The project titled Implementation of Intensive Natural Language Processing & Soft Computing Technology Based Extrinsic Plagiarism Detection Tool is funded by Department of Science & Technology (DST) Fast Track Young Scientist-Engineering Science Scheme.
Research Projects @ Amrita University
-
implementation-of-intensive-natural-language-processing-amp-soft-computing-technology-based-extrinsic-plagiarism-detection-tool -
The project titled Investigation into the surface integrity of the Titanium Alloys during high speed machining, is funded by ARDB. The investigators of the project are Dr. K. I. Ramachandran, Mr. P. Krishnakumar, Mr. A.Sumesh and Dr. M. Saimurugan.
investigation-into-the-surface-integrity-of-the-titanium-alloys-during-high-speed-machining -
COTS Security Incident and Event Management (SIEM) Systems process log events based on built-in rules and identify actionable incidents. These primarily identify known attacks. Using Machine Learning techniques such as Naive Bayes and AdaBoost algorithms, we aim to predict new attacks probabilistically for wired and wireless networks. The Machine Learning-based prediction system in tandem with an SIEM system to predict an attack before it actually occurs. Evaluate the effectiveness of the ML system comparing with the SIEM system in network attack prediction
predictive-threat-evaluation-in-complex-it-systems -
Elastomeric components used in various nuclear applications have to withstand aggressive environments such as chemicals, corrosion and radiation.
ethylene-propylene-diene-monomer-epdm-rubber-based-nanocomposites-for-application-in-corrosive-and-radiation-environments -
Over the recent years, video camera networks have become ubiquitous and a part of our everyday environments. Such camera networks are deployed in a wide gamut of applications ranging from surveillance, emergency response, disaster recovery, and health care monitoring to name a few.
video-analytics-based-identification-and-tracking-in-smart-spaces -
The project titled, "Study of Heat Transfer Characteristics of Nanofluids as Coolants for Automotive Application," is funded by DST - (Nano Mission). The investigators of the project are Dr. S. Thirumalini, M. Vivek and D. Senthil Kumar.
study-of-heat-transfer-characteristics-of-nanofluids-as-coolants-for-automotive-application -
Different types of polymer composites are used in launch vehicles and satellite systems. The polymer matrices include polyurethanes, silicones, epoxies, PEEK, phenolics, acrylonitrile – butadiene copolymer [NBR], polyisoprene [NR] etc. Fillers which provide reinforcement, or specific properties may be particulate [eg silica, carbon black, silicon carbide] or fibrous / fabric, continuous or discrete [eg fibre/fabric of carbon, silica fabric, Kevlar, glass etc].
particulate-polymer-composites-for-space-applications-modeling-and-simulation-of-physical-mechanical-and-rheological-properties -
Aerobic treatment of waste water requires the continuous replenishment of oxygen economically in sufficient quantities. Efficient aerators are developed towards this end. Plunging Hollow Jet Aerators consist of a cone, which deflects the water at the end of a discharging pipe through the annular opening, forming a hollow jet.
development-and-scale-up-of-plunging-hollow-jet-venturi-and-sudden-expansion-type-aerators -
The project titled "Indigenous development of functionally-graded aluminium metal matrix composites using centrifugal casting method and to investigate the mechanical and tribological properties", is funded by DST. The investigators of the project are Dr. Radhika S., Dr. Ilangovan S.
indigenous-development-of-functionally-graded-aluminium-metal-matrix-composites-using-centrifugal-casting-method-and-to-investigate-the-mechanical-and-tribological-properties -
The project titled Design, synthesis and characterization of modified peptide nucleic acids having electrochemical/fluorescent markers, is funded by DST-SERB. The investigator is Dr. Prasanna Ramani.
design-synthesis-and-characterization-of-modified-peptide-nucleic-acids-having-electrochemical-fluorescent-markers -
Amaran- A Robotic Coconut tree Climber- India got the tag as the second largest coconut producer in the world. Until recently coconut plucking job conventionally was taken up by socially and economically backward people in these areas. Due to various government welfare programs and increase in literacy, the number of people taking up this job has dwindled a lot which is one of the main reasons resulting in increase in the price of coconuts.
amaran-a-robotic-coconut-tree-climber -
The project titled Total Synthesis of modified Berberines – A preliminary anti-cancer study, is funded by Heurtey Petrochemical Pvt. Ltd. The investigator is Dr. Prasanna Ramani.
