Back close
Funded Projects
Sl. No. Project Name of the Student(s) Name of the Guide Amount Sanctioned – Rs.
1 Design and Development of Drainage Inspection and Anti-Clogging Robot Mr. Nakka Suryasatya, Sanjeevi & others Mr. B. N. Prashanth 6, 500. 00
2 Development of an Eco-friendly Pneumatic Engine for Reduced Fuel Consumption Mr. M. I. Nadeem & others Mr. M. E. Shashi Kumar 6, 500. 00
3 Design and Development of Automobile Driving Mechanism for Disabled Arm People Mr. B. Arjun Nataraj & others Mr. R. Pramod 6, 500. 00
Pedagogical Initiatives

Journal Article

Optimization of Drilling Parameters on Alkaline Treated Jute Fiber Sandwich Material

Authors : Dr. Dileep B. P., Sathish Kumar, S., Suresh, A.V., Nagamadhu, M., Vitala, H.R.

Publisher : International Journal of Recent Technology and Engineering

Micro-Shock Waves Mediated Needle-less Vaccine Delivery

Authors : G. Jagadeesh and Rakesh S. G

Publisher : International Journal: Micro-Shock Waves Mediated Needle-less Vaccine Delivery

Design and Development of Automated Digital Indenter for Micro Hardness Measurement

Authors : Janaki. R

Publisher : National Journal: Manufacturing Technology Today

Stress Intensity Factor for Arbitrarily Located and Oriented Cracks in a Cylindrical Shell with Tor-Spherical End Closures Subject to Internal Pressure

Authors : Shivashankar R. Srivatsa, H. Lakshminarayana, R. Pramod

Publisher : International Journal of Engineering Research and Applications

Effects of Ambient Heat In-Leak on the Performance of a Three Fluid Heat Exchanges for Cryogenic Applications

Authors : V.Krishna, Pradeep G.Hegde, N.Subramanian, K.N.Seetharamu

Publisher : International Journal of Heat and Mass Transfer

Modelling of the Cu and Fe Transport in Sand-bentonite and Sand-fly Ash Mixtures

Authors : Shankara Shankara, Maya Naik, Sivapullaiah Puvvadi

Publisher : International Journal of Earth Science and Engineering

Sorption of Iron & Copper on Sand-Bentonite -Fly Ash Mixtures

Authors : Shankara, S. N. Maya Naik, Sivapullaiah, S. A. S. Mohammed

Publisher : International Journal of Research in Chemistry and Environment

Tsunami Wave Impact on Structures

Authors : Dr. Prakash Marimuthu K., P L. Meyyappana, Akhila Roy,AbhijithJ, Ramesh M N V, Prakash Marimuthu K

Publisher : Scorpus

Design and fabrication of Pothole road repair machine.

Authors : Dr. Pramod R, D Y Sandeep Kumar, G Jayank Reddy, M Harshavardhan, P Vamsi.

Design and Development of Wind Turbine based hybrid fruits and vegetables preservation unit

Authors : Dr. Pramod R, M DattaSandesh, M Sandeep Jayaram, KottakotaKalasagarreddi.

Publisher : International Journal of Applied Engineering Research

Design and Development of Tesla Turbine

Authors : Dr. Pramod R, Pramod R, P. Sai Sri Harsha, K.A. Udaya Kumar.

Investigation on Mechanical Properites of Graphene Oxide reinforced Glass fiber reinforced Composites

Authors : Shashi Kumar M.E, R. Pramod, Arun G K, Nikhil Sreenivas, Kesari Brahma Reddy, K Sai Krsishna Reddy

Publisher : Advances in Materials and Manufacturing Applications

Potassium and Solium Ions through Red Earth Soil Using Column Tests

Authors : Shankara, S.N. Maya Naik, P.V. Sivapullaiah

Publisher : Advances in Materials and Manufacturing Applications

Electrochemical corrosion studies and mechanical characterization of al7050 metal matrix composite reinforced with zro2 particulate by stir casting method

Authors : Dipin Krishna, Jyothish, Ajai Anil Kumar, Subramanian, Mohan Kumar S, Ravi Kumar V

Publisher : International Journal of Mechanical Engineering and Technology

Effect of dimensions of sharp spiked cylinder on the buzz phenomenon subjected to hypersonic flows

Authors : Rakesh Sirangala Ganesh, Rajesh Ramachandran

Publisher : International Journal of Fluid Mechanics Research

On the tip opening of burner stabilized flames

Authors : Mohammed A N, Jithin E V, Dinesh Kumar L, Ratan Kishore V, Mohammed A

Publisher : International Journal, Energy and Fuels

3D Finite Element Model to predict machining induced residual stresses using ALE approach

Authors : Prakash Marimuthu K, Thirta Prasad H.P.

