Publication Type : Journal Article
Publisher : MDPI AG
Source : Machines
Url : https://doi.org/10.3390/machines14090977
Campus : Coimbatore
School : School of Engineering
Year : 2026
Abstract : Passive tuned mass dampers (TMDs) can reduce chatter, but designing and fabricating an accurately tuned absorber remains challenging due to manufacturing constraints. This study proposes a Design of Experiments and Finite Element Analysis (DOE-FEA) based constrained design optimization framework for a passive two-degree-of-freedom (TDOF) TMD to suppress regenerative chatter in boring operations by considering practical and manufacturing constraints on absorber position, mass ratio, moment of inertia and fixed inter-spring distance. The proposed, additively manufactured TMD housing, made from polylactic acid (PLA), includes a mass block supported by two spring-damper elements that enable coupled translational and rotational interactions with the boring bar. A finite-element forced vibration analysis of the boring bar TMD system is developed to obtain the real and imaginary parts of the frequency response function (FRF), which are then used to construct the stability lobes. The minimum limiting depth of cut over the spindle speed range is used as the optimization criterion, and response surface methodology (RSM) is used to obtain optimum absorber parameters within realistic design constraints. The dynamic behaviour of the TDOF TMD is experimentally and numerically evaluated and compared with that of a single-degree-of-freedom (SDOF) TMD, attributing the relative improvement in performance primarily to the combined effects of independent absorber architecture, mass, stiffness and damping distribution and dynamic tuning. The results showed that the optimal TDOF TMD achieved a DOC of 11.054 mm, while the SDOF TMD achieved 4.335 mm. The experimental investigation of additively manufactured TDOF and SDOF TMDs demonstrated qualitatively similar dynamic phenomena to those of the corresponding numerically optimized absorbers. Time-domain acceleration response, spectrogram and power spectrum were used to compare these dynamic phenomena demonstrated by the SDOF and TDOF TMDs. A reduction in corresponding first and second amplitude peaks from −2.8 dB (670 Hz) and −22.7 dB (1360 Hz) in the case of the SDOF TMD to −17.6 dB (600 Hz) and −23.8 dB (1150 Hz) for the TDOF TMD verified the vibration attenuation and frequency redistribution phenomenon as exhibited by the FE-model.
Cite this Research Publication : Saravanamurugan Sundaram, Shravan Chidambaresh, Krishna Prakash Jayaprakash, Jana Petru, Thenarasu Mohanavelu, Design and Optimization of an Additively Manufactured Two-DOF Tuned Mass Damper for Chatter Stability in Boring Process, Machines, MDPI AG, 2026, https://doi.org/10.3390/machines14090977