An Inverse Technique to Estimate the Heat Flux of a Slab with Transient Heat Conduction
Authors : Dr. Pradeep S. Jakkareddy, Siddhartha Gollamudi
Publisher : Springer
Year : 2022
Investigation on mechanical properties of biodegradable polymers
Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R., Krishna Kanth V
Publisher : IOP Conf.
Year : 2021
Investigation on Structural Characteristics of Bamboo Laminates
Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R., ChellaNanda Kishore, Krishna Kanth V
Publisher : IOP Conf.
Year : 2021
Investigation on tribological properties of heat-treated Al6061/WC/Gr HMMCs
Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R., VemuriVenkata PhaniBabu, ViswanathMantha S. R.
Publisher : AIP Conference
Year : 2021
Investigation on effects of Nitrile Butadiene Rubber on mechanical and wear properties of glass fiber reinforced polymer composites
Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R., R.Jayachandra, TeegalaHarshath, Vuppala Manish, A. TarunTeja
Publisher : AIP Conference
Year : 2021
Investigation on Al6061-WC & Al6061-Gr particulate reinforced MMCs mechanical behavior under ageing
Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R., DullamAyyappa
Publisher : AIP Conference
Year : 2021
Workspace Analysis of Industrial Manipulators and its Effective Teaching in RoboAnalyzer
Authors : Dr. Rajeevlochana G. Chittawadigi, Sayan Pradhan, Suhrit Kumar Pakhira, Tanushree Jana, Subir Kumar Saha
Publisher : IEEE
Year : 2021
Monocular Tracking of Human Hand on a Smart Phone Camera using MediaPipe and its Application in Robotics
Authors : Dr. Rajeevlochana G. Chittawadigi, Sreehari Sreenath, D. Ivan Daniels, Apparaju S. D. Ganesh, Yashaswi S. Kuruganti
Publisher : IEEE
Year : 2021
Offline Simulation of Motion Planning of a Planar Manipulator in RoboAnalyzer and its Integration with a Physical Prototype
Authors : Dr. Rajeevlochana G. Chittawadigi, Medha Shruti
Publisher : IEEE
Year : 2021
Hand Tracking in 3D Space using MediaPipe and PnP Method for Intuitive Control of Virtual Globe
Authors : Dr. Rajeevlochana G. Chittawadigi, Vaishnav Chunduru, Mrinalkanti Roy, Dasari Romit N. S
Publisher : IEEE
Year : 2021
Development of A Technology Education Programme based onSelf-Driven, Self-Learning and Self-Evaluating
Authors : Dr. Rajeevlochana G. Chittawadigi, Zahnupriya Kalita ; Abhijit Boruah; Subir K. Saha
Year : 2021
Interactive Image Projective Desktop and Screen Using Hand Tracking by Leap Motion
Authors : Dr. Rajeevlochana G. Chittawadigi, Mrinalkanti Roy; Dasari Romit N. S; Vaishnav Chunduru; Subir Kumar Saha
Publisher : IEEE
Year : 2021
Development of A Technology Education Programme based on Self-Driven, Self-Learning and Self-Evaluating Approach
Authors : Dr. Rajeevlochana G. Chittawadigi, Nayan M. Kakoty, Zahnupriya Kalita, Abhijit Boruah and Subir K. Saha
Publisher : Advances in Robotics (AIR 2021): 5th International Conference of The Robotics Society
Year : 2021
Study of Microstructure and Mechanical Properties of Metal Matrix Composites subjected to Severe Plastic Deformation – A Review
Authors : Dr. Phanibhushana M. V., P. Ramu, R. Hari Kiran Reddy, B. Kunaal Kumar, T. Padmanathan
Year : 2021
Study of Microstructure and Mechanical Properties of Metal Matrix Composites subjected to Severe Plastic Deformation – A Review
Authors : Dr. Phanibhushana M. V., K. Nitheeshwaran, T. Padmanathan, S. M. Sakthi Vignesh, M. Shri Anantha Sayan
Publisher : International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2020)
Year : 2020
Six Sigma in Piston Manufacturing
Authors : Divya Sharma S. G., A. Vamsikrishna, Medha Shruti
Publisher : Advances in Industrial and Production Engineering
Year : 2020
Intuitive Control of 3 Omni-wheel based Mobile Plat-form using Leap Motion
Authors : Dr. Rajeevlochana G. Chittawadigi, Devasena Pasupuleti, Dimple Dannana, Raghuveer Maddi, Uday Manne
Publisher : Congress on Intelligent Systems
Year : 2020
Effective Teaching of Homogenous Transformations and Robot Simulation using Web Technologies
Authors : Dr. Rajeevlochana G. Chittawadigi, Kuruganti S. Yashaswi, Apparaju S. D. Ganesh,D. Ivan Daniels
Publisher : Congress on Intelligent Systems
Year : 2020
Performance Characteristics of Asymmetric Body in Hypersonic Flow
Authors : Vinod Kotebavi, Nitin D
Publisher : Springer
Year : 2020
Weight optimization of gimbal joint for aircraft application
Authors : Dr. Dileep B. P., Ravishankar, M.K.
