Year : 2022
Hot Corrosion Demeanour Comparison of Constant and Pulsed Current Welded Hastelloy X in Na2SO4, V2O5, and NaCl Salt Mixture at 900 °C
Cite this Research Publication : M Sathishkumar, M Manikandan, N Arivazhagan, B Arulmurugan, Vignesh M, S Rajakumar, S Rajkumar, “Hot Corrosion Demeanour Comparison of Constant and Pulsed Current Welded Hastelloy X in Na2SO4, V2O5, and NaCl Salt Mixture at 900 °C” - Materials Research Express (IOP)
Publisher : IOP
Year : 2022
Machinability Analysis of Y2O3 Reinforced Magnesium Rare Earth Alloys Using WEDHT process
Cite this Research Publication : Vignesh M, R Ramanujam, Gururaj Parande, Manoj Gupta, “Machinability Analysis of Y2O3 Reinforced Magnesium Rare Earth Alloys Using WEDHT process” - Machining Science and Technology (Taylor & Francis)
Publisher : Taylor & Francis
Year : 2021
Structural analysis of hybridized glass fiber hemp fiber reinforced composite wheel rim
Cite this Research Publication : R. Pugazhenthi, G. Anbuchezhiyan, R.K. Muthuraman, Vignesh M, A. Ponshanmugakumar, “Optimization of fatigue life and fractography analysis of knuckle joint”,Materials Today: Proceedings(Elsevier),
Publisher : Elsevier
Year : 2021
Numerical Modelling and Experimental validation of crater formation in WEDM Hybrid Turning of Ti6Al4V Alloy
Cite this Research Publication : Vignesh M, R Ramanujam, “Numerical Modelling and Experimental validation of crater formation in WEDM Hybrid Turning of Ti6Al4V Alloy”, Part E: Journal of Process Mechanical Engineering (Sage) Vol. 235:2 (2021) 392-404. (IF-1.620)
Publisher : Part E: Journal of Process Mechanical Engineering (Sage)
Year : 2021
Development of Biomedical Implants through Additive Manufacturing (AM) – A Review
Cite this Research Publication : Vignesh M, G. Ranjith Kumar, M. Sathishkumar, M. Manikandan, G. Rajyalakshmi, R. Ramanujam, N. Arivazhagan, “Development of Biomedical Implants through Additive Manufacturing (AM) – A Review”, Journal of Materials Engineering and Performance (Springer).Vol. 30 (2021)
Publisher : Springer
Year : 2021
Machinability Investigations on Aerospace Custom 450 Alloy Using TiAlN/TiCN, TiCN/TiAlN Coated and Uncoated Carbide Tools
Cite this Research Publication : T Sampath Kumar, Vignesh M, R Ramanujam, A. John Rajan, “Machinability Investigations on Aerospace Custom 450 Alloy Using TiAlN/TiCN, TiCN/TiAlN Coated and Uncoated Carbide Tools” Journal Européen des Systèmes Automatisés Vol. 54:2 (2021) 325-334. (Scopus Indexed).
Publisher : Journal Européen des Systèmes Automatisés
Year : 2021
Multi objective study on machining characteristics of AISI H-11 Tool steel prepared by different processing techniques
Cite this Research Publication : Vignesh M, R Ramanujam, “Multi objective study on machining characteristics of AISI H-11 Tool steel prepared by different processing techniques” Journal Européen des Systèmes Automatisés Vol. 54:2 (2021) 243-251.
Publisher : Journal Européen des Systèmes Automatisés
Year : 2021
Statistical modelling and analysis of material removal rate and surface roughness during Wire Electrical Discharge Hybrid Turning (WEDHT) process
Cite this Research Publication : Vignesh M, R Ramanujam, “Statistical modelling and analysis of material removal rate and surface roughness during Wire Electrical Discharge Hybrid Turning (WEDHT) process”, Sadhana (Springer). Vol. 46:73 (2021) 1-9 (IF-1.188)
Publisher : Springer
Year : 2019
A study on statistical analysis and modelling of MRR and surface roughness during WEDHT process
Cite this Research Publication : Presented the paper titled “A study on statistical analysis and modelling of MRR and surface roughness during WEDHT process” in the International Conference on Materials and Manufacturing Methods (MMM’19) held at NIT, Trichy on July 5-7, 2019.
