Seizure information enrichment in ECG through spectral whitening for improving epileptic seizure prediction
Authors : Pooja Muralidharan, C. S. Kumar, R. Sankaran, K.I. Ramachandran
Publisher : Computers in Biology and Medicine
Year : 2025
Hot surface ignition of H2-air and CH4– H2-air mixtures for various equivalence ratios and heating Rates
Authors : Dr. Ratna Kishore V., Sudhi Shashidharan, Ratna Kishore Velamati, Sudarshan Kumar, Jithin Edacheri Veetil
Publisher : Elsevier BV
Year : 2024
Enhancement of Radiative Power Using a Divergent Splitter Plate Design in H2–Air Non-Premixed Micro-Combustor
Authors : Dr. Ratna Kishore V., Vinay Sankar, Sudipto Mukhopadhyay, Ratna Kishore Velamati
Publisher : ASME International
Year : 2024
Combustion of N-Decane+air Mixtures To Investigate Laminar Burning Velocity Measurements At Elevated Temperatures
Authors : Dr. Ratna Kishore V., Rohit Kumar, Sudarshan Kumar
Publisher : Informa UK Limited
Year : 2024
Microstructural Evolution and Anti-Corrosion Characteristics of As-Cast and LPBF Printed Inconel Plates in Seawater Environment
Authors : Dr. Radhika N., Jeyaprakash N.; Yang C.-H.; Karuppasamy S.S.
Publisher : World Scientific
Year : 2024
Electrochemical and hot corrosion behaviour of steel reinforced with AlSiBeTiV high entropy alloy using friction stir processing
Authors : Dr. Radhika N., Sundaram Ragunath, Sivanandam, Aravind Krishna, Natarajan Jeyaprakash
Publisher : Taylor and Francis Ltd.
Year : 2024
Influence of variable injection pressure and split injection on combustion and emission behavior of an engine with Diesel-Biodiesel blends
Authors : Senthilkumar D., Goutham Subramani, Sivanesan M., Srihari S.
Year : 2022
Investigation of Usage of Artificial Neural Network Algorithms for Prediction of In-Cylinder Pressure in Direct Injection Engines
Authors : Senthilkumar D., Sivanesan M., Srihari S.
Year : 2022
Effect of Grain Modifier on Mechanical and Tribological Properties of Al-Si Alloy and Composite
Authors : Dr. Radhika N., Sasikumar J, Jojith R
Publisher : Silicon
Year : 2021
Responsiveness model of the textile supply chain – a structural equation modelling-based investigation
Authors : Dr. Raghuram P., Dr. Saleeshya P. G., P. Raghuram; P.G. Saleeshya
Publisher : International Journal of Services and Operations Management
Year : 2021
Numerical solution of doubly singular boundary value problems by finite difference method
Authors : Dr. V. M. K. Prasad Goura, Pradip Roul
Publisher : Springer International Publishing
Year : 2020
Optimization of Cryogenic Turning Process Parameters Using Grey Relational Analysis (GRA) in Super-Duplex Stainless Steel (A479)
Authors : Dr. Sanjivi Arul, Akhil K.T., Shunmugesh K
Publisher : Recent Advances in Mechanical Engineering Springer
Year : 2020
Effect of Cryogenic Treatment on Mechanical Properties of Aluminium Alloy AA2014
Authors : Dr. Govindaraju M., Chaanthini, M.K., Arul, S.
Publisher : Journal of The Institution of Engineers (India)
Year : 2020
Development of tool condition monitoring system in end milling process using wavelet features and Hoelder’s exponent with machine learning algorithms
Authors : Dr. T. Mohanraj, Yerchuru, J., Krishnan, H., Nithin Aravind, R.S., Yameni, R.
Publisher : Measurement: Journal of the International Measurement Confederation
Year : 2020
Development of a supply chain risk mitigation index for distillery
Authors : Dr. Raghuram P., Sandeep.P., Sreedharan.V.R., Saikouk.T
Publisher : TQM Journal
Year : 2020
Application of artificial neural network techniques in computer aided process planning – A review
Authors : Dr. Gokulachandran J., Natarajan, K.K.
Publisher : International Journal of Process Management and Benchmarking
Year : 2020
An analysis of various factors influencing postharvest losses of the fruit and vegetable supply chain
Authors : Dr. Anbuudayasankar S. P., Narenthiran, N.; Prasanna, P.; Poongkundran, T.; ..; M S, Narassima; Aravind, P.
Publisher : Volume 7
Year : 2020
Modified friction stir clinching of 2024-T3 to 6061-T6 aluminium alloy: Effect of dwell time and precipitation-hardening heat treatment
Authors : Dr. R. Vaira Vignesh, Paidar, M., Tahani, K., Vaira Vignesh, R., Ojo, O.O., Ezatpour, H.R.
Publisher : Materials Science and Engineering
Year : 2020
Experimental and numerical analysis of soil-to-air heat exchanger system for domestic buildings
Authors : Dr. M. Ramu, Damodharan A., Ramu Murugan, Abuthakeer S
Publisher : Thermal Science
Year : 2020
Productivity improvement through lean initiatives: A service sector case study in India
Authors : Chandran, A., Saleeshya, P.G.
Publisher : International Journal of Business Innovation and Research
Year : 2020
Characterization and wear behaviour of WC-Co coated copper under dry sliding conditions
Authors : , Jojith R.,Vigneshwar Raj R.
