol.13, Issue 2, Feb 2018.
  5. Prakash Marimuthu K, Srinivas Rao. T, published a paper titled “An Ant colony approach to solve a vehicle routing problem in a FMCG company”, in International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), Feb 2018.
  6. Mohammed A N, Jithin E V, Dinesh Kumar L, Ratan Kishore V, Mohammed A, published a paper titled, “On the tip opening of burner stabilized flames” in an International Journal, Energy and Fuels; ACS Publications 32 (2),pp.2344–235.,Feb 2018.
  7. Rakesh. S. G, Rajesh. R published a paper Effect of dimensions of sharp spiked cylinder on the buzz phenomenon subjected to hypersonic flows in International Journal of Fluid Mechanics Research, Jan 2018.
    Phanibhushana M. V, C.N. Chandrappa, H.B. Niranjan published a paper Characterisation ofAl6061-Fe2O3 metal matrix composites subjected to severe plastic deformation for multiple passes through equal channel angular pressing in International Journal of Mechanical Engineering and Technology (IJMET), Jan 2018
  8. Atluri Praneeth, Pramod Kumar K V S, Raghavendra Ravikiran, Prakash Marimuthu K published a paper Evaluation of briquettes made of biodegradable materials as an alternate source of energy in International Journal of Mechanical Engineering and Technology (IJMET), Dec 2017
    Dipin Krishna, Jyothish, Ajai Anil Kumar, Subramanian, Mohan Kumar S, Ravi Kumar V. published a paper Electrochemical corrosion studies and mechanical characterization of al7050 metal matrix composite reinforced with zro2 particulate by stir casting method International Journal of Mechanical Engineering and Technology (IJMET), Dec 2017.
  9. Smita Singh, Aswath M.U, Ranganath, R.V. published a paper Effect of curing methods on the property of red mud based geopolymer mortar in International Journal of Civil Engineering and Technology IAEME, Nov 2017
  10. Anirudh , Vigneswaran , R Pramod,G B Veeresh Kumar published a paper Influence of Titanium Diboride and Graphite Reinforcement on the A16061 Alloy in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Shreekhar, Mohan Akhil, Sairam, Venkata Gopaiah, Sandeep Koundinya,S R Nagaraja published a paper Study of effects of shock waves on nanofluids in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Dileep BP , Vitala HR ,Ravi Kumar V, Suraj MM published a paper Effect of ECAP on Mechanical and Micro-Structural Properties Of Al7075-Ni Alloy in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    B.V.N Pramod, J.Prudhvi Raj, Hari Krishnan S published a paper Performance analysis of a solar still coupled with evacuated heat pipes in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Aditya Ranganathan, Akshay Krishnan P V, Akshay S Nambiar, Mohan Kumar S, Ravi Kumar V published a paper Mechanical Characterization of AA7050-TiC Metal Matrix Composites under as Cast as condition in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Mrudula Prashanth, Satish.N, B.S.Ajay Kumar published a paper Effect of Brass and Silver on Mechanical Properties of Copper in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Shankara, S.N. Maya Naik, P.V. Sivapullaiah published a paper Potassium and Solium Ions through Red Earth Soil Using Column Tests in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Y P Deepthi, P V S Subhashini, N. Amulya published a paper Parametric Optimization of Surface Roughness of Deburring Process on Aluminum Alloy Using SCARA Manipulator in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Debjyoti Sahu, Praveen Alok published a paper Flow Analysis of Isobutane (R-600A) Inside and Adiabatic Capillary Tube in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    T. Srinivas Rao published a paper An Evaluation of ACO and GA TSP in a Supply Chain Network in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    K Rameshkumar, C Rajendran published a paper A novel discrete PSO algorithm for solving job shop scheduling problem to minimize makespan in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Phanibhushana M.V., A.N.N.S. Bharath, A.R. Sundeep, A.C. Sharan, A. Sai Pratap Reddy published a paper Characterization of Aluminium Metal Matrix Hybrid Composites Subjected to Equal Channel Angular Pressing in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Phanibhushana M.V., V. Gaurav, Pedro Jacinto , Paramo Kanetas published a paper Hot Deformation Characterization of Haynes - 242 in Advances in Materials and Manufacturing Applications (IConAMMA 2017), Aug 2017.
