Publication Type : Conference Paper
Publisher : Institute of Electrical and Electronics Engineers Inc.,
Source : Proceedings of the 2017 IEEE International Conference on Communication and Signal Processing, ICCSP 2017, Institute of Electrical and Electronics Engineers Inc., Volume 2018-January, p.1715-1718 (2017)
Url : https://ieeexplore.ieee.org/abstract/document/8286685
ISBN : 9781509038008
Keywords : Amplifiers (electronic), Auto-zeroing, Chopper amplifiers, CMOS (complementary metal oxide semiconductor), CMOS integrated circuits, Continuous time systems, Differential amplifiers, Differential difference amplifier, Field effect transistors, Gain-bandwidth products, Metals, MOS devices, offset, Operational amplifier (op amp), Operational amplifiers, Oxide semiconductors, PSRR (power supply rejection ratio), Signal processing, Silicon on insulator technology, Supply voltages
Campus : Coimbatore
School : School of Engineering
Department : Electronics and Communication
Year : 2017
Abstract : This paper discusses the design of a Continuous Time Auto Zero amplifier (CTAZ) to reduce the offset voltage for sensing very small analog signals. The CTAZ simulation results show that the design is able to achieve an offset of around 2μV for light sensing application, where offset is one of the critical parameters. The designed amplifier has a very high loop gain of 131 dB, a gain bandwidth product of 1.5 MHz, PSRR (Power Supply Rejection Ratio) of 131 dB, and noise floor of 0.2μV/√Hz and consumes 27μW of power. The Operational Amplifier (OP-AMP) was designed in 180nm CMOS process with a supply voltage of 1.8 V. © 2017 IEEE.
Cite this Research Publication : V. Raghuveer, Dr. Karthi Balasubramanian, and Sudhakar, S., “A 2μV low offset, 130 dB High Gain Continuous Auto Zero Operational Amplifier”, in Proceedings of the 2017 IEEE International Conference on Communication and Signal Processing, ICCSP 2017, 2017, vol. 2018-January, pp. 1715-1718.