Publisher : Tribology in Industry
Year : 2020
Wear and friction study of centrifugally cast functionally graded cu-ni-si alloy and composite
Publisher : Tribology in Industry
Year : 2020
A Numerical Investigation on Fluid Dynamics and Heating Characteristics of Co-and-Counterrotating Multiple Swirling Impinging Flames Arranged in 3×3 Inline Array
Authors : Dr. Ratna Kishore V., Parampreet Singh,Subhash Chander
Publisher : Journal of thermal science engineering application
Year : 2020
Microstructural, mechanical and tribological analysis of functionally graded copper composite
Authors : Dr. Radhika N., Sam M.
Publisher : International Journal of Cast Metals Research
Year : 2020
Design of combined cam and piercing progressive die set for a sheet metal component
Authors : Dr. M. Thenarasu, Rahul R.
Publisher : International Journal on Emerging Technologies
Year : 2020
Effect of T6 Treatment on Wear Behavior of Al-7Si/ ZrSiO4 Composites
Authors : Satish Kumar, S. Shalini, G. Suganya Priyadharshini
Publisher : Silicon
Year : 2020
Assembly line balancing and workstation design for a manufacturing industry
Authors : Dr. M. Thenarasu, Mazumder S, Padmanabhan S
Publisher : International Journal of Scientific and Technology Research
Year : 2020
Optimization of cutting parameters for mrr, tool wear and surface roughness characteristics in machining adc12 piston alloy using doe
Authors : Dr. Ilangovan S., Dr. Radhika N., Kumar H.D, Ilangovan S
Publisher : Tribology in Industry
Year : 2020
Effect of nanoparticles loading on free vibration response of epoxy and filament winding basalt/epoxy and E-glass/epoxy composite tubes: Experimental, analytical and numerical investigations
Authors : Dr. Ilangovan S., Ilangovan, S., Senthil Kumaran, S., Naresh, K.
Publisher : Materials Research Express
Year : 2020
Tool condition monitoring techniques in milling process-a review
Authors : Dr. T. Mohanraj, Dr. Shankar S., Dr. Sakthivel N. R., Mohanraj, T., Shankar, S., Rajasekar, R., Sakthivel, N.R., Pramanik, A.
Publisher : Journal of Materials Research and Technology
Year : 2020
Investigations on effect of split and retarded injection on the performance characteristics of engines with cashew nut shell biodiesel blend
Authors : Senthilkumar D., Late Dr. Thirumalini S. (Memorial Page), D.Senthilkumar, S.Thirumalini
Publisher : International Journal of Ambient Energy
Year : 2020
An experimental investigation on the enhanced thermal behavior of packed beds integrated with Al2O3 nanofluid
Authors : Dr. M. Ramu, Chidambara Raja S., Kumaraswamidhas L.A., Ramu M.
Publisher : Journal of Enhanced Heat Transfer
Year : 2020
Cloud-based technology for small and medium scale enterprises: A decision-making paradigm using IPA, AHP and fuzzy-AHP techniques
Authors : Prashant R. Nair, S.P. Anbuudayasankar; R. Srikanthan, M. Karthik; Prashant R. Nair; P. Indukumar
Publisher : International Journal of Integrated Supply Management
Year : 2020
Empirical Investigation of Supply Disruption in Plastic SMEs
Authors : Dr. Raghuram P., Dhianeshwar
Year : 2020
Agent_based modelling in Capacitated Lot Sizing Problem with Sequence dependent Setup time
Authors : Dr. Raghuram P., Sulaiman, S.
Year : 2020
Modeling and Assessment of the Impact of Supply Disruption and Cost of Recovery using Systems Dynamics Approach
Authors : Dr. Raghuram P., Harisankar, G
Year : 2020
Responsiveness Model of Textile Supply Chain – A Structural Equation Modeling based Investigation
Authors : Dr. Raghuram P., Saleeshya, P. G.
Year : 2020
Multi constraints applied energy efficient routing technique based on ant colony optimization used for disaster resilient location detection in mobile ad-hoc network
Authors : Dr. Karthick S., Dr. Prabhu E., A. Christy Jeba Malar; M. Kowsigan; N. Krishnamoorthy; K. Venkatachalam
Publisher : Journal of Ambient Intelligence and Humanized Computing
Year : 2020
Investigations on Effect of Split and Retarded Injection on the Performance Characteristics of Engines
Authors : Senthil Kumar, S. Thirumalini
Year : 2020
Warehouse optimisation using demand data analytics – a case study-based approach
Authors : Dr. Raghuram P., Singh, A.
Publisher : International Journal of Business Information Systems
Year : 2020
GRAHP TOP model for supplier selection in Supply Chain: A hybrid MCDM approach
Authors : Dr. Anbuudayasankar S. P., Venkata Krishnarao Koganti, Nagaraju Menikonda, T. Krishnaraj, Rajesh Kumar Athhukuri, and Mokkapati Sai Vastav
Publisher : Decision Science Letters
Year : 2019
Characterisation of aluminium alloy (Lm6) metal matrix composite reinforced with copper slag/ferro sand
Authors : Dr. Sanjivi Arul, Prabhakaran, A
Year : 2019
Astray state-laminar forced convective heat transfer of Al2O3 – H2O nanofluid through 3D-rectangular cross-sectional duct
Authors : Srinivaas A., Shiva Guru Prakash G.
