Back close
Admissions

Dr. Madhulika Srivastava

Assistant Professor, Department of Mechanical Engineering, School of Engineering, Chennai

Qualification: B-Tech, M.Tech, Ph.D
s_madhulika@ch.amrita.edu
Orchid ID
Google Scholar Profile
Scopus Author ID
Research Interest: Additive Manufacturing, Friction surfacing, Material Characterization, Mechanical Properties, Residual Stresses and Characterization, Surface Profiles, Water jet peening

Bio Publications Education Experience Awards and Recognition Technical Skills Courses Taught Technical Society Membership Workshops and Training Programs Attended
Bio

Madhulika Srivastava currently serves as Assistant Professor in the Department of Mechanical Engineering, School of Engineering, Amrita Vishwa Vidyapeetham, Chennai Campus.

Madhulika Srivastava, a Ph.D. Scholar in the Mechanical Engineering Department at Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand, has submitted her thesis and is waiting to defend the same. Her research focussed on “Peening of Austenitic Stainless Steel Surfaces Using Ultrasonic Pulsating Water Jet Technology”. She also received her Master’s in Mechanical Engineering with specialization in Manufacturing from the Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand and carried out her master’s thesis on the topic, “Friction Surfacing of Ferrous and Non-ferrous Alloys”. Before joining her Master’s, she was CSIR-NET JRF and GATE qualified.

Madhulika Srivastava carried out her research under the collaboration of the Institute of Geonics, Ostrava (Czech Academy of Sciences), Czech Republic, and the Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand. She also received the ERASMUS+ Scholarship from the Technical University of Kosice, Slovakia, during her Ph.D. Her published work deals with the areas of water jet technology, peening and friction surfacing. Till date, she has published 9 papers (3 as first author, 1 as corresponding author and 5 as co-author) indexed in SCIE/Web of Science Journals, with good impact factors. Additionally, she has published 8 Scopus-indexed Conference papers (3 as first author and 5 as co-author). She has also received Awards for Best Paper (Gold and Bronze) in International Conferences.

Publications

Journal Article

Year : 2021

STANDOFF DISTANCE IN ULTRASONIC PULSATING WATER JET.

Cite this Research Publication : Madhulika Srivastava, Akash Nag, Somnath Chattopadhyaya, Sergej Hloch. STANDOFF DISTANCE IN ULTRASONIC PULSATING WATER JET. Materials (2021).doi:

Publisher : Materials

Year : 2021

EFFECT OF PERIODIC WATER CLUSTERS IMPACT ON AISI 304 WELDED SURFACES

Cite this Research Publication : Madhulika Srivastava, Akash Nag, Somnath Chattopadhyaya, Sergej Hloch. EFFECT OF PERIODIC WATER CLUSTERS IMPACT ON AISI 304 WELDED SURFACES. Materials (2021)

Publisher : Materials

Year : 2021

UTILIZING THE WATER HAMMER EFFECT TO ENHANCE THE MECHANICAL PROPERTIES OF AISI 304 WELDED JOINTS.

Cite this Research Publication : Srivastava, M., Hloch, S., Krejci, L. et al. Utilizing the water hammer effect to enhance the mechanical properties of AISI 304 welded joints. Int J Adv Manuf Technol 119, 2317–2328

Publisher : The International Journal of Advanced Manufacturing Technology

Year : 2020

EFFECT OF PRESSURE OF PULSATING WATER JET MOVING ALONG STAIR TRAJECTORY ON EROSION DEPTH, SURFACE MORPHOLOGY AND MICROHARDNESS

Cite this Research Publication : Sergej Hloch, Madhulika Srivastava, Akash Nag, Miroslav Muller, Monika Hromasová, Jaroslava Svobodová, Tomáš Kruml, Alice Chlupová. EFFECT OF PRESSURE OF PULSATING WATER JET MOVING ALONG STAIR TRAJECTORY ON EROSION DEPTH, SURFACE MORPHOLOGY AND MICROHARDNESS. Wear (2020)

Publisher : Elsevier B.V.

Year : 2019

INVESTIGATION OF SANDSTONE EROSION BY CONTINUOUS AND PULSED WATER JETS

Publisher : Journal of Manufacturing Processes

Year : 2019

HYDRODYNAMIC DUCTILE EROSION OF ALUMINIUM BY A PULSED WATER JET MOVING IN AN INCLINED TRAJECTORY.

