Back close

Performance Enhancement of UHMWPE with Surface Functionalized Multiwalled Carbon Nanotubes/Graphite

Publication Type : Book Chapter

Publisher : Structural Integrity Assessment, Springer Singapore,

Source : Structural Integrity Assessment, Springer Singapore, Singapore, p.231-240 (2020)

Url : https://link.springer.com/chapter/10.1007/978-981-13-8767-8_19

ISBN : 9789811387678

Keywords : Graphite, Mechanical properties, MWCNT, nanocomposite, Thermal behaviour, UHMWPE

Campus : Coimbatore

School : School of Engineering

Center : Center for Excellence in Advanced Materials and Green Technologies

Department : Chemical, Mechanical Engineering

Year : 2020

Abstract : Carbon nanostructures have been effectively used to reinforce polymers due to their excellent mechanical propertiesMechanical properties. This paper investigates the thermal and mechanical properties of ultra-high-molecular weight polyethylene UHMWPEUHMWPE nanocompositesNanocomposite reinforced with acid-modified multi-walled carbon nanotubes (MWCNT)Multi-Walled Carbon Nanotubes (MWCNT) and graphiteGraphite. The UHMWPEUHMWPE nanocomposites were prepared by melt mixing at 200 °C. The test specimens were compression moulded at 215 °C and 7.36 MPa and mechanical and thermal properties were studied with respect to nanofiller content. Evaluation of mechanical and thermal properties of the nanocompositesNanocomposite showed that the addition of up to 1% MWCNTMulti-Walled Carbon Nanotubes (MWCNT) to the UHMWPE significantly improved the tensile and flexural properties by 30%. In the case of graphiteGraphite, tensile properties decreased while flexural property increased. While the thermal properties such as specific enthalpy and percentage of crystallinity increased with nanofiller content. These observed results are attributed to the nanofiller content as well as the dispersion of the nanofiller in the polymer, which was substantiated by morphological analysis using transmission electron microscopy. However, at higher concentration of carbon nanofillers, both mechanical and thermal properties showed a slight decline due to the formation of agglomerates.

Cite this Research Publication : S. P. Kumar, K. Reddy, S. Narendra, Unnikrishnan D., and Dr. Meera Balachandran, “Performance Enhancement of UHMWPE with Surface Functionalized Multiwalled Carbon Nanotubes/Graphite”, in In Structural Integrity Assessment, R. V. Prakash, R. Kumar, S., Nagesha, A., Sasikala, G., and Bhaduri, A. Kumar, Eds. Singapore: Springer Singapore, 2020, pp. 231-240.

Admissions Apply Now