Back close
Mr-Ulhas-K-annigeri_faculty_amrita_university_Bengaluru_campus.jpg

Dr. Ulhas K Annigeri

Asst. Professor (Sr. Gr), Mechanical Engineering, School of Engineering, Bengaluru

Qualification: BE, M.Tech, Ph.D
uk_annigeri@blr.amrita.edu
Research Interest: Composite Materials, Tool Engineering

Bio

Ulhas Krishnarao Annigeri is working as Assistant Professor (Sr.Gr.) in the department of Mechanical Engineering at Amrita School of Engineering, Bengaluru Campus. He has a prior experience in Design of Press Tools, Industrial Training and Process Planning at different industries. He was involved in the development of stage tools for automobile parts.
He has experience of 18 years in teaching, research, and industry.

Qualification

YEAR DEGREE UNIVERSITY
2021 Ph. D. Amrita VishwaVidyapeetham
2005 M. Tech.(Tool Engineering) Vishveshwariah Technological University
2001 B. E.(Mechanical) Karnataka University
Publications

Journal Article

Year : 2021

Comparative study of synthesis of Al6061-B4C metal matrix composites – A Review

Cite this Research Publication : G. B. Veeresh Kumar, A. Ulhas Krishna Rao, and T. Srinivas Rao, “Comparative study of synthesis of Al6061-B4C metal matrix composites - A Review”, Natural volatiles and essential oils, Volume 8, Issue 3, e-ISSN: 2148-9637, 2021, December

Year : 2020

Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites

Cite this Research Publication : G. B. Veeresh Kumar, A. Ulhas Krishna Rao, and T. Srinivas Rao, “Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si3N4 Composites,” Materials Performance and Characterization 9, No. 1 (2020): 591–604. https://doi.org/10.1520/MPC20200037

Year : 2019

Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites

Cite this Research Publication : U. K. Annigeri and G. B. Veeresh Kumar, “Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites,” Journal of Testing and Evaluation 47, no. 6: 4465–4477. https://doi.org/10.1520/JTE20180138, 2019

Year : 2019

Manufacturing Feasibility of Al6061and Boron Carbide Particulate Reinforcement to Cast a Metal Matrix Composite with Wettability Agent

Cite this Research Publication : Ulhas K. Annigeri, ,, and Dr. T. Srinivas Rao, “Manufacturing Feasibility of Al6061and Boron Carbide Particulate Reinforcement to Cast a Metal Matrix Composite with Wettability Agent”, International Journal of Innovative Technology and Exploring Engineering, 2019.

Publisher : International Journal of Innovative Technology and Exploring Engineering

Year : 2016

Effect of turning parameters on A16351 T6 by using Design of Experiments

Cite this Research Publication : Ulhas K. Annigeri, Charan, M., M Sai, V., T Charan, R., and L Sai, R., “Effect of turning parameters on A16351 T6 by using Design of Experiments”, IOP Conference Series: Materials Science and Engineering, vol. 149, p. 012117, 2016.

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012117

Year : 2014

Design, Development & Analysis of Forming Tool for side panel of an Automobile

Cite this Research Publication : K. Annigeri Ulhas, Y. P. Deepthi, and Raghavendra, R. Kiran, “Design, Development & Analysis of Forming Tool for side panel of an Automobile”, International Journal of Mechanical and Production Engineering, vol. 2, no. 6, 2014.

Publisher : International Journal of Mechanical and Production Engineering

Conference Paper

Year : 2022

Physical, Mechanical, and Fracture Studies of Al6061-B4C MMCs

Cite this Research Publication : lhas K. Annigeri and G. B. Veeresh Kumar, Physical, Mechanical, and Fracture Studies of Al6061-B4C MMCs, AIP Conference Proceedings 2446, 040010 (2022); https://doi.org/10.1063/5.0109267

Year : 2020

Sequel of B4C reinforcement treatment in Al6061 on fatigue, damping, chip formation behaviour and shock wave interaction – A proposition

Cite this Research Publication : Ulhas K. Annigeri, T Srinivas Rao,” Sequel of B4C reinforcement treatment in Al6061 on fatigue, damping, chip formation behaviour and shock wave interaction – A proposition” Icon AMMA, Materials Today Proceedings, 2020.