Year : 2019
Optimizing the Financial Performance of Supply Chain- A Case Study
Authors : G.Saleeshya; Vinayak Rajan; Nijil Premkumar;G.Saleeshya
Publisher : International Journal of Advanced Operations Management
Year : 2019
Strengthening of Plain Concrete Cylinders with Natural FRP Composite Systems
Authors : Dr. Mini K. M., Mahadevan Lakshmanan, Dr. Jayanarayanan K., A. Padanattil
Publisher : Iranian Journal of Science and Technology, Transactions of Civil Engineering, Springer International Publishing
Year : 2019
Parametric study and optimization of linear and nonlinear vibration absorbers combined with piezoelectric energy harvester
Authors : Dr. Santhosh B., Raj, P.V.R.
Publisher : International Journal of Mechanical Sciences
Year : 2019
Mixing studies in turbulent oxy-methane jets with and without reaction
Authors : Dr. Srikrishnan A. R., Tamal, J., Deependran, B., Ajith Kumar R.
Publisher : Lecture Notes in Mechanical Engineering, Pleiades Publishing
Year : 2019
Investigations on microstructure, mechanical, and tribological behaviour of AA 7075–x wt.% TiC composites for aerospace applications
Authors : Ramkumar, K.R.; Sivasankaran, S.; Al-Mufadi, F.A.; Siddharth, S.; Raghu, R.
Publisher : Archives of Civil and Mechanical Engineering
Year : 2019
Improving Surface Hardness of EN31 Steel by Surface Hardening and Cryogenic Treatment
Authors : Dr. Sanjivi Arul, Chaanthini, M.K.;
Publisher : Journal of The Institution of Engineers (India): Series D
Year : 2019
EXPERIMENTAL STUDY of SURFACE ROUGHNESS and TAPER ANGLE in ABRASIVE WATER JET MACHINING of 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY
Publisher : Surface Review and Letters
Year : 2019
Planar equilibria of sessile and pendant liquid drops on geometrically non-linear elastic membranes
Authors : Dr. Vineet Nair, V. Nair, I. Sharma, and V. Shankar
Year : 2018
Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel 16MnCr5
Authors : Dr. Sanjivi Arul, Nandu Mohan.
Year : 2018
Effect of Cryogenic Treatment on the Mechanical Properties of Alloy Steel
Authors : Dr. Sanjivi Arul, Mohan, N.
Publisher : Materials Today: Proceedings.
Year : 2018
A novel Discrete PSO Algorithm for Solving Job Shop Scheduling Problem to Minimize Makespan
Authors : Dr. Ramesh Kumar K., Rajendran, C.
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing
Year : 2018
Synthesis and Characterization of Zircon/Graphite and Flyash/Graphite Reinforced Aluminium7075 Alloy: A Comparative Study
Authors : Dr. Ilangovan S., N. Balaje Krishna, and Parvathy Unnikrishnan
Publisher : Journal of Materials and Environmental Sciences
Year : 2018
Study of Mechanical and Wear Properties of Stir-Cast Al-Si-Cu alloy
Authors : Dr. Ilangovan S., Dileep Divakaran Namboodiri
Publisher : International Conference on Recent Research in Materails Engineering (International Journal of Engineering and Technology),
Year : 2018
Strengthening Steel Members with Holes Under Tension Using Unidirectional GFRP Sheets
Authors : Mahadevan Lakshmanan, Dr. Mini K. M., E. Parvathi
Publisher : International Journal of Steel Structures, Korean Society of Steel Construction,
Year : 2018
Strength Properties of Concrete Blocks with Sand Manufacture Sludge as Partial Replacement to Fine Aggregate
Authors : Dr. R. Ramkrishnan, Dr. Dhanya Sathyan, Kottukappalli, F.G.; Ramkrishnan R.; Dhanya Sathyan; Mini, K.M.; Basavarajappa S.; Nagaraja S.R.
Publisher : Materials Today: Proceedings
Year : 2018
Polyaniline/Fe3O4-RGO Nanocomposites for Microwave Absorption
Authors : Sabarish Narayanan B., Dr. Nikhil K. Kothurkar, J. Mathew, Sathishkumar, M., Kothurkar, N. K., and Senthilkumar, R.
Publisher : IOP Publishing
Year : 2018
Numeri cal Study on Thrust Generation in an Airfoil Undergoing Nonsinusoidal Plunging Motion
Authors : Dr. Ratna Kishore V., Srikumar G., Srikrishnan V.A., Purushothaman R.K., Thiagarajan V., Laxman Vaitla
Publisher : American Society of Civil Engineers (ASCE)
Year : 2018
Influence of Homogenization Temperature on Mechanical Properties from Outer to Inner Zone of Al–Cu–Si Alloy Castings
Authors : Dr. Sanjivi Arul, Dr. Ilangovan S., Naveen, E.
Publisher : Proceedings of the International conference on Engineering Materials, Metallurgy and Manufacturing (ICEMMM2018)
Year : 2018
A Finite Element Analysis of Dissimilar Materials Diffusion Bonded Joints
Authors : Unnikrishnan D., P. Deepak, V. M. Latheesh, A. Sumesh, and A. Santhakumari
Publisher : ICMMM2017
Year : 2018
An experimental investigation of Cu-Ni-Sn alloy on microstructure, hardness and wear parameters optimization using DOE
Authors : Dr. Ilangovan S., J. Sreejith, M. Manideep, and S. Harish
Publisher : Tribology in Industry
Year : 2018
Effect of Variation in Zinc Content and Ageing Treatment on Tribological Properties of Cast Aluminium-Zinc Alloys
Authors : Dr. Ilangovan S., Ilyas Hussain
Publisher : International Journal of Pure and Applied Mathematics
Year : 2018
Effect of surface modification using gtaw as heat source and cryogenic treatment on the surface hardness and its prediction using artificial neural network
Authors : Dr. Sanjivi Arul, Chaanthini M. K.