Publisher : AIP Publishing
Year : 2019
Parametric Analysis of Waverider in Hypersonic Flow
Authors : Dr. Shali S., Hari Venkates, Harish Pillai, Hemanth Venkatesan, Akshay Sudhakaran
Publisher : AIP Conference Proceedings
Year : 2019
Design and Development of Pneumatic Drug Delivery System
Authors : Dr. Prashanth B N, Abhinandu, K.V.S. Pramod Kumar, T. Srikanth
Publisher : Proceedings of the International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018)
Year : 2019
A comparative study on performance and emission characteristics of palm and castor dual biodiesel blends in CI engine
Authors : Vinod Kotebavi, Pala Tejesh
Publisher : AIP Conference Proceedings
Year : 2019
Study on performance and emission characteristics of CI engine fueled with canola oil – Diesel blends
Authors : Vinod Kotebavi, S. S. Krishna Murthy
Publisher : AIP Conference Proceedings
Year : 2019
Numerical analysis on enhancement of heat transfer from a heated surface (fins)
Authors : Arjun Damodar E.T, and Dinesh kumar L
Publisher : AIP Conference Proceedings
Year : 2019
Mono fluid heat exchanger system
Authors : Prakash, Divakar Shetty
Publisher : AIP Conference Proceedings
Year : 2019
Experimental investigation on influence of molybdenum content on tribological properties of hybrid PTFE composite
Publisher : AIP Conference Proceedings
Year : 2019
Effect of shock waves on bio-diesel
Authors : Sandeep Koundinya, Bhat, K.V.; Prasath, S.G.; Vishal, T.V.; Teja, V.S.
Publisher : International conference on Emerging Trends in Mechanical Engineering/AIP, American Institute of Physics Inc.
Year : 2019
Comparison of Performance and Emission Characteristics of a CI Engine Fuelled with Dual Blends: Palm, Sesame oils and Diesel
Authors : Pala Tejesh, Pamarthi Shyam, P Siva Durga Prasad, and Vinod Kotebavi
Publisher : National conference on Automotive systems Design
Year : 2018
Performance investigation of rotary heat exchanger installed with four ducts using CFD
Authors : Saneesh Nair, Vinod Kotebavi, Alokekumar Das
Year : 2018
Effect of ECAP on Mechanical and Micro-Structural Properties Of Al7075-Ni Alloy
Authors : Dr. Ravi Kumar V., Dr. Dileep B. P., H.R. Vitala, M.M. Suraj
Publisher : Materials Today: Proceedings
Year : 2018
A Simulation study of cooling system for heavy duty diesel engine
Publisher : MATEC Web of Conferences
Year : 2018
Performance analysis of a solar still coupled with evacuated heat pipes
Authors : Vinod Kotebavi, Pramod B.V.N, Prudhvi Raj J, Hari Krishnan S.S, Kotebavi V.
