Back close

Dr. M. Navaneetha Krishnan

Assistant Professor, Department of Mechanical Engineering, School of Engineering, Nagercoil

Qualification: M.E., Ph.D
m_navaneethakrishnan@nc.amrita.edu
Orcid Profile
Google Scholar Profile
Scopus Author ID
Research Interest: Metal Matrix Composites, Powder Metallurgy, Material science, Tribology and workability, Mechanical and micro structural Characterization, Optimizing Techniques, 3D printing

Bio

Dr. M. Navaneetha Krishnan serves as an Assistant Professor in the Department of Mechanical Engineering at the School of Engineering, Amrita Vishwa Vidyapeetham, Nagercoil Campus. He received his Doctor of Philosophy degree (under the Faculty of Mechanical Engineering) from Anna University, Chennai, specializing in Metal Matrix Composites.

He has around 10 years of teaching experience. His areas of interest include Metal Matrix Composites, Powder Metallurgy, Material science, Tribology and workability, Mechanical and micro structural Characterization, Optimizing Techniques, 3D printing. He has published research papers in reputed journals

Publications

Journal Article

Year : 2024

Analysis of an Economic Pyrolysis plant to convert plastic waste to liquid fuel

Cite this Research Publication : Sundar V., Jayadhass A., Navaneetha Krishnan M., Vijaya Nanthini C., “Analysis of an Economic Pyrolysis plant to convert plastic waste to liquid fuel”, International Journal of Electrical and Computer System Design, Vol. 5, pp 7–11, 2024.

Publisher : Institute of Advanced Engineering and Science

Year : 2024

Effect of surface roughness on the mechanical performance of a 3D printed PLA component

Cite this Research Publication : Navaneetha Krishnan M., Sundar V., Jayadhass A., Suresh S., Vijaya Nanthini C., “Effect of surface roughness on the mechanical performance of a 3D printed PLA component”, International Journal of Electrical and Computer System Design, Vol. 5, pp 1–6, 2024.

Year : 2024

Enhanced Performance of Mg (AZ91) Composites with Nano B4C: A Comprehensive Study of Microstructure, Mechanical Properties, Acoustic Emission and Thermogravimetric Analysis

Cite this Research Publication : M. Navaneetha Krishnan, S. Suresh, C. Emmy Prema, Enhanced Performance of Mg (AZ91) Composites with Nano B4C: A Comprehensive Study of Microstructure, Mechanical Properties, Acoustic Emission and Thermogravimetric Analysis, Transactions of the Indian Institute of Metals, Springer Science and Business Media LLC, 2024, https://doi.org/10.1007/s12666-024-03412-x

Publisher : Springer Science and Business Media LLC

Year : 2023

Simultaneous Optimization of Machining tolerance and asymmetric quality loss for Gear box assembly in four stack up conditions

Cite this Research Publication : Sampath Kumar R., Tamilarasan A., Rajasekaran P., Navaneetha Krishnan M., “Simultaneous Optimization of Machining tolerance and asymmetric quality loss for Gear box assembly in four stack up conditions”, High Technology Letters, Vol. 29, pp 651-661, 2023

Year : 2022

A Novel Efficient Video Smoke Detection Algorithm Using Co-occurrence of Local Binary Pattern Variants

Cite this Research Publication : C. Emmy Prema, S. Suresh, M. Navaneetha Krishnan, N. Leema, A Novel Efficient Video Smoke Detection Algorithm Using Co-occurrence of Local Binary Pattern Variants, Fire Technology, Springer Science and Business Media LLC, 2022, https://doi.org/10.1007/s10694-022-01306-2

Publisher : Springer Science and Business Media LLC

Year : 2022

Effect of B4C on strength coefficient, cold deformation and work hardening exponent characteristics of Mg composites

Cite this Research Publication : S. Suresh, M. Navaneetha Krishnan, S.C. Vettivel, Effect of B4C on strength coefficient, cold deformation and work hardening exponent characteristics of Mg composites, Journal of Magnesium and Alloys, Elsevier BV, 2022, https://doi.org/10.1016/j.jma.2020.09.010

Publisher : Elsevier BV

Year : 2022

Influence of Acoustic Emission Signals and Damage Analysis During the Tensile Test on Al8011 Hybrid Composites by Stir Casting Method

Cite this Research Publication : C.R. Kannan, S. Suresh, M. Navaneetha Krishnan, Influence of Acoustic Emission Signals and Damage Analysis During the Tensile Test on Al8011 Hybrid Composites by Stir Casting Method, Archives of Metallurgy and Materials, Polish Academy of Sciences Chancellery, 2022, https://doi.org/10.24425/amm.2023.141498