Cite this Research Publication : Sergej Hloch, Pavel Adamčík, Akash Nag, Madhulika Srivastava, Dominic Čuha, Miroslav Müller, Monika Hromasová, Jiri Klich, HYDRODYNAMIC DUCTILE EROSION OF ALUMINIUM BY A PULSED WATER JET MOVING IN AN INCLINED TRAJECTORY. Wear (2019).

Publisher : Wear

Year : 2019

NVESTIGATION OF SANDSTONE EROSION BY CONTINUOUS AND PULSED WATER JETS

Cite this Research Publication : Piush Raj, Sergej Hloch, Rupam Tripathi, Madhulika Srivastava*, Dagmar Klichová, Jirí Klich, Monika Hromasová, Miroslav Müller, Linda Miloslav, Somnath Chattopadhyaya, Pavel Adamčík. INVESTIGATION OF SANDSTONE EROSION BY CONTINUOUS AND PULSED WATER JETS, Journal of Manufacturing Processes (2019).

Publisher : Journal of Manufacturing Processes

Year : 2019

SURFACE INTEGRITY AND RESIDUAL STRESS ANALYSIS OF PULSED WATER JET PEENED STAINLESS STEEL SURFACES.

Cite this Research Publication : Madhulika Srivastava, Sergej Hloch, Nenad Gubeljak, Marijana Milkovic, Somnath Chattopadhyaya, Jiri Klich. SURFACE INTEGRITY AND RESIDUAL STRESS ANALYSIS OF PULSED WATER JET PEENED STAINLESS STEEL SURFACES. Measurement (2019)

Publisher : Measurement

Year : 2018

ULTRASONICALLY GENERATED PULSED WATER JET PEENING OF AUSTENITIC STAINLESS-STEEL SURFACES

Cite this Research Publication : Madhulika Srivastava, Sergej Hloch, Rupam Tripathi, Drazan Kozak, Somnath Chattopadhyaya, Amit Rai Dixit, Josef Foldyna, Pavol Hvizdos, Martin Fides, Pavel Adamcik. ULTRASONICALLY GENERATED PULSED WATER JET PEENING OF AUSTENITIC STAINLESS-STEEL SURFACES. Journal of Manufacturing Process(2018)

Publisher : Journal of Manufacturing Process

Year : 2018

OPTIMIZATION AND CHARACTERIZATION OF FRICTION SURFACED COATINGS OF FERROUS ALLOYS

Cite this Research Publication : Mohammed Shariq, Madhulika Srivastava, Rupam Tripathi, Somnath Chattopadhyaya, Pedro Vilaca, Nenad Gubeljak, Grzegorz Krolczyk. OPTIMIZATION AND CHARACTERIZATION OF FRICTION SURFACED COATINGS OF FERROUS ALLOYS. Material Testing (2018).

Publisher : Material Testing

Year : 2018

STRENGTHENING EFFECT AFTER DISINTEGRATION OF STAINLESS STEEL USING PULSATING WATER JET.

Cite this Research Publication : Sergej Hloch, Madhulika Srivastava, Grzegorz Krolczyk, Somnath Chattopadhyaya, Dominika Lehocká, Vladimír Simkulet. STRENGTHENING EFFECT AFTER DISINTEGRATION OF STAINLESS STEEL USING PULSATING WATER JET. Tehnički vjesnik/Technical Gazette (2018)

Publisher : Technical Gazette

Year : 2018

RESIDUAL STRESS AND SURFACE PROPERTIES OF STAINLESS STEEL WELDED JOINTS INDUCED BY ULTRASONIC PULSED WATER JET PEENING

Cite this Research Publication : Madhulika Srivastava, Sergej Hloch, Lucie Krejci, Somnath Chattopadhyaya, Amit Rai Dixit, Josef Foldyna. RESIDUAL STRESS AND SURFACE PROPERTIES OF STAINLESS STEEL WELDED JOINTS INDUCED BY ULTRASONIC PULSED WATER JET PEENING. Measurement, (2018).