Publisher : IOP Conference Series: Materials Science and Engineering
Year : 2018
Optimal sub-parametric finite element approach for a Darcy-Brinkman fluid flow problem through a circular channel using curved triangular elements
Authors : Dr. V. Kesavulu Naidu, ; Banerjee, D.; Siddheshwar, P.G.; Shankara
Publisher : IOP Conference Series: Materials Science and Engineering
Year : 2018
Influence of turning Treatments on Al6061 by Offline Inspection Technique
Authors : Dr. Ulhas K Annigeri, K L G Sandeep, M Prasanna Chaitanya, G Sairam Varma1 and B Arun Datta
Publisher : IOP Conference Series: Materials Science and Engineering
Year : 2018
Design and Development of Hybrid Wind and Solar Energy System for Power Generation
Authors : Dr. Prashanth B N, Dr. Pramod R., R. Pramod, G. B. Veeresh Kumar
Publisher : Materials Today: Proceedings
Year : 2018
A case study on Solar Vapour absorption refrigeration system
Publisher : International Journal of Engineering and Technology(UAE)
Year : 2018
An Ant Colony TSP to Evaluate the Performance of Supply Chain Network
Authors : Dr. T. Srinivas Rao
Publisher : Materials Today: Proceedings
Year : 2018
2D Finite Element Thermo-Mechanical Model to Predict Machining Induced Residual Stresses Using ALE Approach
Authors : Dr. Prakash Marimuthu K., C. S. C. Kumar, and H. P. T. Prasada
Publisher : Materials Today: Proceedings
Year : 2018
Attenuation of shock waves by using porous media
Authors : Dr. Nagaraja S. R., B V N Pramod, Jami Prudhvi Raj, C H Parashar, Aditya Kartha
Publisher : International conference on Emerging Trends in Mechanical Engineering, American Institute of Physics Inc.
Year : 2018
Robot Visualization Software for Robot Technicians in Advances in Robotics
Authors : Vaibhav Gupta, Rajeevlochana G. Chittawadigi and Subir K. Saha
Publisher : International Conference of Robotics Society of India
Year : 2017
Methodology to Determine Counterweights for Passive Balancing of a 3-R Orientation Sensing Mechanism using Hanging Method
Authors : Shasa A. Antao, Vishnu S. Nair, Rajeevlochana G. Chittawadigi
Publisher : International and 18th National Conference on Machines and Mechanisms
Year : 2017
Vibration of non-uniform rod using Differential Transform Method
Authors : Dr. Shali S., S. Shali;.; Jafarali, P.
Publisher : IOP Conference Series: Materials Science and Engineering
Year : 2017
Studies on the effect of the temperature of intermediate fluid on the effectiveness of three fluid heat exchangers
Authors : Dr. Rakesh S. G., Vasudevan, T.; .; Sanjay S D.; Malla S.G.
Publisher : International Conference on Materials Manufacturing and Modelling (ICMMM – 2017), American Institute of Physics Inc.,
Year : 2017
Method of stir casting of Aluminum metal matrix Composites: A review
Authors : Dr. Ulhas K Annigeri, Veeresh Kumar G. B.
Publisher : Materials Today: Proceedings
Year : 2017
A Comparative Evaluation of GA and SA TSP in a Supply Chain Network
Authors : Dr. T. Srinivas Rao
Publisher : Materials Today: Proceedings, Elsevier Ltd,
Year : 2017
Actively Tuned Vibration Absorber using Smart Adaptive Composites
Authors : Dr. Nagaraja S. R., Noolvi, B.; Raja, S.;
Publisher : Materials Today: Proceedings
Year : 2017
Experimental study on RedMud based GeoPolymer concrete with flyash and GGBS in ambient temperature curing
Authors : Dr. Smita Singh, Rahul Das Biswas
Publisher : International Journal of Advances in Mechanical and Civil Engineering
Year : 2016
Calibration of Hypersonic Test Facility at Amrita School of Engineering, Bengaluru
Authors : T. Vasudevanand Rakesh S.G.
Publisher : National Symposium on Shock Waves
Year : 2016
Investigation of mechanical properties of Al6082-nickel composites
Authors : Sujith Sai, Anish, Dileep B.P
Publisher : International Conference on Energy Environment and Engineering
Year : 2016
Experimental study and comparison with computational study on cooling of PV solar panel using finned heat pipe technology
Authors : Sandeep Koundinya, Vignesh Kumar N and A.S. Krishna
Year : 2016
A comparative study on mechanical properties of heat treated EN24 alloy steel and its MMC
Authors : Dileep B.P and Ravi Kumar V
Publisher : International conference on Mechanical Engineering
Year : 2016
Computational and Experimental study of fluid flow and heat transfer characteristics in porous media
Authors : SandeepKoundinya, Vignesh Kumar N, A.S.Krishnan
Year : 2016
Performance and emission characteristics of CRDI engine working on plastic oil
Authors : Divaker Shetty A.S., Ravishankar Shukla
Publisher : International conference AMMMT
Year : 2016
Non-uniform beam vibration using Differential Transform Method
Authors : Dr. Shali S., P Jafarali
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012158 (2016)
Year : 2016
Heat Transfer Enhancement in Solar Air Heater Duct Fitted With Punched Hole Delta Winglets
Authors : Vinod Kotebavi, Hithesh.U. Warrier
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012225
Year : 2016
Performance Study of Solar Heat Pipe with Different Working Fluids and Fill Ratios
Authors : Vinod Kotebavi, S S Harikrishnan; Vinod Kotebavi
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012224
Year : 2016
Pyramid type solar still coupled with evacuated tubes
Authors : Vinod Kotebavi, Ganesh A
Publisher : 2016 Biennial International Conference on Power and Energy Systems: Towards Sustainable Energy (PESTSE) (2016)
Year : 2016
Computational study of Coanda based Fluidic Thrust Vectoring system for optimising Coanda geometry
Authors : Dr. Prakash Marimuthu K., R Bharathwaj, P Giridharan, K Karthick, C Hari Prasath
Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012210
Year : 2016
Durability of Red Mud Based Geopolymer Paste in Acid Solutions
Authors : Dr. Smita Singh, Aswath, M.U.; Ranganath, R.V.