Year : 2018

Effect of reinforcement on density, Hardness and wear behaviour of aluminium metal matrix composites: A Review

Cite this Research Publication : lhas K. Annigeri, Veeresh Kumar G B “Effect of reinforcement on density, Hardness and wear behaviour of aluminium metal matrix composites: A Review”, Materials Today Proceedings, Volume 5, Issue 5, Part 2, 11233-11237, https://doi.org/10.1016/j.matpr.2018.02.002, 2018.

Year : 2018

Influence of turning treatments on Al6061 by offline inspection technique

Cite this Research Publication : Ulhas K Annigeri, K L G Sandeep, M Prasanna Chaitanya, G Sairam Varma1 and B Arun Datta, Influence of turning treatments on Al6061 by offline inspection technique, IOP conference series, Material science and engineering, https://doi:10.1088/1757-899X/310/1/012079, 2018.

Year : 2018

Influence of turning Treatments on Al6061 by Offline Inspection Technique

Cite this Research Publication : Ulhas K Annigeri, K L G Sandeep, M Prasanna Chaitanya, G Sairam Varma1 and B Arun Datta, Influence of turning treatments on Al6061 by offline inspection technique, IOP conference series, Material science and engineering, https://doi:10.1088/1757-899X/310/1/012079, 2018.

Publisher : IOP Conference Series: Materials Science and Engineering

Year : 2017

Method of stir casting of Aluminium metal matrix composites: A Review

Cite this Research Publication : lhas K. Annigeri, Veeresh Kumar G B “Method of stir casting of Aluminium metal matrix composites: A Review”, Materials Today Proceedings, Volume 4, Issue 2, Part A, 1140-1146, https://doi.org/10.1016/j.matpr.2017.01.130, 2017.

Year : 2017

Method of stir casting of Aluminum metal matrix Composites: A review

Cite this Research Publication : Ulhas K. Annigeri, “Method of stir casting of Aluminum metal matrix Composites: A review”, Materials Today: Proceedings, vol. 4, pp. 1140-1146, 2017.

Publisher : Materials Today: Proceedings

Year : 2014

Development of Stage tools for Side Panel of an automobile

Publisher : International Conference of Mechanical Engineering

Year : 2014

Design, Development and Analysis of Forming tool for side panel of an automobile

Cite this Research Publication : K. Annigeri Ulhas, Y. P. Deepthi, and Raghavendra Ravikiran K., “Design, Development and Analysis of Forming tool for side panel of an automobile”, in International Conference on Computer Science and Mechanical Engineering, organized by ICCSME Pondicherry, 2014.

Publisher : International Conference on Computer science and Mechanical Engineering

Conference Proceedings

Year : 2020

Sequel of B4C reinforcement treatment in Al6061 on fatigue, damping, chip formation behaviour and shock wave interaction – A proposition

Cite this Research Publication : Ulhas K. Annigeri, T Srinivas Rao,” Sequel of B4C reinforcement treatment in Al6061 on fatigue, damping, chip formation behaviour and shock wave interaction – A proposition” Icon AMMA, Materials Today Proceedings, 2020.

Year : 2017

Design and development of progressive tool for manufacturing washer

Cite this Research Publication : Ulhas K. Annigeri, Raghavendra Ravikiran K., and Y. P. Deepthi, “Design and development of progressive tool for manufacturing washer”, AIP Conference Proceedings, vol. 1859. American Institute of Physics Inc., 2017.

Publisher : AIP Conference Proceedings, American Institute of Physics Inc.,

Admissions Apply Now