Viscosity and Tribological Characteristics of Sunflower Oil with ZnO as Additive
Authors : Dr. Akhil V. M., Ravikiran, K. R. Prakash, Prashanth, H. Poornananda, S. L. Aravind
The Effect of Impact on the Knee Joint Due to the Shocks during Double Impact Phase of Gait Cycle
Authors : Dr. Akhil V. M., Jobin Varghese, P. K. Rajendrakumar, K. S. Sivanandan
Human Gait Recognition Using Hip, Knee and Ankle Joint Ratios
Authors : Dr. Akhil V. M., M. Ashmi, P.K. Rajendrakumar, K.S. Sivanandan
Estimation of knee joint torque during sit–stand movement based on sEMG signals using Neural networks
Authors : Dr. Akhil V. M., M. ASHMI, V. JOBIN, P. K. RAJENDRAKUMAR, K. S. SIVANANDAN
Cross Recurrence Plots as a Tool for Non Linear Data Analysis
Authors : Dr. Chinmaya Krishnan G.
Publisher : International Research Journal of Engineering and Technology (IRJET)
Failure of ISO9001 Quality Management Systems in Pharmaceutical Companies – A survey based study
Authors : Dr. Chinmaya Krishnan G., Arathy Krishnan
Publisher : International Journal of Research in Mechanical Engineering
Zero defect management–a study on the relevance in modern days
Authors : Dr. Chinmaya Krishnan G.
Publisher : Int. Res. J. Eng. Technology
Strain sensing and characterization of CNFs wrapped with polyaniline/polypyrrole based polyester composites
Authors : Dr. Ravi Kumar V., Prakash K. R.; Nithin K.S.
Publisher : Mechanical and Production Engineering Research and Development
Performance Analysis of a Diesel Engine Fuelled with Blends of Neem and Simarouba Oils
Authors : Vinod Kotebavi, M. Sunil Kumar
Publisher : Indian Journal of Science and Technology
Design and Fabrication of an Automated Low-Cost Sterilization and Packing Unit for Making Sanitary Pad
Authors : Rajesh R, Akshay M. Nair; Nirmal Mohanan; G.S. Sachin; Shubham Kumar; Syam S. Ramesh; N. Rakesh; S.R. Sreerag
Publisher : Materials Today: Proceedings
Design and Fabrication of Pulverising Unit for Maximum Absorptivity of Raw Banana Fiber
Authors : Rajesh R, Soumithri Sreekumar; Anoop Murali; A Aravind Vasudevaru; Amal Rajendran; Rajesh Raveendran; N Rakesh; S R Sreerag
Publisher : IOP Conference Series: Materials Science and Engineering
Portable and efficient graphene-oxide based multistage filtration unit for water purification
Authors : Dr. Geena Prasad, Rajesh R, Akshay P.; Shreekanth S.;
Publisher : Materials Today: Proceedings, 10th International Conference on Materials Manufacturing and Characterization
Design of fault detection system for automobile power train using digital signal processing and soft computing techniques
Authors : Dr. Karthik V. Shankar, Kailasnath, K.,Devasenapati, S. B.
Publisher : IGI Global, International Journal of Manufacturing, Materials, and Mechanical Engineering
A study on the effect of tin addition on wear and mechanical properties of spinodal alloys cast in metal mould
Authors : Dr. Karthik V. Shankar, Dr. Sellamuthu R.
Publisher : Inderscience , International Journal of Microstructure and Materials Properties
Determination on the effect of ti addition on the microstructural, mechanical and wear behavior of Cu–6Sn alloy in as—Cast condition
Authors : Dr. Karthik V. Shankar, Dr. Balakrishnan Shankar, Akshay, M. C., Aravind Senan, V. R., Vignesh Surej, K. S., Akhil, B
Publisher : Springer, Transactions of the Indian Institute of Metals
Investigating the significance of SiC particle size on the mechanical properties of cu-6Sn-SiC composite
Authors : Dr. Karthik V. Shankar, Ajay Ghosh, K. J., Sudhin, C. B., Pai, A. S., Biju, A., & Sriram, K. R.
Publisher : Inderscience , International Journal of Materials Engineering Innovation
Investigation of SiC particle size variation on the tribological properties of cu-6Sn-SiC composite
Authors : Dr. Karthik V. Shankar, Chandroth, A. M., Ghosh, K. J. A., Sudhin, C. B., Pai, A. S., Biju, A., & Sriram, K. R.
Publisher : Archives of Foundry Engineering
Investigations on the melt flow behavior and microstructure of A390 alloy during vertical centrifugal casting process: CFD simulation and experiments
Authors : Dr. Karthik V. Shankar, Karun, A. S., Kumar, J. A., Jeyalakshmi, T. S., Krishna, B. S. G., Suraj, K. S. V., Rajan T.P.D , Savithri, S.