Publisher : Polish Academy of Sciences Chancellery

Year : 2021

Image Texture Description, Surface-Grains Structure Morphology and Prediction of Wear Parameters for Mg/B4C Composites Using Response Surface Methodology

Cite this Research Publication : M. Navaneetha Krishnan, S. Suresh, S. C. Vettivel, C. Emmy Prema, J. Arun, P. Thirunamakodi, Image Texture Description, Surface-Grains Structure Morphology and Prediction of Wear Parameters for Mg/B4C Composites Using Response Surface Methodology, Metals and Materials International, Springer Science and Business Media LLC, 2021, https://doi.org/10.1007/s12540-021-01042-2

Publisher : Springer Science and Business Media LLC

Year : 2020

Effects on Micro-Surface Texturing of Mg/B4C Matrix Composites Under Dry Sliding Wear Condition

Cite this Research Publication : M. Navaneetha Krishnan, S. Suresh, S. C. Vettivel, Effects on Micro-Surface Texturing of Mg/B4C Matrix Composites Under Dry Sliding Wear Condition, Transactions of the Indian Institute of Metals, Springer Science and Business Media LLC, 2020, https://doi.org/10.1007/s12666-020-01913-z

Publisher : Springer Science and Business Media LLC

Year : 2020

A Novel Image Processing Technique for Analyzing Wear Worn Surface Roughness and Corrosion Behavior of Sintered Mg/B4C Composites

Cite this Research Publication : M. Navaneetha Krishnan, S. Suresh, S. C. Vettivel, C. Emmy Prema, C. P. Jesuthanam, A Novel Image Processing Technique for Analyzing Wear Worn Surface Roughness and Corrosion Behavior of Sintered Mg/B4C Composites, Transactions of the Indian Institute of Metals, Springer Science and Business Media LLC, 2020, https://doi.org/10.1007/s12666-020-02123-3

Publisher : Springer Science and Business Media LLC

Year : 2018

Characterization, formability, various stresses and failure analysis on workability of sintered Mg-5C composite under triaxial stress state condition

Cite this Research Publication : M. Navaneetha Krishnan, S. Suresh, S.C. Vettivel, Characterization, formability, various stresses and failure analysis on workability of sintered Mg-5%B4C composite under triaxial stress state condition, Journal of Alloys and Compounds, Elsevier BV, 2018, https://doi.org/10.1016/j.jallcom.2018.02.320

Publisher : Elsevier BV

Year : 2014

Workability Behavior of Copper–Tungsten and Graphite Composites

Cite this Research Publication : Navaneetha Krishnan M., Vettivel S.C., Karthikeyan G., “Workability Behavior of Copper–Tungsten and Graphite Composites”, Trends in Machine Design, Vol. 1(2), pp. 12-22, 2014.

Publisher : STM Journals

Book Chapter

Year : 2023

A novel surface modification and mechanical characteristics on 3D-printed PLA-Al composite using laser surface irradiation

Cite this Research Publication : Navaneetha Krishnan M, Suresh S, Emmy Prema C, “A Novel surface modification and mechanical characteristics on 3D-printed PLA-Al composite using laser surface irradiation”, Book Chapters for Mechanical Properties and Characterization of Additively Manufactured Materials, 1st edition, PP. 97-104, Taylor & Francis Group, CRC Press (ISBN: 9781032392776), 2023.

Conference Proceedings

Year : 2022

Proceeding of 1st National Conference on Recent Advancements in Civil, Mechanical and Management Studies

Cite this Research Publication : Navaneetha Krishnan M, Akash S L, Abishek Chandran J, Sharan S, Sree Ram P M. (2022, July 9). Computer Aided Design of Side Actions for Injection Molding of Complex Parts, National Conference on Recent Advancements in Civil, Mechanical and Management Studies (NCRACMM’22), Amrita College of Engineering and Technology, Nagercoil, India. REST Publisher, Vol. 2(2), pp. 162. ISBN: 978-81-948459-4-2. https://doi.org/10.46632/daai/2/2/9