Publisher : 2016 the First International Conference on Civil Engineering and Materials Science, Trans Tech Publications Ltd
Year : 2016
Durability of Bricks Coated with Red mud Based Geopolymer Paste
Authors : Dr. Smita Singh, S.N. Basavanagowda; M. U. Aswath; R. V. Ranganath
Year : 2016
Passive Balancing of a Novel 3-R Orientation Sensing Mechanism
Authors : Dr. Rajeevlochana G. Chittawadigi, Shasa A. Antao;Vishal, S.; Rajan, S.; Nair, V. S.
Publisher : 8th Asian Conference on Multibody Dynamics (ACMD2016).
Year : 2016
Tsunami Wave Impact on Structures
Authors : Akhila (S8),RameshBabu(S8) Abhijeet(S8), Prakash Marimuthu
Year : 2015
Design and Fabrication of Pot-Hole Road repair machine
Authors : Devathi Yadhunandana Sandeep Kumar( S8),Harshavardhan(S8) Jayankreddy(S8) PrasadamVamsi(S8) Pramod.R
Year : 2015
Design And Development Of Wind Turbine Based Hybrid Fruits And Vegetables Preservation Unit
Authors : Pramod R,M DattaSandesh(S8),M Sandeep(S8) Jayaram, KottakotaKalasagarreddi(S8)
Publisher : National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering
Year : 2015
Design and development of Tesla Turbine
Authors : PallerlamudisaisriHarsha( S8), Udaykumar(S8), Pramod.R
Publisher : National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering
Year : 2015
Effect of Iron Oxide nanoparticle in bio digestion of portable food waste digester
Authors : Sreekanth K M, DebjyotiSahu
Year : 2015
Virtual Robots Module: An effective visualization tool for Robotics Toolbox
Authors : Dr. Rajeevlochana G. Chittawadigi, Sadanand, Ratan O. M; Joshi, Ravi; Saha, Subir K
Publisher : Proceedings of 2nd Advances in Robotics
Year : 2015
Performance test of cryogenically treated and coated tungsten carbide cutting inserts
Authors : Dr. Y. P. Deepthi, Raghavendra Ravikiran K., Prakash, M.
Publisher : International Conference on Mechanical and Manufacturing Engineering (ICMME)
Year : 2015
MechAnalyzer: 3D Simulation Software to Teach Kinematics of Machines
Authors : Dr. Rajeevlochana G. Chittawadigi, Lokesh, Rakshith; Saha, Subir Kumar
Publisher : 2nd International and 17th National Conference on Machines and Mechanisms (iNaCoMM2015)
Year : 2015
MechAnalyzer: 3D Model Based Mechanism Learning Software
Authors : Dr. Rajeevlochana G. Chittawadigi, Hampali, Shamanth; Saha, Subir K
Publisher : Proceedings of the 14th IFToMM World Congress
Year : 2015
Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding wear of Al6061 Alloys
Authors : Dr. Veeresh Kumar G. B., R Pramod
Publisher : International Conference on Mechanical and Manufacturing (ICMME 2015)
Year : 2015
Exergy Analysis of Biogas Digester and Effect of Iron Oxide Nanoparticle in Bio Digestion
Publisher : Second International Conference on Nanaotechnology 2015
Year : 2015
Waste Segregation System using Automated Garbage Bin
Authors : Mr. Prashanth B N and Mr. Pramod R
Year : 2014
Design of a Foldable Chassis Vehicle and Steering Mechanism
Authors : Arjun Murali, E. P. Subash, Harish P., Pramod R.