Publisher : Measurement,

Year : 2017

CHARACTERIZATION OF FRICTION SURFACED COATINGS OF AISI 316 TOOL OVER HIGH-SPEED-STEEL SUBSTRATE

Cite this Research Publication : Ravi Kumar, Somnath Chattopadhyaya, Aniruddha Ghosh, Grzegorz M. Krolczyk, Pedro Vilaca, Ratnesh Kumar, Madhulika Srivastava, Mohammad Shariq, Rupam Tripathi. CHARACTERIZATION OF FRICTION SURFACED COATINGS OF AISI 316 TOOL OVER HIGH-SPEED-STEEL SUBSTRATE; Transactions of FAMENA (Faculty of Mechanical Engineering and Naval Architecture) (2017)

Publisher : Transactions of FAMENA

Year : 2013

Fourier sine and cosine transforms on Boehmian spaces

Cite this Research Publication : Ra Roopkumar, Negrin, E. Rb, Ganesan, Cc, and Srivastava, H. Md, “Fourier sine and cosine transforms on Boehmian spaces”, Asian-European Journal of Mathematics, vol. 6, 2013.

Publisher : Asian-European Journal of Mathematics

Conference Paper

Year : 2014

THERMAL ANALYSIS AND MICROSTRUCTURE CHANGES DURING FRICTION STIR SURFACING OF VARIOUS FERROUS AND NON FERROUS ALLOY

Cite this Research Publication : 1. Mohammed Shariq, Madhulika Srivastava, Rupam Tripathi, Somnath Chattopadhyaya, Pedro Vilaca. THERMAL ANALYSIS AND MICROSTRUCTURE CHANGES DURING FRICTION STIR SURFACING OF VARIOUS FERROUS AND NON FERROUS ALLOYS. National Conference on Advances in Thermal Engineering, 19-20 December 2014, ISM Dhanbad, India, 258-264.

Publisher : National Conference on Advances in Thermal Engineerin

Conference Proceedings

Year : 2019

EFFECT OF DIFFERENT PARAMETERS ON SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN ABRASIVE WATER JET CUTTING OF NIMONIC C263

Cite this Research Publication : Arghya Bagchi, Madhulika Srivastava, Rupam Tripathi, Somnath Chattopadhyaya. EFFECT OF DIFFERENT PARAMETERS ON SURFACE ROUGHNESS AND MATERIAL REMOVAL RATE IN ABRASIVE WATER JET CUTTING OF NIMONIC C263. Materials Today Proceedings (2019).

Publisher : Materials Today Proceedings

Year : 2018

SURFACE TREATMENT OF AISI 304 USING PULSATING WATER JET PEENING.

Cite this Research Publication : Madhulika Srivastava, Rupam Tripathi, Sergej Hloch, Ayush Rajput, Drupad Khublani, Somnath Chattopadhyaya. SURFACE TREATMENT OF AISI 304 USING PULSATING WATER JET PEENING. International Conference on Application of fluid Dynamics, December 19-21, 2016 IIT(ISM) Dhanbad. Lecture notes of Mechanical Engineering- Application of Fluid Dynamics. (2018)

Publisher : Application of Fluid Dynamics.

Year : 2018

PERFORMANCE ANALYSIS OF PULSATING WATER JET MACHINING DURING DISINTEGRATION OF ROCKS BY MEANS OF ACOUSTIC EMISSION

Cite this Research Publication : Rupam Tripathi, Madhulika Srivastava, Sergej Hloch, Somnath Chattopadhyaya, Alok Kumar Das, Alokesh Pramanik. PERFORMANCE ANALYSIS OF PULSATING WATER JET MACHINING DURING DISINTEGRATION OF ROCKS BY MEANS OF ACOUSTIC EMISSION. International Conference on Application of fluid Dynamics, December 19-21, 2016 IIT(ISM) Dhanbad. Lecture notes of Mechanical Engineering- Application of Fluid Dynamics. (2018).

Publisher : Application of Fluid Dynamics.

Year : 2018

EFFECT OF CHANGE IN FREQUENCY DURING ULTRASONIC PULSED WATER JET TREATMENT OF AUSTENITIC STAINLESS STEEL SURFACE.