Publisher : Lecture Notes in Mechanical Engineering
Year : 2018
Analysis of three body abrasive wear behaviour of centrifugally cast aluminium composite reinforced with ni coated sic using taguchi technique
Authors : Dr. Radhika N.
Publisher : Tribology in Industry
Year : 2018
Effect of well Thermal Boundary Conditions on Flame Dynamics of CH4-Air Mixtures in Straight Microtubes
Authors : Dr. Ratna Kishore V., Aditya P Singh; V.; Y.Yoon; S.Minaev; Sudarshan Kumar
Publisher : International Journal of Combustion Science and Technology
Year : 2017
Novel adhesion promotion of aluminium for aerospace environments
Authors : Dr. Shantanu Bhowmik, Prakash, H.; Ajeesh, G.; Thenarasu, M.
Publisher : Surface Engineering and Applied Electrochemistry
Year : 2017
Delivery Service through an Integrated Inventory Management Model using a System Dynamics Model
Authors : Dr. Saleeshya P. G., Dr. Raghuram P., Mridula Sahay
Year : 2017
Synthesis and characterization of bagasse ash nanoparticles by sol-gel technique
Authors : Dr. T. Satish Kumar, Shalini, S., and R. Subramanian
Publisher : National Journal of Technology
Year : 2017
A Study on Chip Morphology of Aluminum Alloy 6063 during Turning under Pre Cooled Cryogenic and Dry Environments
Authors : Dr. Sanjivi Arul, Jenso Eapen; and Shanmugam Murugappan
Publisher : Materials Today: Proceedings
Year : 2017
Influence of Vegetable Based Cutting Fluids on Cutting Force and Vibration Signature During Milling of Aluminium Metal Matrix Composites
Authors : Dr. T. Mohanraj, Shankar, S., and Ponappa, K.
Publisher : Jurnal Tribologi
Year : 2017
Experimental Investigation and Process Parameter Optimization in Milling of 7075 – T6 Hybrid Aluminium Metal Matrix Composite using esponse Surface methodology
Authors : Dr. T. Mohanraj, Shankar, S.
Publisher : Journal of the Balkan Tribological Association
Year : 2017
Effect of Na doping on structure, morphology and properties of hydrothermally grown one dimensional TiO 2 nanorod structures
Authors : Dr. T. Satish Kumar, S. Shalini, Prabavathy, N., Balasundaraprabhu, R., Walke, P., Prasanna, S., and Velayuthapillai, D.
Publisher : Journal of Materials Science: Materials in Electronics
Year : 2017
Development of Cu-6Sn-5Ni-xTi and to analyse their mechanical and wear properties in as-cast condition
Authors : Dr. Karthik V. Shankar, Paul, C., & Sellamuthu, R.
Publisher : International Journal of Microstructure and Materials Properties
Year : 2017
Determination on the effect of tin content on microstructure, hardness, optimum aging temperature and aging time for spinodal bronze alloys cast in metal mold
Authors : Dr. Karthik V. Shankar, Dr. Sellamuthu R.
Publisher : International Journal of Metalcasting, American Foundry Society,
Year : 2017
Burning velocities of DME(dimethyl ether)-air premixed flames at elevated temperatures
Authors : Dr. Kumaresan S., Varghese, R.J.; Kishore, V.R.; Akram, M.; Yoon, Y.; Kumar, S.
Publisher : Energy
Year : 2017
Numerical Analysis of Effects of Turbine Blade Tip Shape on Secondary Losses
Authors : Dr. Srikrishnan A. R., Sarath, R. S., Ajith Kumar, R., Prasad, B.V.S.S.S.
Publisher : Fluid Mechanics and Fluid Power – Contemporary Research, Part of the Lecture Notes in Mechanical Engineering book series (LNME), Springer India
Year : 2017
A review on small scale wind turbines
Authors : Dr. Ratna Kishore V., Abhishiktha Tummala;.; Dipankur Kumar Sinha; V. Indraja; V. Hari Krishna
Publisher : Renewable and Sustainable Energy Reviews
Year : 2016
Study on the Influence of Relative Humidity on Pressure Drop Across Air Filter of Diesel Engine
Authors : Nanthakumar P., Padmakumar V
Publisher : IJAER , Volume 10, Issue 19 (2016)
Year : 2016
Investigations on flame dynamics of premixed H 2–air mixtures in microscale tubes
Authors : Dr. Ratna Kishore V., Aravind, B, Singh, Aditya P; Yoon, Y; Minaev, S; Kumar, Sudarshan
Publisher : RSC advances, Royal Society of Chemistry, Volume 6, Issue 55, p.50358–50367
Year : 2016
Numerical Simulation of Low Velocity Impact Analysis of Fiber Metal Laminates
Authors : Dr. Prakash Marimuthu K., Devarajan K., Kartik Balkumar, Abishek V. Iyer, Abishek Ramasubramanian
Publisher : Mechanics and Mechanical Engineering
Year : 2016
Smartphone-based fundus camera device (MII Ret Cam) and technique with ability to image peripheral retina.