Publisher : International Journal ,Journal Of Engineering Science and Technology

Effect of Curing Methods on the Property of Red Mud Based Geopolymer Mortar

Authors : Dr. Smita Singh, Aswath M. Uddappa, R.V. Ranganath

Publisher : International Journal of Civil Engineering and Technology (IJCIET)

Hot Deformation Characterization of Haynes-242

Authors : Dr. Phanibhushana M. V., V.Gaurava, PedroJacinto, Paramo Kanetas

Publisher : Materials Today: Proceedings, Elsevier publications.

A study on the Effect of Cryotreatment on Copper based brass alloy

Authors : Mrudula Prashanth, Sumanth Reddy S, Sai Krishna S

Publisher : Test Engineering and Management journal

Investigation of Mechanical and Tribological Properties of Al6061–TiB2 Metal Matrix Composites

Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R, D. Gopinath Reddy; C. Vineeth Reddy; Ch Sriteja; R. Pramod

Publisher : Materials Performance and Characterization

Strain sensing and characterization of CNFs wrapped with polyaniline/polypyrrole based polyester composites

Authors : Dr. Ravi Kumar V., Prakash K. R.; Nithin K.S.

Publisher : Mechanical and Production Engineering Research and Development

Performance Analysis of a Diesel Engine Fuelled with Blends of Neem and Simarouba Oils

Authors : Vinod Kotebavi, M. Sunil Kumar

Publisher : Indian Journal of Science and Technology

Effect of turning parameters on A16351 T6 by using Design of Experiments

Authors : Dr. Ulhas K Annigeri, M Charan; M Vishnu Sai; T Ram Charan; L Rahul Sai

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012117

Evaluation of fatigue properties of EN31 steel heat treated using biodegradable gingili oil

Authors : Mrudula Prashanth, B P Harichandra, S V Prakash

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012155

Numerical Simulation of Low Velocity Impact Analysis of Fiber Metal Laminates

Authors : Dr. Prakash Marimuthu K., Devarajan K., Kartik Balkumar, Abishek V. Iyer, Abishek Ramasubramanian

Publisher : Mechanics and Mechanical Engineering

Investigation of Physical, Mechanical and Tribological Properties of Al6061–ZrO2 Nano-composites

Authors : Dr. Pramod R, G. B. V. Kumar, Sekhar, C. Guna, Kumar, G. P., and Bhanumurthy, T.

Publisher : HeliyonHeliyon

Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.

Publisher : Scientific Research Publishing

A Novel and Efficient Approach for Material Demand Aggregation using Genetic Algorithm

Authors : Dr. T. Srinivas Rao, Naidu, N. V. R., and K. Babu, M.

Publisher : IJCSNS (International Journal of Computer Science and Network Security)

Mechanical and Tribological Behavior of Al7075-Al2O3 Composites

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S

Publisher : National Engineering College

Experimental Studies on Physical and Wear Behavior of Al6061-SiC Composites

Authors : Dr. Veeresh Kumar G. B., N., Selvaraj; K.M., Nagendra Prasad; C.S.P., Rao

Publisher : Oriental Scientific Publishing Company

Effect of Al2O3 Particulate Reinforcement in Al6061 Alloy

Authors : Dr. Veeresh Kumar G. B., G.R.C., Pradeep; A., Ramesh

Publisher : Oriental Scientific Publishing Company

Prediction of Wear of Al6061-SiC Metal Matrix Composites using ANN

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.