Publisher : REST Publisher

FDP / Workshops
  1. Attended one week Faculty Development Program on “Digital Teaching Techniques” organized by ICT Academy, from 05.02.2021 to 09.02.2021.
  2. Attended two weeks Faculty Development Program on “Advances in Composite Materials, Manufacturing Processes and Optimization Techniques” organized by AMET University, Chennai, from 01.06.2021 to 14.06.2021.
  3. Attended one week Faculty Development Program on “Advances in Manufacturing” organized by BIT Sindri, Dhanband, from 15.06.2021 to 19.06.2021.
  4. Attended Six Days Faculty Development Program on “Finite Element Analysis” organized by University College of Engineering BIT Campus Tiruchirappalli, from 21.06.2021 to 26.06.2021.
  5. Attended two Weeks Faculty Development Program on “MATLAB and LabVIEW Programming for Engineering Applications” organized by National Institute of Technical Teachers Training and Research, Chennai, from 24.01.2022 to 04.02.2022.
  6. Attended one Week Faculty Development Program on “Renewable Energy Applications” organized by National Institute of Technical Teachers Training and Research, Chennai, from 28.02.2022 to 04.03.2022.
  7. Participated in the workshop “Innovation Ambassador Training” from 30.06.2021 to 31.07.2021 organized by MoE’s Innovation Cell & AICTE.
  8. Participated in the workshop “Springer, Nature Author Workshop” on 27.02.2017 organized by Anna University, Chennai.
  9. Participated in the workshop “How to Write a Research Paper” on 10.08.2017 and 11.08.2017 organized by Mepco Schlenk Engineering College, Sivakasi.
  10. Participated in the workshop “Research Methodology” on 03.12.2016 organized by Kings Engineering College, Chennai.
  11. Participated in the workshop “Recent Trends in Optimization” on 10.12.2015 organized by University College of Engineering, Nagercoil.
  12. Participated in the workshop “Composites & Their Applications in Aerospace & Automotives” on 21.09.2015 and 22.09.2015 organized by Rajas Engineering College, Vadakkangulam.
  13. Participated in the workshop “Recent Trends in Composite Materials” on 12.02.2016 organized by PET Engineering College, Vallioor.
Awards
  1. Received “Third Anna University Rank in M.E.” in June 2014.
  2. Received “Academic Excellence in M.E – Certificate of Merit” in March 2014.
Conferences Attended
  1. Navaneetha Krishnan M. (2023, July 20-21). Mechanical Characteristics on Al-PLA Composites Fabricated by 3D Printing, International Conference on Electrical, Electronics, Computer Science and Mechanical Engineering, St. Joseph University, Tanzania.
  2. Navaneetha Krishnan M. (2023, July 20-21). Analysis of an Economic Pyrolysis Plant to Convert Plastic Waste to Liquid Fuel, International Conference on Electrical, Electronics, Computer Science and Mechanical Engineering, St. Joseph University, Tanzania.
  3. Thillai Raj E, Navaneetha Krishnan M. (2019, April 5-6). Workability Behavior of Sintered Tungsten and Graphite Reinforced Copper Hybrid Composites, International Conference on Advances in Mechanical Engineering and Research (ICAMER 2K19), Rohini College of Engineering & Technology, Palkulam, India.
  4. Navaneetha Krishnan M, Suresh S, Vettivel S C. (2018, March 16). Workability Behavior of Magnesium-Boron Carbide Composites, National Conference on Engineering Applications (NCEA-2018), Universal College of Engineering and Technology, Vallioor, India.
  5. Navaneetha Krishnan M, Suresh S, Vettivel S C. (2018, March 16). Synthesis of Mg-B4C Composite Using Powder Metallurgy Technique, National Conference on Engineering Applications (NCEA-2018), Universal College of Engineering and Technology, Vallioor, India.
  6. Navaneetha Krishnan M, Karthikeyan G. (2014, April 2). Compressibility Study in Copper-Tungsten and Graphite Composite, National Conference on Racing Car Dynamics (CRDi 2K14), Noorul Islam University, Kumaracoil, India.
  7. Navaneetha Krishnan M, Karthikeyan G. (2014, April 4-5). Workability Behavior of Copper-Tungsten and Graphite Composite, National Conference on Advancements in Mechanical Engineering and Nano Technology, PSN Engineering College, Melathediyoor, India.
  8. Navaneetha Krishnan M. (2023, May 10). Design and Fabrication of Automatic Palm and Coconut Tree Climbing Machine, International Conference on Advanced Materials, Modern Manufacturing and Computerized Automation, JCT College of Engineering and Technology, Coimbatore, India.
  9. Navaneetha Krishnan M. (2023, May 10). Investigation of Tribological and Corrosion Behavior of Ti-B4C MMC Composites, International Conference on Advanced Materials, Modern Manufacturing and Computerized Automation, JCT College of Engineering and Technology, Coimbatore, India.
Admissions Apply Now