Cite this Research Publication : Madhulika Srivastava, Sergej Hloch, Somnath Chattopadhyaya, Amit Rai Dixit. EFFECT OF CHANGE IN FREQUENCY DURING ULTRASONIC PULSED WATER JET TREATMENT OF AUSTENITIC STAINLESS STEEL SURFACE. International Conference on Manufacturing Engineering and Materials, ICMEM, 18th -21st June 2018, Nový Smokovec, Slovakia. Lecture notes of Mechanical Engineering- Advances in Manufacturing Engineering and Materials

Publisher : ICMEM

Year : 2017

PROSPECTIVE OF USING PULSATING WATER JET PEENING AS A SURFACE TREATMENT PROCESS

Cite this Research Publication : Madhulika Srivastava, Sergej Hloch, Rupam Tripathi, Drazan Kozak, Somnath Chattopadhyaya, Amit Rai Dixit, Josef Foldyna, Pavol Hvizdos, Martin Fides, Pavel Adamcik. PROSPECTIVE OF USING PULSATING WATER JET PEENING AS A SURFACE TREATMENT PROCESS. Proceedings of the Conference on Water Jetting Technology Water Jet 2017 – Research, Development, Applications, September 13-15, 2017, Lednice, Czech Republic.

Publisher : Proceedings of the Conference on Water Jetting Technology Water Jet

Year : 2017

EXPERIMENTAL STUDY ON THE DEPTH OF CUT GRANITE IN PULSATING WATER-JET.

Cite this Research Publication : Rupam Tripathi , Sergej Hloch, Madhulika Srivastava, Vivek Nigam, Somnath Chattopadhyaya, Alok Kumar Das. EXPERIMENTAL STUDY ON THE DEPTH OF CUT GRANITE IN PULSATING WATER-JET. 1st International Conference on Mechanical Materials and Renewable Energy, ICMMR,6-10 June 2017, Manipal , India.

Publisher : ICMMR

Year : 2016

PERFORMANCE ANALYSIS OF ABRASIVE WATER JET MACHINING: A REVIEW

Cite this Research Publication : Rupam Tripathi, Madhulika Srivastava, Mohammed Shariq, Somnath Chattopadhyaya, Alok Kumar Das, Sergej Hloch. PERFORMANCE ANALYSIS OF ABRASIVE WATER

JET MACHINING: A REVIEW. In: Book of abstracts of qPace International Conference,9- 11 January 2016, ISM Dhanbad,pp.101

Publisher : Book of abstracts of qPace International Conference

Year : 2016

ABRASIVE WATER JET MACHINING OF HARD TO MACHINE MATERIALS: A REVIEW.

Cite this Research Publication : Madhulika Srivastava, Rupam Tripathi, Mohammed Shariq, Somnath Chattopadhyaya, Amit Rai Dixit, Sergej Hloch. ABRASIVE WATER JET MACHINING OF HARD TO MACHINE MATERIALS: A REVIEW. In: Book of abstracts of qPace International Conference,9-11 January 2016,ISM Dhanbad, pp.100.

Publisher : Book of abstracts of qPace International

Year : 2016

MONITORING OF ACOUSTIC EMISSION DURING THE DISINTEGRATION OF ROCK.

Cite this Research Publication : Rupam Tripathi , Madhulika Srivastava, Sergej Hloch, Pavel Adamčík, Somnath Chattopadhyayaa, Alok Kumar Das. MONITORING OF ACOUSTIC EMISSION DURING THE DISINTEGRATION OF ROCK. Procedia Engineering, International Conference on Manufacturing Engineering and Materials, ICMEM,6-10 June 2016, Nový Smokovec, Slovakia, (2016)

Publisher : ICMEM

Year : 2016

FEASIBILITY STUDY OF FRICTION SURFACED COATINGS OVER NON-FERROUS SUBSTRATES.

Cite this Research Publication : Mohammed Shariq, Madhulika Srivastava, Rupam Tripathi, Somnath Chattopadhyaya,Amit Rai Dixit. FEASIBILITY STUDY OF FRICTION SURFACED COATINGS OVER NON-FERROUS SUBSTRATES. Procedia Engineering, International Conference on Manufacturing Engineering and Materials, ICMEM,6-10 June 2016, Nový Smokovec, Slovakia, (2016)

Publisher : Procedia Engineering

Year : 2016

POTENTIAL OF USING WATER JET PEENING AS A SURFACE TREATMENT PROCESS FOR WELDED JOINTS

Cite this Research Publication : Madhulika Srivastava, Rupam Tripathi, Sergej Hloch, Somnath Chattopadhyayaa, Amit Rai Dixit. POTENTIAL OF USING WATER JET PEENING AS A SURFACE TREATMENT PROCESS FOR WELDED JOINTS. Procedia Engineering, International Conference on Manufacturing Engineering and Materials, ICMEM,6-10 June 2016, Nový Smokovec, Slovakia, (2016).