total-synthesis-of-modified-berberines-a-preliminary-anti-cancer-study -
KaraChara is used in the rehabilitation and therapy of patients with paralysis due to stroke or spinal cord injury. The design consists of dual control mechanisms for the efficient operation of a Hand Orthosis device, which includes Electrooculogram (EOG) based control and Graphical User Interface (GUI) based control. Physiotherapists can train the patients at initial stages and patients themselves can start using without the need for Physiotherapists later. A patent has been filed for the same and is expected by the end of this year.
karachara-hand-orthosis-for-rehabilitation-of-stroke-patients -
The project titled Synthesis of intermediates for biologically active molecules, is funded by Aventis Pharmaceuticals Pvt. Ltd. The investigator is Dr. Prasanna Ramani. The project
synthesis-of-intermediates-for-biologically-active-molecules -
Neural Network Modeling for Condition Monitoring of I. C. Engine using different composite flywheelsThe project titled "Neural Network Modeling for Condition Monitoring of I.C.Engine using different composite flywheels" is funded by IEI.
neural-network-modeling-for-condition-monitoring-of-i-c-engine-using-different-composite-flywheels -
The goal of this project is to create a hierarchical extendible data model for indoor information which can represent buildings, entities within it, utilities, objects inside the building, and sensors inside the building for object tracking and localization, so that the represented data is easily stored and queried using a spatio-temporal database. An indoor information system will be developed which can support indoor asset tracking and real-time navigation over this data model. This project is funded by DST, India.
indoor-gis -
The project titled “Indoor Information Representation and Management System” is funded by Department of Science and Technology, India. Dr. Vidhya Balasubramanian, Associate Professor, Department of Computer Science Engineering, Amrita School of Engineering, Coimbatore, is the Principal Investigator.
indoor-information-representation-and-management-system -
The project titled "Development of Spinodal bronze, Bronze Matrix Composite and Functionally Gradient Bronze and Comparison of their Mechanical and Wear Properties", is funded by DRDO.
development-of-spinodal-bronze-bronze-matrix-composite-and-functionally-gradient-bronze-and-comparison-of-their-mechanical-and-wear-properties -
The project titled Fault diagnosis of dynamic mechanical systems (gearbox) based on signal processing using machine learning techniques, is funded by DRDO. The investigators of the project are Dr. K. I. Ramachandran, Dr. M. Saimurugan, Dr. K. Rameshkumar and Mr. P. Krishnakumar.
fault-diagnosis-of-dynamic-mechanical-systems-gearbox-based-on-signal-processing-using-machine-learning-techniques- -
This project is to create an impact on the level of independence of people with disabilities. To ease the lives of those among us who are unfortunate enough to have lost the ability to move their limbs due to stroke, (SCI - Spinal Cord Injury), old age and other disabilities (SSEP Group), Mudra is the perfect solution. Conventional control mechanism, joy stick, is not suitable for SSEP group of people as the joy stick requires the user to hold it and exert some force.
mudra-hand-gesture-based-wheelchair-navigation -
The receptor sites of the GABAA, GABAB and GHB receptors have been identified and the interactional analysis have been carried out using GABA and GHB molecules. The rate of interaction, mode of interaction the site of interaction and the way of interaction have been identified.
modeling-the-effects-of-decreased-level-of-gaba-and-accumulation-of-ghb-on-gaba-receptors-and-its-effect-on-pediatric-neonatal-seizures -
The project titled "Process Monitoring & Control of Ultra Precision Machining of Ti6 Al4 V Alloys" is funded by DRDO.
process-monitoring-amp-control-of-ultra-precision-machining-of-ti6-al4-v-alloys -
This project is ongoing as part of the Amrita E-Learning Research Center. The goal of this project is to develop solutions for content based search and retrieval of multimedia E-Learning material.
indexing-and-searching-e-learning-content -
Wordnet is an online lexical reference system. Its design is inspired by current psycholinguistic and computational theories of human lexical memory. Nouns, verbs, adjectives and adverbs are organized into synonymous sets, each representing one underlying lexicalized concept. Different semantic relations link the synonymous sets. Wordnet is neither a traditional dictionary nor a thesaurus but combines features of both types of lexical reference resources.
development-of-source-code-methodologies-plagiarism-detection-engine -
Dispersion of nanocarbon forms and metal nanoparticles in a conducting polymer matrix facilitates coating of such materials. Different nanocarbon materials such as single walled carbon nanotube (SWCNT), double walled carbon nanotube (DWCNT), multi walled carbon nanotube (MWCNT), and graphene are being synthesized using Radio Frequency (RF) Catalytic Chemical Vapor Deposition (CCVD).
