Publication Type : Journal Article
Thematic Areas : Center for Computational Engineering and Networking (CEN)
Publisher : Expert Systems with Applications
Source : Expert Systems with Applications, Volume 38, Number 4, p.4088-4096 (2011)
Url : http://www.scopus.com/inward/record.url?eid=2-s2.0-78650687670&partnerID=40&md5=becac14af4f94ffeede37b9420945ab6
Keywords : Bearings (structural), Condition monitoring, Fault diagnosis, Feature extraction, Graphic methods, Histogram feature, Learning algorithms, Learning systems, Maintenance, Mathematical operators, Number of features, Problem solving, PSVM, Roller bearings, Statistical features, Statistical methods, SVM, Time domain analysis
Campus : Coimbatore
School : School of Engineering
Center : Computational Engineering and Networking
Department : Mechanical Engineering
Year : 2011
Abstract : Bearings in the machines are the major components of interest for condition monitoring. Their failure causes increase in down time and maintenance cost. A possible solution to the problem is developing an on-line condition monitoring system. The vibration characteristics can be a determining factor that will reveal the condition of the bearing parts. Visual inspection of frequency-domain features of the vibration signals may be sufficient to identify the faults, but it requires large domain knowledge and it is a function of speed. Automatic diagnostic techniques allow relatively unskilled operators to make important decisions. In this context, machine learning algorithms have been successfully used to solve the problem with the help of vibration signals. The machine learning procedure has three important phases: feature extraction, feature selection and feature classification. Feature selection involves identifying the good features that contributes greatly for classification and determining the number of such features. Often researchers overlook the later issue and arbitrarily choose the number of features. As there is no science that will tell the right number of features, for a given problem, an extensive study is needed to find the optimum number of features and this paper presents the results of such a study using SVM and PSVM classifiers for statistical and histogram features of time domain signal. The findings are very interesting and challenging; some useful conclusions were drawn and presented. © 2010 Elsevier Ltd. All rights reserved.
Cite this Research Publication : Va Sugumaran and Dr. K. I. Ramachandran, “Effect of number of features on classification of roller bearing faults using SVM and PSVM”, Expert Systems with Applications, vol. 38, pp. 4088-4096, 2011.