Authors : Lakshmikanthan C., A. Sharma, Subramaniam, S. Devi, Dr. K. I. Ramachandran, Krishna, S., and Sundaramoorthy, S. K.
Publisher : Eur J Ophthalmol
Year : 2016
Process parameters effect on the strength of Friction Stir Spot Welded AA6061
Authors : Dr. Padmanaban R., Dr. R. Vaira Vignesh, Arivarasu, M,Karthick, K.P, Abirama Sundar, A.
Publisher : ARPN Journal of Engineering and Applied Sciences, Asian Research Publishing Network
Year : 2016
Privilege-based scoring system against cross-site scripting using machine learning
Authors : Dr. Gireeshkumar T., Sunder, N.S.;
Publisher : Advances in Intelligent Systems and Computing
Year : 2016
Power generation by high head water in a building using micro hydro turbine-a greener approach.
Authors : Dr. Anbuudayasankar S. P., Dr. Balaji K., B. M. M. S. R. S., V., R. Kishore, and Dr. Anbuudayasankar S. P.
Publisher : Environmental Science and Pollution Research
Year : 2016
Performance comparison for aluminium, copper and steel shots in waste heat recovery and scrap preheating from solidifying molten metal
Authors : Dr. M. Thenarasu, Mathew, M.M.;; Aravind, G.; Selvaraj, J.
Publisher : ARPN Journal of Engineering and Applied Sciences
Year : 2016
Novel Lightning Strike Protected Polymeric Composite for Future Generation Aviation
Authors : Dr. Shantanu Bhowmik, S S. Sharma; A.Nivetha, A; Maalavan, K.; Siva Subramanian, S.; Sree Kumar,; P Mohan; S. Ramanathan; R. Rane; S. Mukherjee
Publisher : Journal of Aerospace Engineering
Year : 2016
Novel Adhesion Promotion of Aluminium for Aviation Environments
Authors : Dr. Shantanu Bhowmik, H. Prakash, G. Ajeesh, and Thenarasu, M
Publisher : Journal of Surface Engineering and Applied Electrochemistry
Year : 2016
Measurement of the variation of mechanical properties with aging temperatures for sand cast Cu-5Ni-5Sn alloy
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : Journal of Engineering Science and Technology
Year : 2016
An investigation on the benefits of ICT deployment in Supply Chain Management (SCM)
Authors : Prashant R. Nair, Dr. Anbuudayasankar S. P.
Publisher : Indian Journal of Science and Technology, Indian Society for Education and Environment.
Year : 2016
Influence of Specimen Temperature on Wear Characteristics of AA6063 Aluminium Alloy
Authors : Dr. Ilangovan S., A. Shanmugasundaram, Dr. Sanjivi Arul
Publisher : Journal of Surface Science and Technology
Year : 2016
Influence of fluctuating wind conditions on vertical axis wind turbine using a three dimensional CFD model
Authors : Dr. Ratna Kishore V., Dr. Laxman Vaitla, Bhargav M.M.S.R.S.
Publisher : Journal of Wind Engineering and Industrial Aerodynamics.
Year : 2016
Experimental Investigation on Mechanical, Tribological and Machining Behavior of (Cu-10Zn)100-x – x wt.% Al2O3 Nanocomposite Prepared by Mechanical Alloying and Hot-Pressing
Authors : Dr. Ilangovan S., K. R. Ramkumar, S .Sivasankaran, and Abdulaziz S Alaboodi
Publisher : Journal of Materials and Design
Year : 2016
Empirical Correlation of the Primary Stability Variable of Liquid Jet and Liquid Sheet under Acoustic Field
Authors : Dr. Balaji K., Sampathkumar M.C., Hassan M.M.d, Karthik K.M.e, Saidileep K.b
Publisher : Journal of Fluids Engineering, Transactions of the ASME, American Society of Mechanical Engineers (ASME)
Year : 2016
Emission Characteristics of Turbocharged Single Cylinder Diesel Engine
Authors : Senthilkumar D., V. R. Varthan
Publisher : Indian Journal of Science and Technology
Year : 2016
Effect of heat treatment on the wear behaviour of functionally graded LM13/B4C composite
Authors : Dr. Radhika N., Priyanka Muddamsetty, L.V.;
Publisher : Tribology in Industry, Masinski Fakultet – Kragujevac
Year : 2016
Effect OF CO2/N2 dilution on laminar burning velocity of liquid petroleum gas-air mixtures at elevated temperatures
Authors : Dr. Ratna Kishore V., Nair, A.;; Kumar, S.
Publisher : Energy, Elsevier Ltd
Year : 2016
Discontinuity induced bifurcations in nonlinear systems
Authors : Dr. Santhosh B., ., S Narayanan, and C Padmanabhan
Publisher : Procedia IUTAM,
Year : 2016
Development of lightweight high-performance polymeric composites with functionalized nanotubes
Authors : Dr. Shantanu Bhowmik, Arun A, Vijayan, V.J.; M. Abraham; Ajeesh, G.; Pitchan M. K.
Publisher : Journal of Applied Polymer Science, John Wiley and Sons Inc
Year : 2016
Comparison of the mechanical and wear behaviour of aluminium alloy with homogeneous and functionally graded silicon nitride composites
Authors : Dr. Radhika N.
Publisher : Science and Engineering of Composite Materials.
