Back close

Time left
for the event

International Conference on Advancements in Materials, Manufacturing & Automation
About

 

Amrita Vishwa Vidyapeetham

Amrita Vishwa Vidyapeetham is a multi-disciplinary, research-intensive, private university, educating a vibrant student population of over 20,000 by 1700+ strong faculty. Amrita offers more than 200 UG, PG, and PhD programs in Engineering, Management, Medical & Life Sciences, Arts & Humanities, Social Sciences and Interdisciplinary Studies. In a short span of 15 years, we have established 180+ collaborations with top 500 world-ranked universities as Amrita is emerging as one of the fastest growing institutions of higher learning in India.

Amrita has been recently accredited with an A++, the highest grade, by the National Assessment and Accreditation Council (NAAC). Amrita has been selected by the Indian Government as an Institution of Eminence (IoE) to be developed into a world-class institution that would put India on the global education map. Amrita’s vision of intellectual social responsibility is the foundation of its research activities. The institution strives to bring about positive change in society through impactful, socially conscious, human-centred research. With seven campuses at Amaravati, Amritapuri, Bengaluru, Chennai, Coimbatore, Kochi, and Mysuru and a new campus at NCR Delhi (Faridabad) and spread over 1200+ acres with 100 lacs square feet of built-up space, Amrita is one of India’s top-ranked private university.

Amrita School of Engineering Chennai

Amrita School of Engineering (ASE), Chennai campus, is located at about 40 KMs away from Chennai and 90 KMs away from Tirupati on the State Highway SH50A in a village named Vengal, has become the place where the future of the Country is being moulded.

ASE is aesthetically spread out on a sprawling 13.55 acres of land with a built-up area of 24,956 sqm, where the dreams of countless engineering aspirants find realisation. ASE, located in close proximity to the Country’s Major Manufacturing and Automobile Hubs (popularly known as The Detroit of Asia), embodies an intellectual ambience to the aspiring young minds who wants to opt Engineering as their career specialization.

Department of Mechanical Engineering

The department of Mechanical Engineering, established in 2019, offers two undergraduate programmes, B.Tech. in Mechanical Engineering and B.Tech. in Automation & Robotics Engineering. The department also offers PhD programs in all the specializations of mechanical engineering.

Department’s strong footprint is attributed to the team of qualified, motivated and experienced faculty members with 100% PhD (either completed or pursuing). Of which 65% have their PhD from reputed Institutes in India like IISc, IITs, NITs and IIITDM Kanchipuram & 30% have International exposure.

The department fosters the flair of the students through a well-designed unique curriculum that caters to the changing needs of the industries and other stakeholders. The department has state-of-the-art research facilities and well-equipped laboratories to support all the academic activities. The department lays significant emphasis on Industry – Institute Interaction activities and has robust Industry-Academia Collaboration Programs.

Conference

In the global competitive customer-centric scenario, the field of Mechanical Engineering is advancing at a rapid pace, and new technologies are emerging in the areas of Materials, Manufacturing, and Automation. The challenges faced by today’s engineers force them to keep abreast of the emerging trends through continuous research and development.

The International Conference on Advancements in Materials, Manufacturing and Automation (AMMA-2023) is aimed to bring researchers, academicians, professional engineers, and industry leaders from all over the world on a common platform to exchange cutting-edge ideas relating to recent developments and advancements in the evergreen fields of materials, manufacturing and automation. The conference will include keynote addresses by eminent people from industry and academia.

Chennai

Chennai is the cultural capital of South India. This 350 years old city has the vibe of young hearts. British had a stronghold on Madras during the independence era and did many good deeds to the city. They were the prime reason for the drastic development of Chennai city, which was once just a forest land.

The northern part of Chennai is primarily an industrial area, and the central part is the commercial heart of the city. Whereas South and west Chennai are mostly residential areas. Kodambakkam is the cinema hub of Kollywood, filled with lots of film industries, studios and cinema sets. Irrespective of the metropolis heart Chennai perfectly balances its old heritage and the modern vibe. It’s a sight to behold the Chennai’s skyline which is brimming with skyscrapers. Once you are in Chennai you will quickly adapt to its hustle bustle and will tend to love its multiface.

