Back close

Load Mitigation and Optimal Power Capture for Variable Speed Wind Turbine in Region 2

Publication Type : Journal Article

Publisher : Journal of Renewable Energy

Source : Journal of Renewable Energy (2015)

Url :

Campus : Bengaluru

School : School of Engineering

Department : Electrical and Electronics

Year : 2015

Abstract : This paper proposes the two nonlinear controllers for variable speed wind turbine (VSWT) operating at below rated wind speed. The objective of the controller is to maximize the energy capture from the wind with reduced oscillation on the drive train. The conventional controllers such as aerodynamic torque feedforward (ATF) and indirect speed control (ISC) are adapted initially, which introduce more power loss, and the dynamic aspects of WT are not considered. In order to overcome the above drawbacks, modified nonlinear static state with feedback estimator (MNSSFE) and terminal sliding mode controller (TSMC) based on Modified Newton Raphson (MNR) wind speed estimator are proposed. The proposed controllers are simulated with nonlinear FAST (fatigue, aerodynamics, structures, and turbulence) WT dynamic simulation for different mean wind speeds at below rated wind speed. The frequency analysis of the drive train torque is done by taking the power spectral density (PSD) of low speed shaft torque. From the result, it is found that a trade-off is to be maintained between the transient load on the drive train and maximum power capture.

Cite this Research Publication : R. Saravanakumar and Jena, D., “Load Mitigation and Optimal Power Capture for Variable Speed Wind Turbine in Region 2”, Journal of Renewable Energy, 2015.

Admissions Apply Now