Year : 2016
Comparative Study of Conventional and Rapid Prototyping Technique for the Fabrication of Porous Scaffold for Tissue Engineering Applications
Authors : Dr. M. Ramu, Kumaresan T., Gandhinathan R, Ananthasubramanian M, and Banu Pradheepa K
Publisher : Biomedicine
Year : 2016
Characterisation of tensile strength and impact toughness of autogeneous PCGTA weldments of aeronautical steel and austenitic stainless steel
Authors : M Arivarasu; Devendranath Ramkumar K; Arivazhagan. N
Publisher : Kovave Materialy – Metallic Materials Article in press
Year : 2016
Assessing the responsiveness of supply chain -structural equation modelling based approach
Authors : Dr. Saleeshya P. G., Dr. Raghuram P.
Publisher : International Journal of Logistics Systems and Management, Inderscience Enterprises Ltd.
Year : 2016
Characterization of hybrid black toner using the parameters waste toner and Nano phase carbon
Authors : Dr. R. Vaira Vignesh, C. Krishnaraj
Publisher : ARPN Journal of Engineering and Applied Sciences
Year : 2015
Optimization of Hybrid Black Toner Synthesis from Waste Toner
Authors : Dr. R. Vaira Vignesh
Publisher : International Journal of Innovative Research in Science, Engineering and Technology
Year : 2015
Single Variable Algorithm Optimized Hybrid Black Toner Synthesis from Waste Toner and Nano Phase Carbon
Authors : Dr. R. Vaira Vignesh
Publisher : Karpagam Journal of Engineering Research
Year : 2015
Experimental Investigation of Evaporative Emission with Variation in Material Characterestic and Fuel Levels
Authors : S, S.Thirumalini
Year : 2015
Variants, meta-heuristic solution approaches and applications for image retrieval in business-comprehensive review and framework
Authors : Dr. Anbuudayasankar S. P., S. Umamaheswaran, K. Ganesh, N. Kumar, S., and Sethupathi, P. V. Rajendra
Publisher : International Journal of Business Information Systems
Year : 2015
Study on Effects of Magnetization of Fuel on Diesel Engine
Authors : Senthilkumar D., N. Tom Varghese, and Vivek, M
Publisher : International Journal of Applied Engineering Research
Year : 2015
A study on effect of sub zero temperature cooling on surface roughness of turned EN8 steel rod
Authors : Dr. Sanjivi Arul, S. Murugappan
Publisher : International Journal of Applied Engineering Research
Year : 2015
Study of microstructure, hardness and wear properties of sand cast Cu-4Ni-6Sn Bronze alloy
Authors : Dr. Ilangovan S.
Publisher : Journal of Engineering Science and Technology
Year : 2015
Remaining life assessment of boiler components
Authors : Dr. Raghuram P., Hemanath, S.; Hiran, S.H.; Vignesh, M.; Ranjith, S.
Publisher : International Journal of Applied Engineering Research
Year : 2015
Optimization of Machining Parameters In Turning Process Using Exergy Analysis
Authors : Dr. Raghuram P., K. Balaji; Karthik S; Hari Haran R; Siva Sankar P; Vimal P
Publisher : International Journal of Applied Engineering Research
Year : 2015
Optimization and scheduling of HAZCHEM logistics with time windows : A case study
Authors : Sarath S., Dr. Raghuram P., Venkateswaran, R.
Publisher : International Journal of Applied Engineering Research
Year : 2015
Effect of variation in Al/Si content on mechanical properties of Zn-Al-Si alloys
Authors : Dr. Ilangovan S., Dr. Sanjivi Arul, A. Shanmugasundaram, S. R. Kasthuri Raj
Publisher : International Journal of Applied Engineering Research
Year : 2015
Effect of shallow cryogenic treatment on mechanical properties of AISI 1018 steel
Authors : Dr. Sanjivi Arul, T. S. V. Dheemanth, Rahul, K., Suman, N., and Devanathan, R.
Publisher : International Journal of Applied Engineering Research
Year : 2015
Effect of iron oxide nanoparticle in bio digestion of a portable food-waste digester
Authors : Dr. Sreekanth K. M., Dr. Debjyoti Sahu
Publisher : Journal of Chemical and Pharmaceutical Research
Year : 2015
Discontinuity induced bifurcations in Nonlinear Systems.
Authors : Dr. Santhosh B., S Narayanan, and C Padmanabhan
Publisher : IUTAM Symposium on Analytical Methods in Nonlinear Dynamics
Year : 2015
Criticality Analysis and Inventory Cost Reduction for High-Value, High Volume Spares
Authors : Dr. Raghuram P., Sonujalam .K
Publisher : International Journal of Applied Engineering Research
Year : 2015
Synthesis of Hybrid Black Toner from Waste Toner Using Nano Technology–Optimization Technique
Authors : Dr. R. Vaira Vignesh
Publisher : International Journal of Engineering and Technology
Year : 2014
A Study on the Effect of Processing Parameters on the Quality of Parts made by Low Cost 3D Printer (submitted for publication)
Authors : Prof. Sriram Devanathan, Elangovan, M., and Aditya, T. N
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
Study of Effect of Cooling Rate on Mechanical and Tribological Properties of Cast Al-6.5Cu Aluminium Alloy
Authors : Dr. Ilangovan S., Viswanathan Saikrishna, and K. Gopinath Niranthar
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
Raw Material Preheating by a Novel Energy Recycling Method in Metal Casting, with the Application of Design of Experiments and Regression Analysis (Accepted)
Authors : Prof. Sriram Devanathan, J., S., K., P. Marimuthu, and I., R. K
Publisher : Journal of Cleaner Production
Year : 2014
Measurement of hardness, wear rate and coefficient of friction of surface refined Al-Cu alloy
Authors : Dr. Sanjivi Arul, V. Gopi, and R. Sellamuthu
Publisher : Procedia Engineering
Year : 2014
Investigation on the effect on the SiC reinforced aluminum metal matrix composites
Authors : Dr. Ilangovan S., Rameshkumar K A, Balamurugan K, and Gnanaraj D
Publisher : Advanced Composites Letters
Year : 2014
Investigation of the Mechanical, Corrosion Properties and Wear Behaviour of Electroless Ni-P plated Mild Steel
Authors : Dr. Ilangovan S.