Authors

 

Conference Topics

The conference topics include, but not limited to the following broad areas:

  • Material Science and Engineering
  • Materials Manufacturing and Processing
  • Materials properties measuring methods and application
  • Friction, Wear, and Lubrication
  • Nanotechnology & Smart materials
  • Thermal and Fluid engineering
  • Additive Manufacturing
  • Automated & Digital Manufacturing Systems
  • Smart Manufacturing
  • Automation Technology
  • Industrial Automation, IoT & Cyber-Security
  • Robotics & Intelligent Systems
  • Kinematics and Dynamics
  • Advanced Control Techniques
  • Machine Vision & Image Processing
  • Sensors & Biomedical Systems
  • Emerging Materials & AI/ML Applications in Materials Processing & Design
  • Optimization Technique for Industrial Applications

Call for Papers

All accepted, registered, and presented papers will be published in SCOPUS Indexed Conference Proceedings. The exact publisher details will be updated after obtaining the final approval from the publication partners. Please keep visiting this page for more information and updates.

Submit Abstracts

The prospective authors are requested to submit a soft copy of an abstract carrying sufficient information for fair assessment through the easy chair link: https://easychair.org/conferences/?conf=amma2023

Important Dates

Submission of Abstract: 28th February 2023
Notification of Acceptance of Abstract: 5th March 2023
Full Paper Submission: 15th March 2023
Notification of Acceptance of Paper: 25th March 2023
Author Registration and Payment of registration Fees: 5th March 2023
Conference: 7 – 8 April 2023

Registration

Important Dates

  • Submission of Abstract: 28th February 2023
  • Notification of Acceptance of Abstract: 5th March 2023
  • Full Paper Submission: 15th March 2023
  • Notification of Acceptance of Paper: 25th March 2023
  • Author Registration and Payment of Registration Fees: 5th March 2023
  • Conference: 7–8 April 2023

Conference Registration Fees

Indian Delegates from Academic Institutions, R&D Labs, and Industry INR 1500
Foreign Participants fFrom Academic Institutions, R&D Labs, and Industry USD 50

Note

Article publication charges for the publication in the Scopus-Indexed Proceedings/Journals will have to be additionally paid. The charges will depend on the journal and the publisher’s policy. However, the charges to be paid will be communicated to the authors in the paper acceptance letter.

Publication Details

Journals / Proceedings

  1. The papers presented at the conference will be published in any one of the following Journals:
    • Key Engineering Materials (Scopus indexed)
    • Material Science Forum (Scopus indexed)
    • Solid State Phenomena (Scopus indexed)
    • Defect and Diffusion Forum (Scopus indexed)
    • Advances in Science and Technology
    • Applied Mechanics and Materials
  2. The final decision on the publication and the choice of the journal/proceedings will be made by the editorial office of the publication partner based on the quality requirement and scope of the journal/proceedings
  3. The authors are required to pay the publication charges indicated in the table only after getting final acceptance from the publication partner.

Indexing and Article

Name of Journals/Proceedings Indexing
Key Engineering Materials SCOPUS (APC INR 7500)
Material Science Forum SCOPUS (APC INR 7500)
Solid State Phenomena SCOPUS (APC INR 7500)
Defect and Diffusion Forum SCOPUS (APC INR 7500)
Advances in Science and Technology (APC INR 3000)
Applied Mechanics and Materials (APC INR 3000)
Keynote Speakers
Invitation Letter

Program Schedule

Committee

Patrons

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. P. Venkat Rangan

Chief Patron
Vice Chancellor,
Amrita Vishwa Vidyapeetham

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Sasangan Ramanathan

Chief Patron
Dean, School of Engineering,
Amrita Vishwa Vidyapeetham

International Conference on Advancements in Materials, Manufacturing & Automation
Shri I. B. Manikantan