Publisher : Springer, Transactions of the Indian Institute of Metals
Strontium in Al–Si–Mg alloy: A review.
Authors : Dr. Karthik V. Shankar, Ganesh, M. R. S., Reghunath, N., J.Levin, M., Prasad, A., Doondi, S.
Publisher : Springer, Metals and Materials International
Influence of solutionising time on the dendrite morphology and mechanical behaviour of al-si-mg-ni hypoeutectic alloy
Authors : Dr. Karthik V. Shankar, Eby, F. J., Narayanan, S. A., Abhiram, R., Navaneeth, M. V., Manu, K., & Nidhin, A. R.
Publisher : Springer, Silicon
Solutionising temperature influence on the morphological and mechanical characteristics of Al–Si–Mg–Ni hypoeutectic alloys
Authors : Dr. Karthik V. Shankar, Manu, K., Raj, A. N., Mukund, A., Nair, A. S., Nived, S., & Premkumar, A.
Publisher : Springer, Journal of the Institution of Engineers (India): Series D
Morphological and mechanical behaviour of Cu–Sn Alloys—A review
Authors : Dr. Karthik V. Shankar, Karthik, M., Abhinav, J.
Publisher : Springer, Metals and Materials International
Titanium in cast cu-sn alloys—a review
Authors : Dr. Karthik V. Shankar, Manu, K., Jezierski, J., Ganesh, M. R. S., & Narayanan, S. A.
Publisher : MDPI, Materials
Influence of T6 heat treatment analysis on the tribological behaviour of cast al-12.2Si-0.3 Mg-0.2Sr alloy using response surface methodology
Authors : Dr. Karthik V. Shankar, Dr. Meera Balachandran, Pillai, B. S., Krishnanunni, S. R., Harikrishnan, N. S., Harinarayanan, A. R., & Kumar, V. S.
Publisher : Springer, Journal of Bio- and Tribo-Corrosion
Antiviral properties of copper and its alloys to inactivate covid-19 virus: A review
Authors : Dr. Karthik V. Shankar, Dr. Balakrishnan Shankar, Rajesh R., Govind, V., Bharadwaj, S., Sai Ganesh, M. R., Vishnu, J.
Publisher : Springer, BioMetals
Impact of Heat Treatment Analysis on the Wear Behaviour of Al-14.2Si-0.3Mg-TiC Composite using Response Surface Methodology
Authors : Dr. Karthik V. Shankar, Dr. Meera Balachandran, V. Anilkumar , J. Joseph , S. Nived , J. Jayanandan , J. Jayagopan , U.S. Surya Balaji
Publisher : Tribology in Industry
Study on conventional and microwave assisted sintering of Cu-FA composites
Authors : Dr. Balakrishnan Shankar, Rajesh R, J. Harikrishnan; Ajay Ritwik; A. Hari Krishna; Q. Usman; R. Hari Sankar
Publisher : Materials Today: Proceedings
Mechanical Behavior of Silicon Carbide filled SBR/NBR Blends
Authors : Rahulan N., K. Akshay; M. Arjun; S. Sai Govind; V. Hrithwik; S. Akhil
Publisher : Materials Today: Proceedings
Effect of Silicon Nitride on Physical Properties of SBR
Authors : Dr. Sundararaman Gopalan, Rahulan N., Anirudh Mohan T P; R. Harikrishnan;
Publisher : Materials Today: Proceedings
Effect of Speed and Feed Rate on Dry and Wet Turning of Aluminum
Authors : Rahulan N., K. M. Vinay Sankar; S. Sooraj; S. A. Sreehari; P. Yaduraj
Publisher : AIP Conference Proceedings 2259, 020016 (2020)
Tensile and Tear Properties of Boron Carbide Filled SBR/NBR Blends
Authors : Rahulan N., R. Sivaprasad; V. R. Anandu; D. Vishnu Dhidev; S. Nair Kailas;
Publisher : AIP Conference Proceedings
Effect of Boron Carbide on Physical Properties of Styrene Butadiene Rubber
Authors : Rahulan N., Abhishek Remesh ; G. Abhijith; P. Adwaith; S. Adithyan; Sudararaman Gopalan
Publisher : Materials Today: Proceedings
Nondestructive testing for surface micro defects using bacteria
Authors : Sambhu R., Krishnan, A.; Nampoothiri, R.; Reghunandanan, R.