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
Improving Surface Hardness of Mild Steel Plates by Addition of Silicon Carbide Using Gas Tungsten Arc as Heat Source
Authors : Dr. Sanjivi Arul, H. G Reddy, and Sellamuthu, R.
Publisher : Applied Mechanics and Materials
Year : 2014
Heat transfer modelling and investigation of the effect of pulse frequency and current in pulsed current gas tungsten arc welding
Authors : Dr. Sanjivi Arul, A. Prabakaran, and R. Sellamuthu
Publisher : Applied Mechanics and Materials
Year : 2014
Evolving cost-effective routing of vehicles for blood bank logistics
Authors : Dr. Anbuudayasankar S. P., K. Ganesha, T. T. Narendran.
Publisher : International Journal of Logistics Systems and Management
Year : 2014
Effects of Solidification Time on Mechanical Properties and Wear Behaviour of Sand Cast Aluminium Alloy
Authors : Dr. Ilangovan S.
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
Effects of Aging Time on Mechanical Properties of Sand Cast Al-4.5Cu Alloy
Authors : Dr. Ilangovan S., Srikanthan R., and Veda Vyass G.
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
The effect of section size on cooling rate, microstructure and mechanical properties of A356 aluminium alloy in casting
Authors : Dr. Sanjivi Arul, K. T. Akhil, and Sellamuthu, R.
Publisher : Procedia Materials Science
Year : 2014
The Effect of Heat Treatment and Aging Process on Microstructure and Mechanical Properties of A356 Aluminium Alloy Sections in Casting
Authors : Dr. Sanjivi Arul, A. M. Xavior, Yarlagadda, P. K. D. V., Akhil, K. T., and R. Sellamuthu
Publisher : Procedia Engineering
Year : 2014
Effect of electrode diameter and input current on gas tungsten arc welding heat distribution parameters
Authors : Dr. Sanjivi Arul, R. B Chandra, and Sellamuthu, R
Publisher : Procedia Materials Science
Year : 2014
Dynamic control of a pulsatile jet propelled aquatic robot
Authors : Dr. Sanjivi Arul, R. Radhika, Gupta, S. K., and Rammohan, N.
Publisher : Applied Mechanics and Materials
Year : 2014
Dry Sliding Wear Behaviour of Sand Cast Cu-11Ni-6Sn Alloy
Authors : Dr. Ilangovan S., Jiten S.
Publisher : International Journal of Research in Engineering and Technology
Year : 2014
Development Of Automated Aerial Pesticide Sprayer
Authors : Dr. Sanjivi Arul, P. D. P. R. Ha Vardhan, .Dheepak, S., and .T.Aditya3, P.
Publisher : IJRET: International Journal of Research in Engineering and Technology
Year : 2014
Determination of melting efficiency of mild steel in GTA welding process
Authors : Dr. Sanjivi Arul, G. S. Kumar, and R. Sellamuthu
Publisher : Applied Mechanics and Materials
Year : 2014
Modelling of Homogeneous Mixture Formation and combustion in GDI Engine with Negative Valve Overlap
Authors : K.Lalith; Akilradhakrishnan; S.Srihari; V.Rathnakishore; Akshay Dinesh; S.Unnikrishnan
Publisher : ISRN Mechanical Engineering
Year : 2013
Synthesis of Hybrid Black Toner from Waste Toner using Nano Technology – Optimization Technique – Phase 2
Authors : Dr. R. Vaira Vignesh
Publisher : Journal of Material Science Engineering in association with the 2nd International Conference and Exhibition on Materials Science and Engineering
Year : 2013
Determination of Surgical Spot Coordinates from CT Scan Images of Brain to Position the Stereotactic Neurosurgical Manipulator
Authors : Dr. Sanjivi Arul, Vysakh V
Year : 2013
A study on the effect of SiC reinforcement on the surface and tribological behavior on Al-Metal Matrix Composites
Authors : Dr. Ilangovan S.
Publisher : Applied Mechanics and Materials
Year : 2013
REFING: Heuristic to solve bi-objective resource allocation problem with bound and varying capacity
Authors : Dr. Anbuudayasankar S. P.