Publisher : MMM’19
Year : 2019
Comparative machining studies on Custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach
Cite this Research Publication : T Sampath Kumar, R Ramanujam, Vignesh M, D Rohith, V Manoj, PH Sankar, “Comparative machining studies on Custom 450 alloy with TiCN, TiAlN coated and uncoated carbide tools using Taguchi-Fuzzy logic approach” in Materials Research Express (IOP), Vol. 6 (2019) 066411. (IF – 1.620)
Publisher : Materials Research Express (IOP)
Year : 2019
Machining investigation on Ti-6Al-4V alloy using a wire electrical discharge hybrid turning (WEDHT) process
Cite this Research Publication : Vignesh M, R Ramanujam, “Machining investigation on Ti-6Al-4V alloy using a wire electrical discharge hybrid turning (WEDHT) process” in Materials Research Express (IOP), Vol. 6 (2019)
Publisher : Materials Research Express (IOP)
Year : 2019
Machining of Ti–6Al–4V using diffusion annealed zinc‑coated brass wire in WEDHT
Cite this Research Publication : Vignesh M, R Ramanujam, “Machining of Ti–6Al–4V using diffusion annealed zinc‑coated brass wire in WEDHT” in Journal of the Brazilian Society of Mechanical Sciences and Engineering (Springer)
Publisher : Springer
Year : 2018
Improvement of Machinability Using Eco-Friendly Cutting Oil in Turning Duplex Stainless Steel
Cite this Research Publication : DA Ghatge, R Ramanujam, BS Reddy, Vignesh M, “Improvement of Machinability Using Eco-Friendly Cutting Oil in Turning Duplex Stainless Steel” in Materials Today: Proceedings (Elsevier), Vol. 5 (2018) 12303–12310. (Scopus Indexed)
Publisher : Elsevier
Year : 2018
A Comprehensive Review on Wire Electrical Discharge Based Hybrid Turning (WEDHT)
Cite this Research Publication : Vignesh M, R Ramanujam, P Kuppan, “A Comprehensive Review on Wire Electrical Discharge Based Hybrid Turning (WEDHT)” in Materials Today: Proceedings (Elsevier), Vol. 5 (2018) 12273–12284. (Scopus Indexed)
Publisher : Elsevier
Year : 2018
Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis
Cite this Research Publication : T Sampath Kumar, R Ramanujam, Vignesh M, N Tamiloli, Nishant Sharma, Shivam Srivastava, Akash Patel, “Comparative evaluation of performances of TiAlN, AlCrN, TiAlN/AlCrN coated carbide cutting tools and uncoated carbide cutting tools on turning Inconel 825 alloy using Grey Relational Analysis” in Sensors and Actuators A: Physical (Elsevier), Vol. 279 (2018)
Publisher : Elsevier
Year : 2018
Response optimisation in wire electrical discharge machining of AISI H11 tool steel using Taguchi – GRA approach
Cite this Research Publication : Vignesh M, R Ramanujam, “Response optimisation in wire electrical discharge machining of AISI H11 tool steel using Taguchi – GRA approach” in International Journal of Machining and Machinability of Materials (Inderscience), Vol. 20(5) (2018) 474-495. (Scopus Indexed)
Publisher : International Journal of Machining and Machinability of Materials (Inderscience)
Year : 2017
Enhancement of Performance of Solar Parabolic Trough Collector Using Selective Absorption Coating
Cite this Research Publication : AM Sukanta, Vignesh M, C Dhineshkumar, “Enhancement of Performance of Solar Parabolic Trough Collector Using Selective Absorption Coating” in Applied and Mechanics and Materials (Trans tech), Vol. 867 (2017) pp. 187-190.
Publisher : Applied and Mechanics and Materials (Trans tech)
Year : 2015
A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 alloy
Cite this Research Publication : Vignesh M, K Venkatesan, R Ramanujam, P Kuppan, “A Parametric Optimization on Cutting Force during Laser Assisted Machining of Inconel 718 alloy” in Applied Mechanics and Materials (Trans tech), Vol. No. 787 (2015) pp. 460-464.
Publisher : Applied Mechanics and Materials (Trans tech)
Year : 2015
Tool Wear Analysis of Al 6061 reinforced with 10 wt% Al2O3 Using High Hardened Inserts
Cite this Research Publication : Vignesh M, K Venkatesan, R Ramanujam, S Vijayan, “Tool Wear Analysis of Al 6061 reinforced with 10 wt% Al2O3 Using High Hardened Inserts” in Applied and Mechanics and Materials (Trans tech), Vol. 787 (2015) pp. 643-647.
Publisher : Applied and Mechanics and Materials (Trans tech)
Year : 2014
Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology
Cite this Research Publication : K Venkatesan, R Ramanujam, J Joel, P Jeyapandiarajan, Vignesh M, Darsh Jiten Tolia, R Venkata Krishna, “Study of Cutting force and Surface Roughness in machining of Al alloy Hybrid Composite and Optimized using Response Surface Methodology”, in Procedia Engineering (Elsevier), Vol. No. 97 (2014) pp. 677-686.
Publisher : Elsevier