Back close

Saravanan R.

Assistant Professor (SG) , Department of Mechanical Engineering, School of Engineering, Coimbatore

Qualification: M.Tech
r_saravanan@cb.amrita.edu
Research Interest: Lean Manufacturing, Material Science & Manufacturing Engineering

Bio

Saravanan R. currently serves as Assistant Professor (SG) at Department of Mechanical Engineering, School of Engineering, Coimbatore Campus. His areas of research include Material Science and Manufacturing Engineering and Lean Manufacturing.

Publications

Journal Article

Year : 2020

Effect of preheating temperatures on distribution of FeTiO3 on A 360 aluminium alloy by stirring

Cite this Research Publication : K. Vamsi, Krishnakumar, M., and Saravanan R., “Effect of preheating temperatures on distribution of FeTiO3 on A 360 aluminium alloy by stirring”, Materials Today: Proceedings, vol. 27, pp. 2412-2417, 2020.

Publisher : Materials Today: Proceedings,

Year : 2020

An investigation on the microstructure, wear rate and hardness of Surface alloying Ni-Hard 4 cast iron with Tungsten Using GTA

Cite this Research Publication : K. Thilipkumar, Sellamuthu, R., and Saravanan R., “An investigation on the microstructure, wear rate and hardness of Surface alloying Ni-Hard 4 cast iron with Tungsten Using GTA”, Materials Today: Proceedings, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018, 16th -18th August, 2018, India, vol. 24, pp. 548 - 556, 2020.

Publisher : Materials Today: Proceedings, International Conference on Advances in Materials and Manufacturing Applications,

Year : 2020

Study of mechanical and tribological properties of LM9 alloy reinforced with BN and WC

Cite this Research Publication : A. Raj and Saravanan R., “Study of mechanical and tribological properties of LM9 alloy reinforced with BN and WC”, Materials Today: Proceedings, vol. 24, pp. 912-920, 2020.

Publisher : Materials Today: Proceedings,

Year : 2020

Improvement in hardness, wear rate and corrosion resistance of silicon bronze using gas tungsten arc

Cite this Research Publication : A. Aravind and Saravanan R., “Improvement in hardness, wear rate and corrosion resistance of silicon bronze using gas tungsten arc”, Materials Today: Proceedings, vol. 24, pp. 406-414, 2020.

Publisher : Materials Today: Proceedings,

Year : 2020

Evaluation on Mechanical Properties of Lm14 Reinforced with Paper Sludge Ash

Cite this Research Publication : R. Niranjan, Rajendrakumar, N., and Saravanan R., “Evaluation on Mechanical Properties of Lm14 Reinforced with Paper Sludge Ash”, Materials Today: Proceedings, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018, 16th -18th August, 2018, India, vol. 24, no. Part 2, pp. 1210 - 1216, 2020.

Publisher : Materials Today: Proceedings, International Conference on Advances in Materials and Manufacturing Applications, IConAMMA 2018,

Year : 2020

Effect of Bio-Fluid on the Corrosion Properties of Tungsten Surface Alloyed Under Nitrogen on Austenitic Stainless Steel

Cite this Research Publication : M. Krishnakumar, Saravanan R., and Narayanan, V., “Effect of Bio-Fluid on the Corrosion Properties of Tungsten Surface Alloyed Under Nitrogen on Austenitic Stainless Steel”, Journal of Bio- and Tribo-Corrosion, vol. 6, no. 3, p. 77, 2020.

Publisher : Journal of Bio- and Tribo-Corrosion

Year : 2019

Evaluation of Weld Joint: Cupro – Nickel with Aluminium 5083

Cite this Research Publication : Saravanan R., Dominic, M., and Krishnakumar, “Evaluation of Weld Joint: Cupro – Nickel with Aluminium 5083”, International Journal of Recent Technology and Engineering (IJRTE), vol. 8, no. 3, 2019.

Publisher : International Journal of Recent Technology and Engineering (IJRTE)

Year : 2019

Microstructure, Hardness and Corrosion Resistance of Surface Modified Ni – Hard 4 Cast Iron with Nitrogen Using Gas Tungsten Arc

Cite this Research Publication : Saravanan R., “Microstructure, Hardness and Corrosion Resistance of Surface Modified Ni - Hard 4 Cast Iron with Nitrogen Using Gas Tungsten Arc”, International Journal of Recent Technology and Engineering (IJRTE), 2019.

Publisher : International Journal of Recent Technology and Engineering (IJRTE)

Year : 2019

Surface alloying on austenitic stainless steel with titanium and tungsten using gas tungsten arc

Cite this Research Publication : M. Krishnakumar and Saravanan R., “Surface alloying on austenitic stainless steel with titanium and tungsten using gas tungsten arc”, Engineering Research Express, vol. 1, no. 2, p. 025005, 2019.

Publisher : Engineering Research Express, IOP Publishing,

Year : 2019

Impact of tungsten on the surface of aluminium-silicon alloy on microstructure, hardness and wear rate using GTA

Cite this Research Publication : Saravanan R., Nair, S., and Krishnakumar, M., “Impact of tungsten on the surface of aluminium-silicon alloy on microstructure, hardness and wear rate using GTA”, IOP Conference Series: Materials Science and Engineering, vol. 577, p. 012124, 2019.

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing,

Year : 2019

Surface modification of Ni-hard 4 cast iron with titanium using GTA heat source

Cite this Research Publication : K. S. Raghul Anandh, Thilipkumar, K., and Saravanan R., “Surface modification of Ni-hard 4 cast iron with titanium using GTA heat source”, IOP Conference Series: Materials Science and Engineering, vol. 577, p. 012129, 2019.