novel-nanocomposites-with-unusually-high-conductivity-for-microwave-absorption-development-of-carbon-intrinsically-conducting-polymer-c-icp-and-c-icp-metal-nanocomposites -
The objective of the work was to develop aluminum alloys containing lithium, copper, and zirconium for aerospace applications. Moderately thick deposits of binary and ternary alloys of aluminum with lithium, copper and zirconium were successfully electrodeposited. This was achieved at room temperature through the use of low cost ionic liquid containing AlCl3 and triethylammine hydrochloride (Et3NHCl).
electrodeposition-of-aluminium-lithium-alloys-for-cryo-and-space-applications -
The stability theory of stream ciphers suggests that good key stream sequences must not only have a large linear complexity, but also change of a few terms must not cause a significant drop of the Linear complexity. This unfavorable property leads to the concept of k-error linear complexity. In this project we propose to extend this to the case of multisequences.
error-linear-complexity-measures-for-multisequences -
Preliminary studies have been carried out using flexible laminates prepared from different types of PET films and UHMWPE (Dyneema) fabric using polyurethane based adhesive. Peel strength, Lap shear strength and helium leak rate of the samples were studied. The effect of plasma treatment of Dyneema fabric on the adhesion properties was analyzed. Discussions held with ISRO scientists provided focus to the subsequent studies.
polymer-nanocomposites-for-inflatable-space-structures -
This testing facility is created to modernize the Heat Engines laboratory with funding from AICTE in the MODROB scheme with the equipments indicating Package, Crank angle encoder, and Combustion Analyser Eddy current Dynamometer.
online-testing-of-ic-engines -
This research project identifies an appropriate combination of metal-elastomeric module configuration, using multi-layer shear damped viscoelastic approach, for mitigating the structure-bound vibrations on to the sensitive equipment. The composites are made of a metal (aluminium), and an elastomer (natural rubber and silicone rubber).
analysis-and-evaluation-of-multilayer-shear-damped-viscoelastic-treatments-for-launch-vehicle-applications -
The funded amount received from AICTE under Research Promotion Scheme (RPS) will be utilized to create facility with a vision system and a tri-axial manipulator in the Welding Research Lab. Research in the area of controlling the welding process with a feed-back of weld pool geometry has been of interest lately as a way to improve the quality and the consistency.
development-of-a-real-time-process-control-method-based-on-neural-network-model-using-feedback-of-weld-pool-geometric-parameters-measured-by-a-vision-based-technique-and-experimental-verification-for-automated-arc-welding-processes -
In this project we are attempting to address various VLSI design related issues with a special focus on low area and low power implementation of the finite filed arithmetic. We intend to select a few algorithms with the potential for application in the area. Their realization with FGPA will be studied, analyzed and compared. The focus will be on the identification of algorithms and parameter combinations which will deliver optimum performance.
vlsi-development-of-finite-field-arithmetic -
This is concerned with development of video summarization techniques like Non negative matrix factorization, singular value decomposition etc.
video-summarization-and-annotation-for-content-based-retrieval -
Induction motors at light load run at low power factor and low efficiency. But if the stator supply voltage is reduced at light load condition, both the efficiency and power factor can be improved owing to reduction in magnetizing current and core loss. The proposed energy saver is a thyristorized phase control working in feed back mode.
development-of-energy-saver-for-induction-motors -
All the state of the art methods of image fusion techniques were compiled and implemented as easy to use software.
development-of-image-fusion-techniques-and-measurement-methods-to-assess-quality-of-fusion -
The funded amount received from AICTE under MODROB scheme has been utilized to modernize the Metallurgy Laboratory with the following equipments:
modernization-of-metallurgy-laboratory-for-mechanical-testing-metal-forming-and-quantitative-metallurgical-microstructure-analysis -
The project envisages development of novel polymers based on cardanol, a constituent of a natural product, viz.cashewnut shell liquid. Polyamides using diamine have been synthesized and characterized.
development-of-high-performance-polyamides-from-renewable-natural-source-cardanol- -
A Cryptographically Secure Power Generators (CSPRNG) is a power generator with properties that makes it suitable for use in cryptography. CSPRNGs are designed explicitly to resist determined mathematical reverse engineering. In this project, we are studying the designs of power generators based on number theory. We concentrate in fast generation of the following generators: Power generators such as BBS generators.