Static and Dynamic Analysis of Undercarriage of Underwater Mining Machine Using Composite Material
Authors : Sambhu R., V. Vipin; Deepak C Raphel
Publisher : Materials Today: Proceedings,
A Study on the Effect of Co Addition on the Microstructure and Mechanical properties of A356 Alloy Cast in Permanent Mould
Authors : Sambhu R., Dr. Karthik V. Shankar, E.P. Sreedev
Publisher : Materials Today: Proceedings
Ayurvedic clinical profile of COVID-19–A preliminary report
Authors : Dr. P. Rammanohar, Kataria, Sushila; Unnikrishnan, Pm; Prasad, M.; Nampoothiri, Vasudevan; Sharma, Pooja; Singh, Manish Kumar; Kumar, Kuldeep; Trehan, Naresh
Publisher : Elsevier
Robust multidirectional smoothing of isoclinic parameter in digital photoelasticity
Authors : Dr. Hariprasad M. P., Ramesh Krishnamurthi, Vivek Ramakrishnan
Publisher : Optical Engineering
Digital photoelastic analysis applied to implant dentistry
Authors : Dr. Hariprasad M. P., Ramesh K.; Bhuvaneswari Shanmugam
Publisher : Digital optical & Imaging methods in structural mechanics
Evaluation of Hertzian contact parameters from whole field displacement data
Authors : Dr. Hariprasad M. P., Ramesh K.
Publisher : The Journal of Strain Analysis for Engineering Design
Influence of slip on flow past cylinder at low Reynolds number
Authors : Dr. Ajith Kumar S., S. Anil Lal, and A. Sameen
Publisher : Proc. IUTAM Symposium on Bluff Body Wakes
Influence of Extending the Height on the Vortex Structures Generated Inside A Lid Driven Cavity
Authors : Dr. Ajith Kumar S., Sourav N. Kumar; H. Akhilesh Vishnu
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing,
Effects of Prandtl number on the laminar cross flow past a heated cylinder
Authors : Dr. Ajith Kumar S., Manikandan Mathur; A. Sameen; S. Anil Lal
Publisher : Physics of Fluids,
Flow past a moderately heated horizontal cylinder at low Reynolds number
Authors : Dr. Ajith Kumar S., S. Anil Lal; A. Sameen
Publisher : Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, Volume 230, Issue 7, p.1224-1239 (2016)
Effect of Prandtl number on Heat Transfer In Flow Past A heated cylinder
Authors : Dr. Ajith Kumar S., A. Sameen; S. Anil Lal
Publisher : International Journal of Innovative Research in Science, Engineering and Technology
Study on PV Thermal Integrated systems for Rooftop Applications
Authors : Dr. Hariprasad M. P., Harsh Mohan; G. Manoj Reddy, Dr. Vinod Kumar Gopal
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing,
Numerical study of heat transfer enhancement in fin and tube heat exchangers using curved semi wavy vortex generators
Authors : Ebin P. S., Harikrishnan G.
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing
Solar powered desktop CNC machine for fabric and paper cutting
Authors : Sarun P. Pillai; B. R. Abhiram; Akshay S. Kumar; U. S. Ashish;
Publisher : IOP Conference Series: Materials Science and Engineering,
Design and Fabrication of a Novel Anthropomorphic Hand for Prosthetic Application
Authors : Dr. Ganesha Udupa, Dr. Pramod Sreedharan, Aravind Krishnan
Publisher : Journal of Medical Devices
Design and Development of Mobile Operated Control System for Humanoid Robot
Authors : Dr. Ganesha Udupa
Publisher : International journal of Advances in Computing
Innovative Anti-Bourdon tube pressure gauge for manufacturing industries (Received the Award of Rs. 15,000/- cash prize)
Authors : Dr. Ganesha Udupa, Mata Amritanandamayi Devi, Pramod Sreedharan
Publisher : International Machine tool Exhibition (IMTEX forming Tool tech 2014)
Effect of Dissimilar Leading Edges on the Flow Structures Around a Square Cylinder
Authors : Arunkumar K., Dr. Ajith Kumar R.
Publisher : ASME 2014 Pressure Vessels and Piping Conference
Asymmetric bellow flexible pneumatic actuator for miniature robotic soft gripper
Authors : Dr. Ganesha Udupa, Dr. Pramod Sreedharan, Dinesh Parvathaneni, Doik Kim
Publisher : International Journal of Robotics
Quality assessment of drilled holes in Al 6063 plate at sub zero temperature
Authors : Dr. Sanjivi Arul, S. Murugappan, and Narayanan, S. K.
Publisher : International Journal of Applied Engineering Research
A PIV study of the near wake flow features of a square cylinder: influence of corner radius
Authors : Dr. Ajith Kumar R., Sohn, C.H. , Gowda, B.H.L.
Publisher : Journal of Mechanical Science and Technology
An Experimental Study on Turning of AL6063 under Cryogenic Pre Cooled Condition
Authors : Dr. Sanjivi Arul, S. Murugappan, and Narayanan, S. K.