    Shashi Kumar M.E., R. Pramod, Arun G K, Nikhil Sreenivas, Kesari Brahma Reddy, K Sai Krsishna Reddy published a paper Investigation on Mechanical Properites of Graphene Oxide reinforced Glass fiber reinforced Composites in Advances in Materials and Manufacturing Applications (IConAMMA 2017),Aug 2017.
    B.N. Prashanth, V. Sai Varun, P. Tejesh published a paper Design and Development of Tilting Rotary Furnace in Advances in Materials and Manufacturing Applications (IConAMMA 2017),Aug 2017.
  11. Kartik Balkumar, Abishek V. Iyer, Abishek Ramasubramanian, Kaliyannan Devarajan, Prakash K. Marimuthu published a paper Numerical Simulation of Low Velocity Impact Analysis of Fiber Metal Laminates in Mechanics and Mechanical Engineering Journal, Feb 2017.
  12. Smita Singh, Rahul Das Biswas, Aswath M.U, published paper titled,“Experimental study on RedMud based GeoPolymer concrete with flyash and GGBS in ambient temperature curing”, in International Journal of Advances in Mechanical and Civil Engineering,ISSN:2394-2827/special issue/pages 5-8.
  13. Smitha Singh, M. U. Ashwath, R. V. Ranganath has published a paper titled “Durability of Red Mud Based Geopolymer Paste in Acid Solutions”, Materials Science Forum, Trans Tech Publications, Switzerland/Aug 2016/866/pp 99-105. Index: Scopus.
  14. Debjyoti Sahu, Vinod Kotebavi and Divakara Shetty published paper titled “Performance and Emission Characteristics of a CI Engine run on waste cooking Oil-Diesel blends” in Pollution Research Publications, Vol.35(1)PP 159-166(March2016).Impact Factor: 0.15.
  15. Y.P.Deepthi, K.P.Marimuthu,K.R Ravi Kiran published a paper titled, “Performance test of cryogenically treated and coated Tungsten Carbide Inserts” in Applied Mechanics and Materials, Vols.813-814(2015)pp575-580, Trans Tech Publications, Switzerland. Nov 2015 Doi: 10.4028/ www.scientific.net/AMM. 814-815.575. Scopus Indexed.
  16. S. R. Tatavarthy, G. Sampangi published a paper titled, “Solving A Reverse Supply Chain TSP By Genetic Algorithm” in Applied Mechanics and Materials, Vols. 813-814(2015) pp1203-1207, Trans Tech Publications, Switzerland. Nov 2015.Doi:10.4028/ www.scientific.net/AMM.813-814.1203. Scopus Indexed.
  17. G B Veeresh Kumar, R Pramod published a paper titled, “Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding Wear of Al6061 Alloys” in Applied Mechanics and Materials Vols. 813-814 (2015) pp 67-73, Nov 2015. Trans Tech Publications, Switzerland. Scopus Indexed.
  18. Pramod R, Shashi Kumar M E, Mohan Kumar S published a paper titled, “Modal Analysis of Annular Plate with Crack and its Effect on Natural Frequency” in Applied Mechanics and Materials Vols. 813-814 (2015) pp 910-914, Nov 2015. Trans Tech Publications, Switzerland. Scopus Indexed.
  19. Pramod R, Shashi Kumar M E, Mohan Kumar S, published a paper titled,”Finite Element Model Development for Structural Integrity of Shafts with Circumferential and Arbitrary Oriented Cracks”in Applied Mechanics and Materials Vols. 813-814 (2015) pp 905-909, Nov 2015. Trans Tech Publications, Switzerland. Scopus Indexed.
  20. Pramod R, P. Sai Sri Harsha, K.A. Udaya Kumar. "Design and Development of Tesla Turbine." International Journal of Applied Engineering Research 10, no. 50 (2015): 1122-1127.Research India Publications; httpwww.ripublication.comijaer.htm,Scopus indexed.
  21. Pramod R, M DattaSandesh, M Sandeep Jayaram, KottakotaKalasagarreddi. "Design and Development of Wind Turbine based hybrid fruits and vegetables preservation unit." International Journal of Applied Engineering Research 10, no. 50 (2015): 1217-1222.Research India Publications; httpwww.ripublication.comijaer.htm,Scopus indexed.