Year : 2014
Design and Fabrication of Metal Chip Compaction Machine
Authors : Muralikrishna U., Vishnu S., RohitNambiar, MedhasKerkar, R. Pramod
Year : 2014
Design and Fabrication of Amphicraft
Authors : Jayanth P. V., Ashwin R. Sivaraman R., Pramod R
Year : 2014
Design and Development of Automobile Driving Mechanisms for Disabled Arm People
Authors : B. Arjun Nataraj, ArunSiddarth S., Karthikeyan S., Pramod R.
Year : 2014
A Heuristic to Solve Vehicle Routing Problems with Time Slots
Authors : Deepak Ravi, Samta Phulli, Darshan Hegde, Prakash Marimuthu
Year : 2014
Integration of Selective Catalytic Reduction Components in the Engine Dynamometer Test Bench
Authors : Debanshu Basu, Vinod Kotebavi
Year : 2014
Design and Development and Analysis of Forming Tool for Side Panel Of an Automobile
Authors : Mr. Ulhas K Annigeri, Mrs. Deepthi. Y. P, Mr. Raghavendra RaviKiran
Publisher : International Conference on Computer Science and Mechanical Engineering
Year : 2014
Investigation of Mechanical and Fracture Properties of Electroplated High Strength Aluminum 7075, T6 Alloy
Authors : Mohan Kumar, Pramod R
Publisher : International Conference on Advances In Engineering and Technology
Year : 2014
Waste Segregation System using Automatic Garbage Bin
Authors : Dr. Prashanth B N, Prashanth B. N., Pramod R
Publisher : International Conference on Advances in Engineering and Technology
Year : 2014
Artificila Neural Networks For Predicting the Tribological Behavior of Al7075-SiC Metal Matrix Composites
Authors : Veeresh Kumar G. B., Pramod R.
Publisher : International conference on Advances In Engineering and Technology
Year : 2014
Study of performance and emission characteristics of diesel engine fueled with waste cooking oil biodiesel
Authors : Likhith N, Bharat P C, Praveen Kumar A, Vinod kotebavi
Publisher : International Conference on Innovations and Emerging Trends in Mechanical Engineering
Year : 2014
Mathematical Analysis on E-Glass Fiber and Silicon Carbide Reinforced Aluminum2618 Hybrid Composite
Authors : Dr. Phanibhushana M. V., Kottakota Kalasagarreddi, Sobhan Prem Sai Koppuravuri, Gundu Vinay Kumar, Phanibhushana M.V, Prakash Marimuthu K
Publisher : International Conference on Innovations and Emerging Trends in Mechanical Engineering
Year : 2014
Effect of Zinc coating on mechanical properties of Al7075
Authors : Dileep B P, Ravi Kumar V, Mrudula Prashanth, Phanibhushana M V
Publisher : International Mechanical Engineering Congress
Year : 2014
Maximum Permissible Ground Testing Durations for Various Thermal Barrier Coatings in a solid Rocket Model
Authors : Aditya Kumar, Nagaraja S.R
Publisher : International Mechanical Engineering Congress
Year : 2014
Evaluation of Mechanical Properties of Hybrid composite Reinforced with SiC and MgO
Authors : Mohan kumar. S, Pramod R
Publisher : International Conference on Mechanical Engineering
Year : 2014
Waste heat recovery by thermo-electric generation
Authors : Yashwanth B, Naveen V, Vinayaka Moorthy N, Nagaraja S R
Publisher : International Conference on Mechanical Engineering
Year : 2014
Experimental Investigation on Red mud Based Geopolymer Mortars
Authors : Mrs. Smitasingh
Publisher : International conference on Sustainable Civil Infrastructure
Year : 2014
Study and Analysis of Composite Elbow subjected to Internal Pressure
Authors : Mr. Balasubramanya. H. S. presented
Publisher : International conference on Polymer Composites
Year : 2014
Performance analysis of a VCR SI engine using petrol alcohol blends
Authors : Vinod Kotebavi, Basu, D., Phulli, S
Publisher : 2014 Power and Energy Systems Conference: Towards Sustainable Energy, PESTSE 2014
Year : 2014
The Effect of deep cryogenic treatment on Mechanical Properties of Al-SiC composite
Authors : Mrudula Prashanth, G. D. krishnan, Sheshu, babu, Srikanth, R.