Publisher : Procedia Engineering

Year : 2016

CHARACTERIZATION, MATHEMATICAL MODELLING AND OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION SURFACED COATING OF FERROUS AND NON FERROUS ALLOYS

Cite this Research Publication : Mohammed Shariq, Madhulika Srivastava, Rupam Tripathi, Somnath Chattopadhyaya, Amit Rai Dixit, Pedro Vilaca, Rebeka Rudolf. CHARACTERIZATION, MATHEMATICAL MODELLING AND OPTIMIZATION OF PROCESS PARAMETERS OF FRICTION SURFACED COATING OF FERROUS AND NON FERROUS ALLOYS. Presented in: 2nd joint doctoral students conference POZ:MAR 2016, 30 June - 1 July ,Maribor,Slovenia ,pp.12.

Publisher : 2nd joint doctoral students conference POZ:MAR

Education
  • 2015-2021: Ph.D. (Water jet Peening) Indian Institute of Technology (Indian School of Mines), Dhanbad.
  • 2013-2015: Masters of Technology in Mechanical Engineering with Specialization in Manufacturing. Indian Institute of Technology (Indian School of Mines), Dhanbad.
  • 2007-2011: Bachelor of Engineering in Mechanical Engineering.  Uttar Pradesh Technical University, Lucknow.

 

Experience
  • August 2020- Present: Assistant Professor, Amrita School of Engineering, Amrita Vishwa Vidhyapeethan, Chennai. 
Awards and Recognition
  • Bronze award for best paper in Water jet Technology session for the article “Potential of using water jet peening as a surface treatment process for welded joints” presented at International Conference on Manufacturing Engineering and Materials, ICMEM 2016, 6th – 10th June 2016, Nový Smokovec, Slovakia.
  • Gold award for best paper in Water jet Technology session for the article “Effect of change in frequency during ultrasonic pulsed water jet treatment of austenitic stainless steel surface” presented at International Conference on Manufacturing Engineering and Materials, ICMEM 2018, 18th -21st June 2018, Nový Smokovec, Slovakia.
  • Qualified CSIR-NET in the year 2012 from subject Engineering Sciences.
  • Received ERASMUS + Scholarship for carrying out the research work for three months at Technical University of Kosice, Slovakia.
Technical Skills
  • AutoCAD 
  • MATLAB 
  • Solidworks 
Courses Taught
  1. Engineering Graphics-CAD 
  2. Computer Aided Drafting 
  3. Engineering Mechanics 
  4. Machine Drawing 
  5. Additive Manufacturing 
Technical Society Membership
  1. Associate Member of Institute of Engineers (Lifetime Membership)

 

Workshops and Training Programs Attended
  1. September 13-17, 2021: Participated in Online Training Programme on “Question Paper Authoring and Student Evaluation” by NITTTR Chennai.
  2. September 6-10, 2021: Attended FDP on “Advances  in  Novel  Composite Materials: Fabrication, Analysis and Optimization” (ATAL Training and Learning Academy)
  3. August 25-28, 2021: Attended Professional Development program on “Fundamentals of Geometric Dimensioning and Tolerancing” by SAE India
  4. December 7-11, 2021: Attended FDP on “3d Printing and Design” by ATAL Training and Learning Academy
  5. January 15, 2020: Attended one day International workshop on “Precision Engineering and Management” at IIT ISM Dhanbad.
  6. December 7-8, 2019: Attended two day International workshop on “Water Jet Processes and its related 4.0 Applications” at IIT ISM Dhanbad.
  7. June 18-21, 2018: Attended “International Conference on Manufacturing Engineering and Materials, ICMEM 2018, at Nový Smokovec, Slovakia.”
  8. June 12-14, 2017: Attended three day International workshop on “Water Jet Technology” at the Technical University of Koscie, Slovakia.
  9. June 6-10, 2016: Attended “International Conference on Manufacturing Engineering and Materials, ICMEM 2016, at Nový Smokovec, Slovakia.
  10. December 19-21, 2016: Attended “International Conference on Application of fluid Dynamics”, at ISM Dhanbad.
  11. December 19-20, 2014: Attended “National Conference on Advances in Thermal Engineering”, at ISM Dhanbad.
Admissions Apply Now