design-and-analysis-of-cryptographically-secure-power-generators -
The project titled Design of Low Weight Shaped Beam Reflector Antenna with Integral IFF and SLB Antenna is handled by the Center for Computational Engineering and Networking. The Principal Investigator of the project are Prof. A. N. Shivaram and Prof. C. G. S. Sarma.
design-of-low-weight-shaped-beam-reflector-antenna-with-integral-iff-and-slb-antenna -
The funded amount received as a grant from GOI was utilized in establishing a state - of - ;the art welding research laboratory at Ettimadai campus comprising of the following equipments Lincoln ElectricTIG Welding Machine, Lincoln Electric MIG Welding Machine, StellarNet UV Radio-spectrometer and Linear Manipulator.
method-to-control-ultraviolet-radiation-in-welding-processes -
The objectives of the projects is to develop a system that extracts objects and motion information, uses an extensible object-relational system for organizing multimedia and incorporates novel query-processing techniques for similarity queries.
digital-multimedia -
Indo-Italian Project: Amrita University along with the University of Milan aims to develop and investigate the dynamics of brain models that are capable of predicting the cerebellar input-output transformations. It also hopes to analyze the mathematical and computational properties of the robotic network.
autonomous-mobile-robots-based-on-bioinspired-artificial-control-indo-italian-initiative -
The project titled "Development of a method to Control Ultraviolet Radiation in welding Processes" is funded by DRDO. The investigators of the project are Dr. R. Sellamuthu, Dr. Sanjivi Arul, Dr. S. Ilangovan and R. Saravanan.
development-of-a-method-to-control-ultraviolet-radiation-in-welding-processes -
Objective of this project is to develop Data acquisition system from distributed sensors with capabilities for 16-to-24-bit enhancement, local storage, and local visualization and the Secure transmission of acquired data reliably to multiple data centres across India over VSAT and Internet. Data centres also have the data visualization, archival, and data format conversion capabilities.
secured-data-acquisition-and-transmission-system-for-data-center-sdats- -
The project titled "Modernisation of Dynamics Laboratory for realtime vibration analysis (MODROB)" is funded by AICTE. The Principal Investigator of the project is Dr. Joshi C. Haran.
modernisation-of-dynamics-laboratory-for-realtime-vibration-analysis-modrob- -
In the current global scenario, the prime question in every woman’s mind is about her safety and security. An undeniable reality that has not changed and is still prevailing,not only in our country but all around the world,is the safety of women.
iot-based-women-security-system -
The project titled “Smart water management" is submitted to DeitY. Dr. P. Bagavathi Sivakumar, Dr. Latha Parameswaran, Mr. V. Ananthanarayanan, Mr.Prashant Nair are the investigators. The duration of the project is 3 years.
smart-water-management -
Paripreksya 3.0 is a tele-operated UGV (Unmanned Ground Vehicle) developed at HuT Labs.It is a light weight robot capable of doing complex maneuvering, mobility and dexterity tasks. The robot typically consists of a mobile base and a manipulator.
paripreksya-3-0 -
Drug repurposing refers to finding alternate indications to approved drugs, leads in regular development cycles, or even compounds previously discontinued from development. This collaborative project between Amrita University (Bengaluru Campus) and Jawaharlal Nehru University (New Delhi) aims to develop web‐based UI landscapes to provide a data‐centric deep mining technique that lets researchers formulate sophisticated drug repositioning hypotheses.
drug-repurposing-workbench -
The project titled "Structured Dialogues for Sustainable Urban Water Management (CoPI)," is funded by DST: WTI-Urban Water Systems.
structured-dialogues-for-sustainable-urban-water-management-copi-
Pages
207
PROGRAMS
OFFERED
OFFERED
6
AMRITA
CAMPUSES
CAMPUSES
15
CONSTITUENT
SCHOOLS
SCHOOLS
A
GRADE BY
NAAC, MHRD
NAAC, MHRD
4th
RANK(INDIA):
NIRF 2020
NIRF 2020
150+
INTERNATIONAL
PARTNERS
PARTNERS
Amrita on Social Media
Contact us
Amrita Vishwa Vidyapeetham,
Amritanagar,
Coimbatore - 641 112,
Tamil Nadu, India.
Amritanagar,
Coimbatore - 641 112,
Tamil Nadu, India.
- Fax : +91 (422) 268 6274
- Coimbatore : +91 (422) 268 5000
- Amritapuri : +91 (476) 280 1280
- Bengaluru : +91 (080) 251 83700
- Kochi : +91 (484) 280 1234
- Mysuru : +91 (821) 234 3479
- Chennai : +91 (44 ) 276 02165
- Contact Details »