Back close

Impact of Carbon Nanostructures as Additives with Spinel Li4Ti5O12/LiMn2O4 Electrodes for Lithium Ion Battery Technology

Publication Type : Journal Article

Thematic Areas : Nanosciences and Molecular Medicine

Publisher : ChemistrySelect

Source : ChemistrySelect, Volume 2, Number 30, p.9772-9776 (2017)

Url :

Keywords : Carbon additives, Energy storage, Lithium ion battery, lithium manganese oxide, Lithium titanate

Campus : Kochi

School : Center for Nanosciences

Center : Amrita Center for Nanosciences and Molecular Medicine Move, Nanosciences

Department : Nanosciences and Molecular Medicine, Nanosciences

Year : 2017

Abstract : Abstract Spinel structured nanomaterials have shown good stability for lithium ion storage applications. Among all, Li4Ti5O12 (LTO) anode and LiMn2O4 (LMO) cathode is a potential combination for high energy and high power applications. In the present work, we utilize this specific combination to fabricate full-cells in combination with carbon nanostructures as additives. Typically, 20–25 nm sized LTO and 200–500 nm sized LMO nanoparticle electrodes are composited with carbon nanostructures including, carbon nanotube (CNT), carbon black (CB) and graphene nanoplatelets (GNP). High rate performance of respective half-cells (lithium metal as counter electrode) of LTO and LMO are tested up to 50C. It was found that half-cells with CNT additive retained almost 80% of its 1C rate capacity at 50C rate. Also both the electrodes exhibited 1000 cycles stability with retention of about 80% at 10C rate cycling. Using these CNT additive based electrodes, a full-cell fabricated and tested exhibited high capacity and stable cycling over 500 cycles at 1000 mA/g specific current. The full-cell delivered power density of about 2310 W/kg and energy density of about 140 Wh/kg that can be further improved for high power Li-ion battery technology.

Cite this Research Publication : B. Gangaja, Reddy, K. Siva, Nair, S., and Dr. Dhamodaran Santhanagopalan, “Impact of Carbon Nanostructures as Additives with Spinel Li4Ti5O12/LiMn2O4 Electrodes for Lithium Ion Battery Technology”, ChemistrySelect, vol. 2, pp. 9772-9776, 2017.

Admissions Apply Now