Publisher : International Journal of Operational Research
Year : 2013
Non-linear 3D Finite Element Analysis of the Femur Bone
Authors : Dr. Sivakumar V., U. N. Asish Ramesh
Publisher : International Journal of Research in Engineering and Technology (IJRET)
Year : 2013
Effects of tin on hardness, wear rate and coefficient of friction of cast Cu-Ni-Sn alloys
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : Journal of Engineering Science and Technology
Year : 2013
Development of a regression model relating experimentally measured arc parameters and gas tungsten arc welding process variables
Authors : Dr. Sanjivi Arul, R. Sellamuthu
Publisher : International Journal of Computational Materials Science and Surface Engineering
Year : 2013
Comparative studies on GTA and PCGTA weldments of AISI 4140 and AISI 316 dissimilar metals
Authors : Dr. Narayanan
Publisher : International Journal of Microstructure and Materials Properties
Year : 2013
Influence of process parameters on wear behaviour of hybrid aluminium composites
Authors : Dr. Radhika N.
Publisher : International Journal of Operations Systems and Human Resource Management
Year : 2013
A Combined AHP and ISM–based Model to Assess the Agility of Supply Chain-A Case Study
Authors : PG Saleeshya, KS Thampi
Publisher : International Journal of Integrated Supply Management
Year : 2012
Safe, Sustainable and Smart Charging of Plug in Hybrid Electric Vehicles (PHEVs)
Authors : Late Dr. Thirumalini S. (Memorial Page), Ajaykrishna Ramasubramanian; S. Thirumalini; Vishnu Padmanaban; Manikandaraj Srinivasan
Publisher : World Academy of Science, Engineering and Technology
Year : 2012
Investigations on micro-blast wave assisted metal foil forming for biomedical applications
Authors : Dr. Nagaraja S. R., S.R.Nagaraja, S.G.Rakesh, J.K.Prasad, P.K.Barhai, G.Jagadeesh
Publisher : International Journal of Mechanical Sciences
Year : 2012
An investigation of the effect of Ni content and hardness on the wear behaviour of sand cast Cu-Ni-Sn alloys
Authors : Dr. Ilangovan S., R. Sellamuthu
Publisher : International Journal of Microstructure and Materials Properties
Year : 2012
Heuristic approach for balanced allocation problem in logistics: A comparative study
Authors : Dr. Anbuudayasankar S. P., Sivakumar, P.a; K. Ganesh; Punniyamoorthy, M.d; Lenny Koh, S.C.e
Publisher : International Journal of Operational Research
Year : 2012
FEM Analysis of Efect of Rolling Parameters on cold rolling process
Authors : Dr. Ajith Ramesh, Dr. Prakash Marimuthu K.
Publisher : Bonfring International journal of industrial Engineering and Management
Year : 2012
A combined AHP and ISM-based model to assess the agility of supply chain–a case study
Authors : Dr. Saleeshya P. G., Dr. Raghuram P., Thampi, Karthik Suresh
Publisher : Inderscience Publishers
Year : 2012
Assessment on the adoption of low carbon and green supply chain management practices in Indian supply chain sectors – manufacturing and service industries
Authors : Dr. Anbuudayasankar S. P., Lenny Koh, S.C.; Ganesh, K.; Nandakumar Chidambaram
Publisher : International Journal of Business and Globalisation
Year : 2012
Application of Stand Alone System and hybrid System for Fault Diagnosis of Centrifugal Pump using time domain features and Statistical Features
Authors : Dr. Sakthivel N. R., Dr. Binoy B. Nair, Roy R.S; Sugumaran V
Publisher : International Journal of Data Mining,Modelling and Management
Year : 2012
Neighborhood search assisted particle swarm optimization (NPSO) algorithm for partitional data clustering problems
Authors : Dr. R. Karthi, Dr. Ramesh Kumar K., Rajendran, Cb
Publisher : Communications in Computer and Information Science
Year : 2011
Application of a simplified simulation method to the determination of arc efficiency of gas tungsten arc welding (GTAW) and experimental validation
Authors : Dr. Sanjivi Arul, R. Sellamuthu
Publisher : International Journal of Computational Materials Science and Surface Engineering
Year : 2011
Studies on Mechanical Behavior of Al/Ni Coated silicon Carbide Reinforced Functionally Graded Composite
Authors : Dr. Radhika N., Mohandas;
Publisher : Tribology in Industry
Year : 2010
Design Optimization of Complex Structures using Metamodels
Authors : Dr. M. Ramu, V Prabhu Raja, P. R. Thyla, and Gunaseelan. M
Publisher : Jordan Journal of Mechanical and Industrial Engineering
Year : 2010
Clustering-based heuristic for the workload balancing problem in enterprise logistics
Authors : Dr. Anbuudayasankar S. P., Ganesh, K., S. C. Lenny Koh, and Mohandas K.
Publisher : International Journal of Value Chain Management
Year : 2009
A Methodology for Reducing Quality Loss and Rework in a Three-part Selective Assembly-A Case Study
Authors : Dr. Sanjivi Arul, G. K., and P.V., M.
Publisher : International Journal on Advanced Manufacturing System
Year : 2007
Optimum Scheduling/Cost Control Using Network Analysis
Authors : Dr. Gokulachandran J., Dr. Raghuram P.
Publisher : Journal of Industrial Engineering
Year : 2006
Ultrasonics in the construction of mobility aid for the blind
Authors : Dr. Raghuram P.
Publisher : Kumaraguru College of Technology
Year : 2005
Determination of weld process parameters for precisional welding: A DOE & FEA Approach
Authors : Dr. Radhika N., PSS. Srinivasan; K. Suresh Kumar; M. Joseph Davidson
Publisher : National Journal of “Manufacturing Technology Today
Year : 2005