Publisher : Amogsiddhi Education Society

Mechanical and tribological properties of as-cast Al6061-tungsten carbide metal matrix composites

Authors : Dr. Veeresh Kumar G. B., A.R.K., Swamy; A., Ramesha; J.N., Prakash

Publisher : An International Research Journal of Material Sciences

Mechanical and tribological behavior of particulate reinforced aluminum metal matrix composites–a review

Authors : Dr. Veeresh Kumar G. B., Rao, CSP; Selvaraj, N

Publisher : Journal of Minerals and Materials Characterization and Engineering, USA

Kinematic Analysis of MTAB Robots and its integration with RoboAnalyzer Software

Authors : Dr. Rajeevlochana G. Chittawadigi, Sadanand, Ratan O. M; Sairaman, Sashi; Sah Balaji P. H; Saha, Subir K; Udhayakumar, G

Effect of SiC Reinforcement in Al6061 Alloy

Authors : Dr. Veeresh Kumar G. B., N. Selvaraj, C.S.P., R., and Bhagyashekar, M. S.

Publisher : International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences

Effect of SiC Particulate Reinforcement in Al7075 Alloy

Authors : Dr. Veeresh Kumar G. B., G.R.C., P.

Publisher : International Journal of Emerging Technologies and Applications in Engineering, Technology and Sciences

Studies on Mechanical Properties of Al6063-SiC Composites

Authors : Dr. Veeresh Kumar G. B., G.R.C., P., and A., R.

Publisher : International Journal of Advanced Engineering Applications

Mechanical and dry sliding wear behaviour of Al7075 alloy-reinforced with SiC particles

Authors : Dr. Veeresh Kumar G. B., Rao, CSP; Selvaraj, N

Publisher : Journal of Composite Materials

Effect of particulate reinforcements on the mechanical properties of Al6061-WC and Al6061-Gr MMCs

Authors : Dr. Veeresh Kumar G. B., Swamy, ARK; Ramesha, A; Prakash, JN

Publisher : Journal of Minerals and Materials Characterization and Engineering

Studies on properties of as-cast Al6061-WC-Gr hybrid MMCs

Authors : Dr. Veeresh Kumar G. B., Swamy, A.R.K.b c; Ramesha, A.d

Publisher : Journal of Composite Materials

Studies on mechanical and dry sliding wear of Al6061-SiC composites

Authors : Dr. Veeresh Kumar G. B., Rao, C. S. P., and Selvaraj, N.

Publisher : Composites Part B: Engineering

Mechanical and dry sliding wear behavior of Al7075 alloy-reinforced with SiC particles

Authors : Dr. Veeresh Kumar G. B., Rao, C. S. Pb, and Selvaraj, Nb

Publisher : Journal of Composite Materials

Development of micro-shock wave assisted dry particle and fluid jet delivery system

Authors : Dr. Rakesh S. G.; Gnanadhas, D.P.a b; Allam, U.S.b; Nataraja, K.N.c; Barhai, P.K.d; Jagadeesh, G.a; Chakravortty, D.b

Publisher : Applied Microbiology and Biotechnology

Virtual Robot Simulation in RoboAnalyzer

Authors : Dr. Rajeevlochana G. Chittawadigi, OM, Ratan Sadanand; Saha, Subir K

Publisher : Proceedings of the 1st International and 16th National Conference on Machines and Mechanisms

Recent updates in the management of chemotherapy induced nausea and vomiting

Authors : Emmanuel James, P. M. Drisya

Publisher : Asian Journal of Pharmaceutical and Clinical Research

Effect of retrogression and re-aging treatment on properties of 7010 aluminium alloy forgings

Authors : Mrudula Prashanth, R.R. Bhat; Krishrod, chandra Mohanta

Publisher : IET Conference Proceedings

A Study on the Effect of Processing Parameters on the Quality of Parts made by Low Cost 3D Printer (submitted for publication)

Authors : Prof. Sriram Devanathan, Elangovan, M., and Aditya, T. N

Publisher : International Journal of Research in Engineering and Technology

Effect of zinc coating on mechanical properties of Al 7075

Authors : Mrudula Prashanth, Dr. Phanibhushana M. V., M. V. Phanibhushana, Dileep, B. P., RaviKumar, V.