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing,

Year : 2019

Reduction of Noise in The Vehicle Cabin by Using Natural Fibres with Polyurethane and Comparison with Other acoustic Materials

Cite this Research Publication : R. Vankayala, Saravanan R., and Lakshmikanthan C., “Reduction of Noise in The Vehicle Cabin by Using Natural Fibres with Polyurethane and Comparison with Other acoustic Materials”, IOP Conference Series: Materials Science and Engineering, vol. 577, p. 012013, 2019.


Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing,

Year : 2019

Impact of Surface Alloying of Nickel on Microstructure, Hardness and Wear on Aluminium–12%Silicon Alloy

Cite this Research Publication : M. Krishnakumar, Mohnbabu, A., and Saravanan R., “Impact of Surface Alloying of Nickel on Microstructure, Hardness and Wear on Aluminium–12%Silicon Alloy”, Transactions of the Indian Institute of Metals, 2019.

Publisher : Transactions of the Indian Institute of Metals, Springer (2019)

Year : 2019

Impact of tungsten on microstructure, hardness and wear rate of AISI 304 stainless steel surface alloyed under nitrogen environment

Cite this Research Publication : M. Krishnakumar and Saravanan R., “Impact of tungsten on microstructure, hardness and wear rate of AISI 304 stainless steel surface alloyed under nitrogen environment”, Materials Research Express, vol. 6, 2019.

Publisher : Materials Research Express, Institute of Physics Publishing

Year : 2018

Assessment of DNA damage in pulmonary tuberculosis patients by comet assay

Cite this Research Publication : Dr. M.P.Narmadha, S, U. A., A, M., Saravanan R., and D, S., “Assessment of DNA damage in pulmonary tuberculosis patients by comet assay”, Indo American Journal of Pharmaceutical research IAJPR, vol. 4(3), pp. 1574-1580, 2018.

Publisher : Indo American Journal of Pharmaceutical research IAJPR

Year : 2018

Effect of Nickel content on hardness and wear rate of surface modified cast aluminum bronze alloy

Cite this Research Publication : Saravanan R., Nair, S., and .Sellamuthu, R., “Effect of Nickel content on hardness and wear rate of surface modified cast aluminum bronze alloy”, Materials Today: Proceedings, vol. 5, no. 2, pp. Pages 6617-6625, 2018.

Publisher : Materials Today: Proceedings

Year : 2016

Microstructure, Hardness and Wear Rate of A356 Aluminium Alloy Surface Alloyed with Nitrided Titanium using GTA

Cite this Research Publication : Saravanan R., Srihari, S., Arvind, A., Sreeranj, P., Dheeraj, K., Sellamuthu, R., and Dr. Sanjivi Arul, “Microstructure, Hardness and Wear Rate of A356 Aluminium Alloy Surface Alloyed with Nitrided Titanium using GTA”, Indian Journal of Science and Technology, vol. 9, 2016.

Publisher : Indian Journal of Science and Technology,

Year : 2014

Determination of the Effect of Si Content on Microstructure, Hardness and Wear Rate of Surface-refined Al-Si Alloys

Cite this Research Publication : Saravanan R. and R. Sellamuthu, “Determination of the Effect of Si Content on Microstructure, Hardness and Wear Rate of Surface-refined Al-Si Alloys”, Procedia Engineering, vol. 97, pp. 1348 - 1354, 2014.

Publisher : Procedia Engineering

Conference Paper

Year : 2020

Technology enabled pathways for a waste free village

Cite this Research Publication : S. Kumar P, Pranay, N., G, I. Bharathi, Suchit, Y., Saravanan R., Nandanan, K., and Renjith Mohan, “Technology enabled pathways for a waste free village”, in ICDSMLA 2019 International Conference on Data Sciences, Machine Learning and Applications, Lecture Notes in Electrical Engineering, 2019.

Publisher : SpringerBriefs in Applied Sciences and Technology

Year : 2018

Microstructure, hardness and wear rate of heat treated Titanium surface alloyed AISI 304 stainless steel

Cite this Research Publication : K. M. Kumar, Saravanan R., R. Sellamuthu, and Narayanan, V., “Microstructure, hardness and wear rate of heat treated Titanium surface alloyed AISI 304 stainless steel”, in Materials Today: Proceedings, 2018, vol. 5, pp. 7571-7576.

Publisher : Materials Today: Proceedings

Year : 2018

Effect of surface modification on microstructure, hardness and wear rate of steels with 0.2%, 0.4% and 1.1 Wt%C by the addition of Titanium using Gas Tungsten Arc

Cite this Research Publication : C. M. Mithun, R. Sellamuthu, and Saravanan R., “Effect of surface modification on microstructure, hardness and wear rate of steels with 0.2%, 0.4% and 1.1 Wt%C by the addition of Titanium using Gas Tungsten Arc”, in Materials Today: Proceedings, 2018, vol. 5, pp. 7586-7594.

Publisher : Materials Today: Proceedings

Year : 2014

An investigation of the effect of surface refining on the hardness and the wear properties of Al-Si alloy

Cite this Research Publication : Saravanan R. and R., S., “An Investigation of the Effect of Surface Refining on the Hardness and the Wear Properties of Al-Si Alloy”, in Dynamics of Machines and Mechanisms, Industrial Research, 2014, vol. 592-594, pp. 53-57.

Publisher : Dynamics of Machines and Mechanisms, Industrial Research, Trans Tech Publications Ltd,

Admissions Apply Now