  22. Pramod R, D Y Sandeep Kumar, G Jayank Reddy, M Harshavardhan, P Vamsi. "Design and fabrication of Pothole road repair machine." International Journal of Applied Engineering Research 10, no. 50 (2015): 1038-1042.Research India Publications; httpwww.ripublication.comijaer.htm,Scopus indexed.
  23. Jayanth. P. V, Ashwin. A, R. Sivaraman, R. Pramod. "Design and Fabrication of Amphicraft -A multi Environment Surveillance Vehicle." International Journal of Applied Engineering Research 10, no. 50 (2015): 843-847.Research India Publications; httpwww.ripublication.comijaer.htm,Scopus indexed.
  24. Mrudula Prashanth,Harichandra B P, Mahantayya Mahapati, S V Prakash published a paper titled, “Evaluation of Mechanical Properties of EN31 Steel Heat treated using Biodegradable oil”, in International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.50 (2015),pages 1248-1252, Research India Publications; http://www.ripublication.comijaer.htm.Scopus indexed.
  25. P L. Meyyappana, Akhila Roy,AbhijithJ,Ramesh M N V, Prakash Marimuthu K,published a paper titled, “Tsunami Wave Impact on Structures” in International Journal of Applied Engineering Research, ISSN 0973-4562 Vol. 10 No.50 (2015) , pages :1135 -1139, Research India Publications; httpwww.ripublication.comijaer.htm,Scopus indexed.
  26. Mr.Phanibhushana.M.V published a paper titled “A study on the drilling characteristics of E-Glass Fiber and Silicon Carbide Reinforced Aluminium 2618 Hybrid Composite” in International Journal for Research and Development in Technology,Vol 2,Issue-5,Nov2014.Impact factor:0.63
  27. KottakotaKalasagarreddi, GunduVinay Kumar, KasinaVamsi Krishna, AkiletiSupraj, Phanibhushana M.V.published a paper titled,“A Study on the Drilling Characteristics of E-Glass Fiber and Silicon Carbide Reinforced Aluminum 2618 Hybrid Composite” in International journal for Research and Development in Technology, Volume: 2, Issue: 5, Nov -2014 ISSN (Online):- 2349-3585;Impact factor-0.16.
  28. Dileep B P, RaviKumar.V, Mrudula Prashanth and Phanibhushana.M.V published the abstract of the paper “Effect of zinc coating on mechanical properties of Al 7075” in an international publication, Applied Mechanics and Materials, Vols. 592-594(2014)pp255-259,Trans Tech publications, Switzerland.
  29. Shankara, S. N. Maya Naik, Sivapullaiah, S. A. S. Mohammed, published a paper titled, "Sorption of Iron & Copper on Sand-Bentonite -Fly Ash Mixtures" in International Journal of Research in Chemistry and Environment, Vol 4-2 April 2014, pp 1-8. [Abstract]
  30. Shankara, S. N. Maya Naik, P. V. Sivapullaiah, published a paper titled, "Modelling of the Cu and Fe Transport in Sand-bentonite and Sand-fly Ash Mixtures" in International Journal of Earth Science and Engineering, Vol 1-1 February 2014, pp 325-330. [Abstract]
  31. P. Krishnakumar; K. Prakash Marimuthu; K. Rameshkumar; K. I. Ramachandran published a paper tiltled, "Finite element simulation of effect of residual stresses during orthogonal machining using ALE approach" in International Journal of Machining and Machinability of Materials, 2013 Vol. 14, No. 3, pp. 213 – 229; ISSN online: 1748-572X; ISSN print: 1748-5711; Scopus indexed.
  32. Pradeep Hegde, et. al, "Effects of Ambient Heat In-Leak on the Performance of a Three Fluid Heat Exchanges for Cryogenic Applications", International Journal of Heat and Mass Transfer, Vol. 62, March 2013, Page: 567-577. Elsevier Publications.
  33. Rakesh S. G, et. al, "Development of Micro-Shock Wave Assisted Dry Particle and Fluid Jet Delivery System", Journal of Applied Microbiology and Biotechnology, July 2012, Print: DOI 10. 1007/s00253-012-4196-8 Springer - Verlag 2012.