Publisher : international publication, Applied Mechanics and Materials

Computational Study of Cooling of PV solar panel using finned heat pipe technology

Authors : Sandeep Koundinya, A S, Krishnan

Publisher : International Journal of Mechanical Engineering and Technology

Modal Analysis of Annular Plate with Crack and its Effect on Natural Frequency

Authors : Dr. Mohan Kumar S., Dr. Pramod R, Ramakrishna Pramod, Shashi Kumar M E

Publisher : Applied Mechanics and Materials

Finite Element Model Development for Structural Integrity of Shafts with Circumferential and Arbitrary Oriented Cracks

Authors : Dr. Pramod R, R. Pramod, M.E. Shashi Kumar, S. Mohan Kumar

Publisher : Applied Mechanics and Materials

Evaluation of Mechanical Properties of EN31 Steel Heat treated using Biodegradable oil

Authors : Mrudula Prashanth, Harichandra B P, Mahantayya Mahapati, S V Prakash

Publisher : International Journal of Applied Engineering Research

Synthesis and characterization of TiO2 reinforced Al6061 composites

Authors : Dr. Pramod R, Veeresh Kumar G. B.; Shivakumar Gouda, P.S.; Rao, C.S.P.

Publisher : Advanced Composites Letters, Adcotec Ltd.

A novel Discrete PSO Algorithm for Solving Job Shop Scheduling Problem to Minimize Makespan

Authors : Dr. Ramesh Kumar K., Rajendran, C.

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing

Evaluation of briquettes made of biodegradable materials as an alternate source of energy

Authors : Dr. Prakash Marimuthu K., Raghavendra Ravikiran K., Atluri Praneeth, Pramod Kumar K V S

Publisher : International Journal of Mechanical Engineering and Technology

Characterisation of AL6061-Fe2O3 metal matrix composites subjected to severe plastic deformation for multiple passes through equal channel angular pressingr

Authors : Dr. Phanibhushana M. V., Phanibhushana M. V, C.N. Chandrappa, H.B. Niranjan

Publisher : International Journal of Mechanical Engineering and Technology

Study of the effects of Shockwaves on Nano fluids

Authors : Shreekhar, Mohan Akhil, Sairam, Venkata Gopaiah, Sandeep Koundinya,S R Nagaraja

Publisher : IOP Conference Series: Materials Science and Engineering

Mathematical modelling to predict the residual stresses induced in milling process

Authors : Dr. Prakash Marimuthu K., C. S. C. Kumar, and H. P. T. Prasada

Publisher : International Journal of Mechanical and Production Engineering Research and Development

Mathematical modeling of unsaturated isophthalic resin’s curing cycle

Authors : Dr. Ravi Kumar V., Prakash, K.R.

Publisher : International Journal of Mechanical and Production Engineering Research and Development

A investigation on mechanical and metallurgical properties of steel EN24 and SIC MMCS

Authors : Dr. Dileep B. P., Sridhar, B.R.

Publisher : International Journal of Mechanical and Production Engineering Research and Development

Identification of second spectrum of a Timoshenko beam using differential transform method

Authors : Dr. Shali S, Jafarali Parol and Nagaraja S R

Publisher : Journal of Engineering Science and Technology

Fabrication and characterization of CFRP composite laminates with induced discontinuities

Authors : Dr. Dileep B. P., Chaithra, B.K., Prasad, C.S., Vitala, H.R., Dileep, B.P.

Publisher : International Journal of Mechanical and Production Engineering Research and Development

Experimental study of bisphenol based polymer matrix composites for mechanical and insulation properties

Authors : Dr. Shashi Kumar M. E., Ksvkn, P., Aditya, Y.S., Prakash Singh, R.A., Chainulu, U.A.

Publisher : International Journal of Mechanical Engineering and Technology, IAEME Publication

An ant colony approach to solve a vehicle routing problem in a FMCG company

Authors : Dr. T. Srinivas Rao, Dr. Prakash Marimuthu K.

Publisher : International Journal of Mechanical and Production Engineering Research and Development

3D finite element model to predict machining induced residual stresses using arbitrary lagrangian eulerian approach

Authors : Dr. Prakash Marimuthu K., P. H. P. Thirtha, K. C. S. Chethan, K. Prakash Marimuthu, H. P. Thirtha Prasada, and C. S. Chethan Kumar

Publisher : Journal of Engineering Science and Technology

Design, Development & Analysis of Forming Tool for side panel of an Automobile

Authors : Dr. Y. P. Deepthi, Dr. Ulhas K Annigeri, Raghavendra, Ravi Kiran

Publisher : International Journal of Mechanical and Production Engineering

Conference Paper

Weight optimization of gimbal joint for aircraft application

Authors : Dr. Dileep B. P., Ravishankar, M.K.

