Back close

Superhydrophobic fluorinated POSS-PVDF-HFP nanocomposite coating on glass by electrospinning

Publication Type : Journal Article

Thematic Areas : Nanosciences and Molecular Medicine

Publisher : Journal of Materials Chemistry

Source : Journal of Materials Chemistry, Volume 22, Number 35, p.18479-18485 (2012)

Url :

Keywords : Coatings, Contact angle, Contact angle hysteresis, Electrospinning, Fluorine, Fluorine content, Glass substrates, High solubility, High water, hydrophobicity, Hysteresis, Interfacial energy, Nano-composite coating, Nanocomposites, Nanofibers, Oligomers, Optical properties, Propylene, PVDF-HFP, Sliding angle, Substrates, Super-hydrophobic surfaces, Superhydrophobic, Superhydrophobic coatings, Surface properties, Water contact angle

Campus : Kochi

School : Center for Nanosciences

Center : Nanosciences

Department : Nanosciences and Molecular Medicine

Year : 2012

Abstract : Fluorinated polyhedral oligomeric silsesquioxanes-poly(vinylidene fluoride-co-hexafluoro propylene) (fluoroPOSS-PVDF-HFP) nanocomposite mixtures are prepared by individually mixing two fluorinated POSS materials (FP8 and FPSi8) with PVDF-HFP solution and transparent superhydrophobic coatings on a glass substrate are produced by electrospinning. The fabricated superhydrophobic surface exhibits continuous, uniform and non-beaded nanofibers with a high water contact angle (157.3°) and a low sliding angle (SA lt; 5°). The superhydrophobic properties including surface energy, water contact angle, and contact angle hysteresis as well as the optical properties are studied by altering the wt% of fluoroPOSS in PVDF-HFP solution. It is observed that due to the increase in the viscosity of the solution, the diameter of the nanofibers increases with increase in the concentration of fluoroPOSS. It is also observed that as the concentration of fluoroPOSS in PVDF solution increases, the amount of fluorine content increases thereby the surface energy of the coating decreases (to around 10 mN m -1) leading to a superhydrophobic surface with low contact angle hysteresis (lt;5°). The optical properties of the coatings produced using FPSi8 fluoroPOSS-PVDF-HFP mixture are compared with those of FP8 fluoroPOSS, and the former is found to be more transparent due to its relatively high solubility in PVDF-HFP. © 2012 The Royal Society of Chemistry.

Cite this Research Publication : V. A. Ganesh, A. S. Nair, Raut, H. K., Tan, T. T. Yuan, He, C., Ramakrishna, S., and Xu, J., “Superhydrophobic fluorinated POSS-PVDF-HFP nanocomposite coating on glass by electrospinning”, Journal of Materials Chemistry, vol. 22, pp. 18479-18485, 2012.

Admissions Apply Now