Publisher : National Conference on Advances in Mechanical Engineering held at T John Institute of Technology, Bangalore
Year : 2014
Development of Stage tools for Side Panel of an automobile
Authors : Raghavendra Ravikiran K., Dr. Ulhas K Annigeri, Y.P., Deepthi, K. Annigeri Ulhas
Publisher : International Conference of Mechanical Engineering
Year : 2014
Design of an Eco-friendly Pneumatic Engine for Reduced Fuel Consumption: A Conceptual Approach
Authors : Dr. Shashi Kumar M. E., K. Ch, and Nadeem, M. I.
Publisher : National Conference on Advances in Mechanical Engineering AIM-2014
Year : 2014
Design, Development and Analysis of Forming tool for side panel of an automobile
Authors : Dr. Y. P. Deepthi, Raghavendra Ravikiran K., Dr. Ulhas K Annigeri
Publisher : International Conference on Computer science and Mechanical Engineering
Year : 2014
Artificial Neural Networks for Predicting the Tribological Behaviour of Al7075-SiC Metal Matrix Composites
Authors : Dr. Veeresh Kumar G. B., P. R.
Publisher : International Conference on Advances in Engineering and Technology
Year : 2014
Analysis of Natural Frequency using Differential Transform Method
Authors : Dr. Shali S., Nagaraja, S. R., Jafarali, P.
Publisher : International Multi Conference on Innovations in Engineering and Technology
Year : 2014
The Effect of Retrogression and Reaging Treatment on Properties of 7010 Aluminium Alloy forgings
Authors : Mrs. Mrudula Prashanth
Year : 2013
Finite Element Simulation of Effect of Residual Stresses during Orthogonal Machining using ALE Approach
Authors : P. Krishnakumar; K. Prakash Marimuthu; K. Rameshkumar; K. I. Ramachandran
Publisher : International Journal of Machining and Machinability of Materials
Year : 2013
Numerical modeling of steam condensation
Authors : Mr. Akhil. J
Publisher : 22nd national and 11th international ISHMT-ASME
Year : 2013
Virtual Robots in RoboAnalyzer Software
Authors : Dr. Rajeevlochana G. Chittawadigi, R. Sadanand OM, and Saha, S. K
Publisher : The 1st International 16th National Conference on Machines and Mechanisms
Year : 2013
Teaching and Learning of Robot Kinematics Using RoboAnalyzer Software
Authors : Dr. Rajeevlochana G. Chittawadigi, Bahuguna, Jyoti; Saha, Subir K
Publisher : Teaching and Learning of Robot Kinematics Using RoboAnalyzer Software
Year : 2013
Identification of Denavit-Hartenberg Parameters of an Industrial Robot
Authors : Dr. Rajeevlochana G. Chittawadigi, Hayat, Aamir A; Saha, Subir K
Publisher : Advances in Robotics
Year : 2013
Geometric model identification of a serial robot
Authors : Dr. Rajeevlochana G. Chittawadigi, Hayat, A. A., and Saha, S. K.
Publisher : The 3rd IFToMM International Symposium on Robotics and Mechatronics
Year : 2013
The effect of Retrogression and Re-aging treatment on properties of 7010 Aluminium Alloy Extrusions
Authors : Mrudula Prashanth, P. S. V., Kshirod, C. Mohanta, and R., R. Bhat
Publisher : National level Paper presentation and project exhibition held at East Point college of Engineering, Bangalore
Year : 2013
An Analytical Method to Detect Collision between Cylinders Using Dual Number Algebra
Authors : Dr. Rajeevlochana G. Chittawadigi, Saha, Subir K
Publisher : IEEE/RSJ International Conference on Intelligent Robots and Systems
Year : 2013
Investigations on Forming of Thin Metallic Plates subjected to Shock Wave Loading
Authors : Nagaraja S. R
Year : 2012
Realistic Modeling and Dynamic Simulation of KUKA KR5 Robot using RecurDyn
Authors : Dr. Rajeevlochana G. Chittawadigi, S. Kumar, and Saha, S. K.
Publisher : The 6th Asian Conference on Multibody Dynamics
Year : 2012
Prediction on Wear of Al7075-Al2O3 MMCs using Artificial Neural Networks
Authors : Dr. Veeresh Kumar G. B., S. N.,G. B., and C.S.P., R.