Publisher : AIP Publishing

Investigation on Structural Characteristics of Bamboo Laminates

Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R, ChellaNanda Kishore, Krishna Kanth V

Publisher : IOP Conf.

Investigation on tribological properties of heat-treated Al6061/WC/Gr HMMCs

Authors : Dr. Veeresh Kumar G. B., Dr. Pramod R, VemuriVenkata PhaniBabu, ViswanathMantha S. R.

Publisher : AIP Conference

Workspace Analysis of Industrial Manipulators and its Effective Teaching in RoboAnalyzer

Authors : Dr. Rajeevlochana G. Chittawadigi, Sayan Pradhan, Suhrit Kumar Pakhira, Tanushree Jana, Subir Kumar Saha

Publisher : IEEE

Monocular Tracking of Human Hand on a Smart Phone Camera using MediaPipe and its Application in Robotics

Authors : Dr. Rajeevlochana G. Chittawadigi, Sreehari Sreenath, D. Ivan Daniels, Apparaju S. D. Ganesh, Yashaswi S. Kuruganti

Publisher : IEEE

Interactive Image Projective Desktop and Screen Using Hand Tracking by Leap Motion

Authors : Dr. Rajeevlochana G. Chittawadigi, Mrinalkanti Roy; Dasari Romit N. S; Vaishnav Chunduru; Subir Kumar Saha

Publisher : IEEE

Development of A Technology Education Programme based on Self-Driven, Self-Learning and Self-Evaluating Approach

Authors : Dr. Rajeevlochana G. Chittawadigi, Nayan M. Kakoty, Zahnupriya Kalita, Abhijit Boruah and Subir K. Saha

Publisher : Advances in Robotics (AIR 2021): 5th International Conference of The Robotics Society

Study of Microstructure and Mechanical Properties of Metal Matrix Composites subjected to Severe Plastic Deformation – A Review

Authors : Dr. Phanibhushana M. V., K. Nitheeshwaran, T. Padmanathan, S. M. Sakthi Vignesh, M. Shri Anantha Sayan

Publisher : International Conference on Manufacturing, Material Science and Engineering (ICMMSE 2020)

Waste Segregation System using Automated Garbage Bin

Authors : Mr. Prashanth B N and Mr. Pramod R

Experimental study on RedMud based GeoPolymer concrete with flyash and GGBS in ambient temperature curing

Authors : Dr. Smita Singh, Rahul Das Biswas

Publisher : International Journal of Advances in Mechanical and Civil Engineering

Design of a Foldable Chassis Vehicle and Steering Mechanism

Authors : Arjun Murali, E. P. Subash, Harish P., Pramod R.

Design and Fabrication of Metal Chip Compaction Machine

Authors : Muralikrishna U., Vishnu S., RohitNambiar, MedhasKerkar, R. Pramod

Design and Fabrication of Amphicraft

Authors : Jayanth P. V., Ashwin R. Sivaraman R., Pramod R

Design and Development of Automobile Driving Mechanisms for Disabled Arm People

Authors : B. Arjun Nataraj, ArunSiddarth S., Karthikeyan S., Pramod R.

Cerberus-Amphibious Rescue Vehicle

Authors : Varun Rahul, Paras Lokhande, Pramod R

A Heuristic to Solve Vehicle Routing Problems with Time Slots

Authors : Deepak Ravi, Samta Phulli, Darshan Hegde, Prakash Marimuthu

Tsunami Wave Impact on Structures

Authors : Akhila (S8),RameshBabu(S8) Abhijeet(S8), Prakash Marimuthu

Design and Fabrication of Pot-Hole Road repair machine

Authors : Devathi Yadhunandana Sandeep Kumar( S8),Harshavardhan(S8) Jayankreddy(S8) PrasadamVamsi(S8) Pramod.R

Design And Development Of Wind Turbine Based Hybrid Fruits And Vegetables Preservation Unit

Authors : Pramod R,M DattaSandesh(S8),M Sandeep(S8) Jayaram, KottakotaKalasagarreddi(S8)

Publisher : National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering

Design and development of Tesla Turbine

Authors : PallerlamudisaisriHarsha( S8), Udaykumar(S8), Pramod.R

Publisher : National conference on Advancements in Mechanical, Environmental, Safety and Health Engineering

Calibration of Hypersonic Test Facility at Amrita School of Engineering, Bengaluru

Authors : T. Vasudevanand Rakesh S.G.