Chief Patron
Director,
Amrita Vishwa Vidyapeetham,
Chennai Campus

International Advisory Committee

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Alokesh Pramanik

Curtin University, Australia

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Christine Georgantopoulou

Bahrain Polytechnic, Bahrain

International Conference on Advancements in Materials, Manufacturing & Automation
Mr. Denis Marchant

Kingston University, United Kingdom

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Drazan Kozak

University of Slavonski Brod, Croatia

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Firoz Alam

RMIT University, Australia

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Kapil Gupta

University of Johannesburg, South Africa

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Manoj Gupta

National University of Singapore, Singapore

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Murali Sundaram

University of Cincinnati, USA

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Paulo Davim J

University of Aveiro, Portugal

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Sergej Hloch

Technical University of Kosice, Slovakia

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Tae-Wan Kim

Seoul National University, Seoul, Korea

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Vijay Shaknar

Volvo Trucks, Sweden

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Vivek Kumar

Ford Motor Company, Dearborn, Michigan, United States

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Xiao-Zhi Gao

University of Eastern Finland, Finland

National Advisory Committee

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Asokan T

Indian Institute of Technology, Madras

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Balan A.S.S

National Institute of Technology Karnataka, Surathkal

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Bibhuti Bhusan Biswal

National Institute of Technology, Meghalaya

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Biranchi Panda

Indian Institute of Technology, Guwahati

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Bobji M.S.

Indian Institute of Science, Bengaluru

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Kamaraj M.

Indian Institute of Technology, Madras

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Lavanya D.L.

Defence Research and Development Organisation, Hyderabad

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Mohan S.

Indian Institute of Science, Bengaluru

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Pravesh Chandra Shukla

Indian Institute of Technology, Bhilai

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Prosenjit Sen

Indian Institute of Science, Bengaluru

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Ramesh Kumar K.

Amrita Vishwa Vidyapeetham, Coimbatore

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Shital S. Chiddarwar

Visvesvaraya National Institute of Technology, Nagpur

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Sounak Kumar Choudhury

Indian Institute of Technology, Kanpur

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Sreekumar M.

Indian Institute of Information Technology, Design and Manufacturing, Kancheepuram

Organizing Committee

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. V. Jayakumar

Convener
Professor
Dept. of Mechanical Engineering,
ASE Chennai

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Abhishek Jha

Organizing Secretary

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. M. Sathishkumar

Organizing Secretary

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. Madhulika Srivastava

Joint Secretary

International Conference on Advancements in Materials, Manufacturing & Automation
Dr. K. L. Vasudev

Treasurer

Program Committee

Explore

Marina Beach
Marina Beach

Marina Beach is a natural urban beach along the Bay of Bengal. The beach is stretched out to a distance of 13 kms making it the longest natural urban beach in the country…

Elliot Beach
Elliot Beach

A beach showcasing beauty, calmness, serenity and everything that signifies nature at its best, the Elliot’s beach cannot be forgotten by anyone who has visited it once…

Guindy National Park
Guindy National Park

Guindy National Park in Chennai is the dominant factor in contributing to the lush green cover of the city. Known to be the 8th smallest national park in the country…

Mahabalipuram
Mahabalipuram

Mahabalipuram, is a town on a strip of land between the Bay of Bengal and the Great Salt Lake, It’s known for its temples and monuments built by the Pallava dynasty in the 7th and 8th centuries…

Kanchipuram
Kanchipuram

Kanchipuram, also known as Kanchi, is an ancient city in southern India’s Tamil Nadu state. Considered a holy pilgrimage site by Hindus, it is home to many temples…

Pondicherry
Pondicherry

Blossoming bougainvilleas, crumbling cathedrals on leafy boulevards and 18th-century colonial buildings colour the former French colony of Pondy, which sits on the Bay of Bengal…

Contact Us

Dr. V. Jayakumar
Convenor, AMMA-2023
Amrita School of Engineering, Chennai, Amrita Vishwa Vidyapeetham 337/1A, Vengal Village, Thiruvallur Taluk & District – 601103 Tamil Nadu, India
Email: meintcon@ch.amrita.edu
Contact No: (+91) 7200207747

Admissions Apply Now