  34. Pramod R, et. al, "Stress Intensity Factor for Arbitrarily Located and Oriented Cracks in a Cylindrical Shell with Tor-Spherical End Closures Subject to Internal Pressure", International Journal of Engineering Research and Applications (IJERA), May-June 2012, Volume: 2, Issue 3, Print: 3057-3071 ISSN: 2248-9622.
  35. G. B. Veeresh Kumar, et. al, "Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles", Journal of Composite Materials, May 2012, Volume: 46, Issue 10, SAGE Publications.
  36. Nagaraja S. R. and Rakesh S. G, "Investigations on Micro-Blast Wave Assisted Metal Foil Forming for Biomedical Applications", International Journal of Mechanical Sciences, April 2012.
  37. G. B. Veeresh Kumar "Studies on mechanical and dry sliding wear of A16061-SiC", Journal of Composites: Part B Engineering, April 2012, Volume: No. 43. Issue 3, Elsevier Publications.
  38. Prashanth B N, Pramod R and Shashi Kumar M E, "Exchange of Date between PLM & ERP System through Middleware Integration", CIIT International Journal of Biometrics and Bioinformatics, Aug-2011, Print: ISSN 0974-9748; Online: ISSN 0974-9632.
  39. Pramod R, Shashi Kumar M E and Prashanth B N, "Finite Element Validation and Calibration of a Modified SENT Specimen to Study Fracture", CIIT International Journal of Biometrics and Bioinformatics, Aug-2011, Print: ISSN 0974 – 9659; Online: ISSN 0974 – 9551.
  40. Veeresh Kumar G. B, "Synthesis and Property Evaluation of Al 7075 – Al2O3 Composites", CIIT International Journal of Biometrics and Bioinformatics, April 2011, Print: ISSN 0974-9675; Online: ISSN 0974-956X.
  41. G. Jagadeesh and Rakesh S. G, "Micro-Shock Waves Mediated Needle-less Vaccine Delivery", International Journal: Micro-Shock Waves Mediated Needle-less Vaccine Delivery, 9th Feb 2011, published on-line.
  42. T Srinivas Rao, et. al., "An Extensive Analysis of Optimal Suppliers with Better Purchasing Period for Customers in Web Based Material Demand Aggregation", International Journal of Compiler and Electrical Engineering, Feb 2010, Volume No. 1, Page No. 1793-8163.
  43. T Srinivas Rao, et. al, "A Novel and Efficient Approach for Materials Demand Aggregation Using Genetic Algorithm", International Journal of Compiler Science and Network Security, April 2009, Volume No. 9, Page No. 4.
  1. Janaki. R, "Design and Development of Automated Digital Indenter for Micro Hardness Measurement", National Journal: Manufacturing Technology Today (MTT), Feb 2010, published on-line.
     
  1. Abhinav.R (Student), Nambiar, DebjyotiSahu, presented a paper titled,"A case study of a low power vapour compression refrigeration system", at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in Material Science and Engineering Conference proceedings during the month of Sept 2016.
  2. Banala Dinesh (Student), Sai Manikanta M, Dishal Kumar T, DebjyotiSahu, presented a paper titled,"A case study of a low power vapour adsorption refrigeration system", at an International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16) held during 14th to 16th July 2016 at Amrita School of Engineering, Bengaluru, and the paper is published in Material Science and Engineering Conference proceedings during the month of Sept 2016.
  3. Articles pertaining to a research work by Dr. Rakesh S. G. titled "Micro-Shock Waves Mediated Needleless Vaccine Delivery" have appeared in
    • Deccan Herald English Daily, November 2009 with the given title "Injection without a Needle"
    • Microbe, a magazine published by American Society for Microbiology with the given title "Needleless Vaccine Device" , February 2011 issue.
    • Mint, a newspaper published by The Wall Street journal with the given title "IISc Designs India’s First Needleless Device"
  4. Tatavarthy Srinivas Rao Balkrishna Rao, Dr N. V. R Naidu, Dr k. Mallikharjuna Babu. "A Novel And Efficient Approach For Materials Demand Aggregation Using Genetic Algorithm", April 2009, Volume No. 9, Page No. 4.
207
PROGRAMS
OFFERED
6
AMRITA
CAMPUSES
15
CONSTITUENT
SCHOOLS
A
GRADE BY
NAAC, MHRD
8th
RANK(INDIA):
NIRF 2018
150+
INTERNATIONAL
PARTNERS