Publisher : National Symposium on Shock Waves

Comparison of Performance and Emission Characteristics of a CI Engine Fuelled with Dual Blends: Palm, Sesame oils and Diesel

Authors : Pala Tejesh, Pamarthi Shyam, P Siva Durga Prasad, and Vinod Kotebavi

Publisher : National conference on Automotive systems Design

Web Based ERP Model for Product Requirement Planning

Authors : Vinod Kotebavi

Publisher : International Conference on Advances in Mechanical Engineering

Studies on Forming of Thin Metal Foils for Bio-Medical Applications of Shock Waves

Authors : Rakesh S. G and Nagaraja S. R

Publisher : International Symposium on Shock Waves

Micro Blast Wave Assisted Bacterial Cell Transformation

Authors : Rakesh S. G

Publisher : International Symposium on Shock Waves

Lead Time Reduction in Cupellation of the Fire Assaying Process

Authors : Prakash Marimuthu

Publisher : International Conference on Total Engineering, Analysis & Manufacturing Technologies

Performance Evaluation of a CI Engine Fueled with Biodiesel and Vegetable Oil Blends

Publisher : International Conference on Total Engineering, Analysis & Manufacturing Technologies

Integrating Winchill PLM with ERP

Authors : Pramod R and Prashanth BN

Publisher : International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences

FEA of Aluminium Based MMCS and HMMCs

Authors : Pramod R

Publisher : International Conference on Advanced Materials, Manufacturing, Management and Thermal Sciences

Characterization of Electroplated High Strength Alluminium Alloy 7075-T6

Authors : Mohan Kumar S and Dileep B. P

Publisher : International Conference on Design and Advances in Mechanical Engineering

Mechanical & Tribological Properties of Al6061-Tungsten Carbide-Graphite Hybrid Metal Matrix Composites

Authors : Veeresh Kumar G. B

Publisher : International Conference on Recent Advances in Mechanical Engineering

FEM Model for Measurement of Hardness of INCONEL 718 Coatings

Authors : Pramod R

Publisher : International Conference on Recent Advances in Mechanical Engineering

Finite Element Modelling and Analysis of Drilling of GFRP/CFRP Composites

Authors : Shashi Kumar and Pramod R

Publisher : International Conference on Advanced Materials

Finite Element Simulation of Effect of Residual Stresses during Orthogonal Machining using ALE Approach

Authors : P. Krishnakumar; K. Prakash Marimuthu; K. Rameshkumar; K. I. Ramachandran

Publisher : International Journal of Machining and Machinability of Materials

Numerical modeling of steam condensation

Authors : Mr. Akhil. J

Publisher : 22nd national and 11th international ISHMT-ASME

Design and Development and Analysis of Forming Tool for Side Panel Of an Automobile

Authors : Mr. Ulhas K Annigeri, Mrs. Deepthi. Y. P, Mr. Raghavendra RaviKiran

Publisher : International Conference on Computer Science and Mechanical Engineering

Investigation of Mechanical and Fracture Properties of Electroplated High Strength Aluminum 7075, T6 Alloy

Authors : Mohan Kumar, Pramod R

Publisher : International Conference on Advances In Engineering and Technology

Waste Segregation System using Automatic Garbage Bin

Authors : Dr. Prashanth B N, Prashanth B. N., Pramod R

Publisher : International Conference on Advances in Engineering and Technology

Artificila Neural Networks For Predicting the Tribological Behavior of Al7075-SiC Metal Matrix Composites

Authors : Veeresh Kumar G. B., Pramod R.