Publisher : International Conference Advances In Mechanical, Manufacturing and Building Sciences
Year : 2012
Control of an Omnidirectional Walking Simulator
Authors : Dr. Rajeevlochana G. Chittawadigi, Chauhan, Manish; Rajeevlochana G. Chittawadigi; Saha, Subir K; Singh, Satinder Paul
Publisher : 12th International Symposium on Experimental Robotics
Year : 2012
Automatic Extraction of DH Parameters of Serial Manipulators using Line Geometry
Authors : Dr. Rajeevlochana G. Chittawadigi, Saha, S. K., and Kumar, S.
Publisher : The 2nd Joint International Conference on Multibody System Dynamics
Year : 2012
Performance Analysis of a Variable Compression Ratio Engine using Petrol Ethanol Blends
Authors : Vinod Kotebavi
Year : 2011
An Experimental Investigation on Drillability of GFRP/CFRP Composites
Authors : R. Pramod
Year : 2011
Characterization of Electroplated High Strength Alluminium Alloy 7075-T6
Authors : Mohan Kumar S and Dileep B. P
Publisher : International Conference on Design and Advances in Mechanical Engineering
Year : 2011
Mechanical & Tribological Properties of Al6061-Tungsten Carbide-Graphite Hybrid Metal Matrix Composites
Authors : Veeresh Kumar G. B
Publisher : International Conference on Recent Advances in Mechanical Engineering
Year : 2011
FEM Model for Measurement of Hardness of INCONEL 718 Coatings
Authors : Pramod R
Publisher : International Conference on Recent Advances in Mechanical Engineering
Year : 2011
Finite Element Modelling and Analysis of Drilling of GFRP/CFRP Composites
Authors : Shashi Kumar and Pramod R
Publisher : International Conference on Advanced Materials
Year : 2011
Theoretical Prediction of Tribological Properties of Al6061-SiC Composites
Authors : Dr. Veeresh Kumar G. B., N. Selvaraj, and C.S.P., R.
Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)
Year : 2011
Synthesis and Property Evaluation of Al7075-Al2O3 Composites
Authors : Dr. Veeresh Kumar G. B., S. N., and C.S.P. Rao
Publisher : International Conference on Smart Technologies for Materials, Communication, Controls, Computing and Energy (ICST 2011)
Year : 2011
Recursive Robot Dynamics in RoboAnalyzer
Authors : Dr. Rajeevlochana G. Chittawadigi, Jain, Amit; Shah, Suril V; Saha, Subir K
Publisher : 15th National Conference on Machines and Mechanisms
Year : 2011
Prediction on Wear Properties of Al6061-Al2O3 MMCs using Artificial Neural Networks
Authors : Dr. Veeresh Kumar G. B., N., Selvaraj; C.S.P., Rao
Publisher : Amrita School of Engineering
Year : 2011
An Investigation on Drillability of GFRP/CFRP Composites using Design of Experiments
Authors : Dr. Pramod R., Dr. Prashanth B N, Dr. Shashi Kumar M. E., Shashi Kumar M. E., and B. N. Prashanth
Publisher : EGSPEC
Year : 2011
Integration Frame Work for Portability of Data between PLM with ERP Systems
Authors : Dr. Pramod R., Dr. Prashanth B N, Dr. Shashi Kumar M. E., Shashi Kumar M. E., and B. N. Prashanth
Publisher : AMMMT, National Conference, Manipal University
Year : 2011
Finite Element Modeling and Analysis of Drilling of GFRP/CFRP Composites
Authors : Dr. Pramod R., Dr. Prashanth B N, Dr. Shashi Kumar M. E., Shashi Kumar M. E., and B. N. Prashanth
Publisher : BTLIT
Year : 2011
Experimental Investigation of Properties of Al6061-SiC MMCs
Authors : Dr. Veeresh Kumar G. B., Shekar, S
Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)
Year : 2011
Experimental Investigation of Properties of Al6061-Al2O3 MMCs
Authors : Dr. Veeresh Kumar G. B., Srikanth, Shekar, Meena
Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)
Year : 2011
Dynamic Simulation of a KUKA KR5 Industrial Robot using MATLAB SimMechanics
Authors : Dr. Rajeevlochana G. Chittawadigi, A. D. Udai, Saha, S. K.
Publisher : 15th National Conference on Machines and Mechanisms
Year : 2011
Combined effect of T6 heat treatment and reinforcements on tribological properties in Al6061/WC /Gr metal matrix hybrid composites
Authors : Dr. Veeresh Kumar G. B., A., Ramesh, A.R.K., Swamy
Publisher : Joint International Conference on Advanced Materials (ICAM 2011)
Year : 2011
Mechanical& Tribological Properties of Al6061-Tungsten Carbide-Graphite Hybrid Metal Matrix Composites
Authors : Dr. Veeresh Kumar G. B., R. A. and A.R.K., S.