Publisher : Procedia CIRP
Discontinuity induced bifurcations in Nonlinear Systems.
Authors : Dr. Santhosh B., S Narayanan, and C Padmanabhan
Publisher : IUTAM Symposium on Analytical Methods in Nonlinear Dynamics
Design of Spider Mechanism for Extraterrestrial Rover
Authors : Dr. Ganesha Udupa, Dr. Pramod Sreedharan, Abin Simon, Kailash Dutt, Praveen Basil, Sreekuttan T.K., Adithye Suresh, Arun M., Ganesha Udupa and Pramod Sreedharan
Publisher : International Journal of Innovative Research in Science, Engineering and Technology
Design and Development of an Intelligent Rover for Mars Exploration (Updated)
Authors : Dr. Balakrishnan Shankar, Dr. Ganesha Udupa, Maya Menon, A. S, VJ, U., Kalathil, S. T., Simon, A., CM, H., Mathew, D. P., Basil, P., Ramachandran, R., Sengar, A.,., Dutt, K., Murali, A., Tilak, C. Krishna, Suresh, A., Suresh, A., B. Shankar, and Dr. Ganesh Udupa
Publisher : The Mars Society with permission
An investigation on the effect of nickel content on the wear behaviour and mechanical properties of spinodal bronze alloy cast in metal mould
Authors : Dr. Karthik V. Shankar, Dr. Sellamuthu R.
Publisher : International Journal of Materials Engineering Innovation.
A novel underactuated multi-fingered soft robotic hand for prosthetic application
Authors : Dr. Ganesha Udupa, Dr. Pramod Sreedharan, Mata Amritanandamayi Devi
Publisher : Robotics and Autonomous Systems (Elsevier)
Development of Cu-6Sn-5Ni-xTi and to analyse their mechanical and wear properties in as-cast condition
Authors : Dr. Karthik V. Shankar, Paul, C., & Sellamuthu, R.
Publisher : International Journal of Microstructure and Materials Properties
Determination of optimum aging temperature and time, mechanical and wear properties for Cu-9Ni-6Sn spinodal bronze alloy cast using permanent mould
Authors : Dr. Karthik V. Shankar, Dr. Sellamuthu R.
Publisher : International Journal of Materials Engineering Innovation, Inderscience Enterprises Ltd.,
Anti-Bourdon tube pressure gauge
Authors : Dr. Pramod Sreedharan, Dr. Ganesha Udupa, Mata Amritanandamayi Devi
Publisher : Measurement
Magnetic and dielectric properties of nickel-ferrite-embedded natural rubber composites
Authors : Dr. Sreedha Sambhudevan, Dr. Balakrishnan Shankar, Sankar S. Menon; Radhu Krishna; Lida Wilson; Anshida Mayeen; Nandakumar Kalarikkal
Publisher : Polymer Bulletin
Magnetic Properties of Copper Doped Nickel Ferrite Nanoparticles Synthesized by Co Precipitation Method
Authors : Dr. Sreedha Sambhudevan, Dr. Balakrishnan Shankar, V Anjana; Sara John; Pooja Prakash; Amritha M Nair; Aravind R Nair
Publisher : IOP Conference Series: Materials Science and Engineering
Mixing studies in turbulent oxy-methane jets with and without reaction
Authors : Dr. Srikrishnan A. R., Tamal, J., Deependran, B., Ajith Kumar R.
Publisher : Lecture Notes in Mechanical Engineering, Pleiades Publishing
Applying ECFM combustion model to spark ignition engine, comparison with experimental data
Authors : Dr. Ajith Kumar S., A. Jeevan Sai; R. Balamurugan; Cedric Servant; Frederic Ravet
Publisher : Advances in Fluid and Thermal Engineering- Part of the Lecture Notes in Mechanical Engineering book series (LNME), Springer Singapore,
Enhancement of flow-induced motion of rigid circular cylinder on springs by localized surface roughness at 3×104≤Re≤1. 2×105 Park
Authors : Dr. Ajith Kumar R.
Publisher : Ocean Engineering
Numerical Analysis of Effects of Turbine Blade Tip Shape on Secondary Losses
Authors : Dr. Srikrishnan A. R., Sarath, R. S., Ajith Kumar, R., Prasad, B.V.S.S.S.
Publisher : Fluid Mechanics and Fluid Power – Contemporary Research, Part of the Lecture Notes in Mechanical Engineering book series (LNME), Springer India
Selective Roughness in the Boundary Layer to Suppress Flow-Induced Motions of Circular Cylinder at 30,000
Authors : Dr. Ajith Kumar R., Park, H.a; Bernitsas, M.M.a b
Publisher : Journal of Offshore Mechanics and Arctic Engineering