Year : 2011
Integrating Winchill PLM with ERP
Authors : Pramod R and Prashanth BN
Publisher : International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences
Year : 2010
FEA of Aluminium Based MMCS and HMMCs
Authors : Pramod R
Publisher : International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences
Year : 2010
Studies on Aluminum Alloy 6061-Al2O3 Composites
Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.
Publisher : College of Engineering Trivandrum
Year : 2010
Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide Composites
Authors : Dr. Veeresh Kumar G. B., A.R.K., Swamy; A., Ramesha; J.N., Prakash
Publisher : Dayananda Sagar College of Engineering
Year : 2010
Design of Web Based Aggregation of Materials in a supply chain network using genetic Algorithm
Authors : Dr. T. Srinivas Rao, R., N. N. V., and Mallikharjuna, B.
Publisher : Andhra University, Vishakhapatnam
Year : 2010
Design of Mechanical separator for solid waste management
Authors : Sandeep Koundinya, Gowtham, D., and babu, padagakumara
Publisher : 3rd International Perspective on Current and future state of water resources and the environment
Year : 2010
Assessment of Wear Resistance of Al6061-SiC Metal Matrix Composites using Wear Endurance Index
Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.
Publisher : ollege of Engineering Trivandrum
Year : 2010
The Numerical Modeling of Fatigue Behavior In Fiber Reinforced Composite
Authors : Debjyoti Sahu and Aravinda Kumar M S
Year : 2009
Study of performance and emission characteristics of a Diesel Engine fuelled with Bio diesel and vegetable oil blends
Authors : Vinod Kotebavi and M V Phanibhushana
Year : 2009
Studies on Forming of Thin Metal Foils for Bio-Medical Applications of Shock Waves
Authors : Rakesh S. G and Nagaraja S. R
Publisher : International Symposium on Shock Waves
Year : 2009
Micro Blast Wave Assisted Bacterial Cell Transformation
Authors : Rakesh S. G
Publisher : International Symposium on Shock Waves
Year : 2009
Lead Time Reduction in Cupellation of the Fire Assaying Process
Authors : Prakash Marimuthu
Publisher : International Conference on Total Engineering, Analysis & Manufacturing Technologies
Year : 2009
Performance Evaluation of a CI Engine Fueled with Biodiesel and Vegetable Oil Blends
Publisher : International Conference on Total Engineering, Analysis & Manufacturing Technologies
Year : 2009
Studies on Aluminum Alloy 7075-SiC Composites
Authors : Dr. Veeresh Kumar G. B., Murali, Mohan
Publisher : Don Bosco Institute of Technology, Bangalore
Year : 2009
Spatial R-C-C-R Mechanism for a Single DOF Gripper
Authors : Dr. Rajeevlochana G. Chittawadigi, Rajeevlochana G. Chittawadigi
Publisher : Proceedings of the 14th national conference on machines and mechanisms
Year : 2009
Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide-Graphite Hybrid Composites
Authors : Dr. Veeresh Kumar G. B., A.R.K., Swamy; A., Ramesha; J.N., Prakash
Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)
Year : 2009
Effect of Nitriding on Mechanical Properties of Graphite Reinforced Al6061 MMCs
Authors : Dr. Veeresh Kumar G. B., G.R.C., Pradeep
Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)
Year : 2009
Studies on Physical & Tribological Properties of Al6061-SiC Composites
Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; G.B.; C.S.P., Rao; Bhagyashekar, M.S.
Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)
Year : 2009
Web Based ERP Model for Product Requirement Planning
Authors : Vinod Kotebavi
Publisher : International Conference on Advances in Mechanical Engineering
Year : 2008
Studies on a Novel Constant Velocity Mechanism and Exploring its Use in Deployable Structures
Authors : Dr. Rajeevlochana G. Chittawadigi, R. Lochana, Sen, D.
Publisher : 5th National Seminar on Aerospace Related Mechanism
Year : 2005
Expert System for Sponge Iron Manufacturing
Authors : Dr. Veeresh Kumar G. B., K., Venkata Ramana; B.S., Kakol
Publisher : P.A. College of Engineering, Mangalore, Karnataka.
Year : 2005