Publisher : International conference on Advances In Engineering and Technology

Study of performance and emission characteristics of diesel engine fueled with waste cooking oil biodiesel

Authors : Likhith N, Bharat P C, Praveen Kumar A, Vinod kotebavi

Publisher : International Conference on Innovations and Emerging Trends in Mechanical Engineering

Mathematical Analysis on E-Glass Fiber and Silicon Carbide Reinforced Aluminum2618 Hybrid Composite

Authors : Dr. Phanibhushana M. V., Kottakota Kalasagarreddi, Sobhan Prem Sai Koppuravuri, Gundu Vinay Kumar, Phanibhushana M.V, Prakash Marimuthu K

Publisher : International Conference on Innovations and Emerging Trends in Mechanical Engineering

Effect of Zinc coating on mechanical properties of Al7075

Authors : Dileep B P, Ravi Kumar V, Mrudula Prashanth, Phanibhushana M V

Publisher : International Mechanical Engineering Congress

Maximum Permissible Ground Testing Durations for Various Thermal Barrier Coatings in a solid Rocket Model

Authors : Aditya Kumar, Nagaraja S.R

Publisher : International Mechanical Engineering Congress

Evaluation of Mechanical Properties of Hybrid composite Reinforced with SiC and MgO

Authors : Mohan kumar. S, Pramod R

Publisher : International Conference on Mechanical Engineering

Waste heat recovery by thermo-electric generation

Authors : Yashwanth B, Naveen V, Vinayaka Moorthy N, Nagaraja S R

Publisher : International Conference on Mechanical Engineering

Experimental Investigation on Red mud Based Geopolymer Mortars

Authors : Mrs. Smitasingh

Publisher : International conference on Sustainable Civil Infrastructure

Study and Analysis of Composite Elbow subjected to Internal Pressure

Authors : Mr. Balasubramanya. H. S. presented

Publisher : International conference on Polymer Composites

Investigation of mechanical properties of Al6082-nickel composites

Authors : Sujith Sai, Anish, Dileep B.P

Publisher : International Conference on Energy Environment and Engineering

Actively Tuned Vibration Absorber

Authors : Basavaraj Noolvi

A comparative study on mechanical properties of heat treated EN24 alloy steel and its MMC

Authors : Dileep B.P and Ravi Kumar V

Publisher : International conference on Mechanical Engineering

Performance and emission characteristics of CRDI engine working on plastic oil

Authors : Divaker Shetty A.S., Ravishankar Shukla

Publisher : International conference AMMMT

Robot Visualization Software for Robot Technicians in Advances in Robotics

Authors : Vaibhav Gupta, Rajeevlochana G. Chittawadigi and Subir K. Saha

Publisher : International Conference of Robotics Society of India

Methodology to Determine Counterweights for Passive Balancing of a 3-R Orientation Sensing Mechanism using Hanging Method

Authors : Shasa A. Antao, Vishnu S. Nair, Rajeevlochana G. Chittawadigi

Publisher : International and 18th National Conference on Machines and Mechanisms

Parametric Analysis of Waverider in Hypersonic Flow

Authors : Dr. Shali S, Hari Venkates, Harish Pillai, Hemanth Venkatesan, Akshay Sudhakaran

Publisher : AIP Conference Proceedings

Design and Development of Pneumatic Drug Delivery System

Authors : Dr. Prashanth B N, Abhinandu, K.V.S. Pramod Kumar, T. Srikanth

Publisher : Proceedings of the International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2018)

Numerical analysis on enhancement of heat transfer from a heated surface (fins)

Authors : Arjun Damodar E.T, and Dinesh kumar L

Publisher : AIP Conference Proceedings

Six Sigma in Piston Manufacturing

Authors : Divya Sharma S.G., A. Vamsikrishna, Medha Shruti

Publisher : Advances in Industrial and Production Engineering

Intuitive Control of 3 Omni-wheel based Mobile Plat-form using Leap Motion

Authors : Dr. Rajeevlochana G. Chittawadigi, Devasena Pasupuleti, Dimple Dannana, Raghuveer Maddi, Uday Manne

Publisher : Congress on Intelligent Systems

Effective Teaching of Homogenous Transformations and Robot Simulation using Web Technologies

Authors : Dr. Rajeevlochana G. Chittawadigi, Kuruganti S. Yashaswi, Apparaju S. D. Ganesh,D. Ivan Daniels

Publisher : Congress on Intelligent Systems

Effect of ECAP on Mechanical and Micro-Structural Properties Of Al7075-Ni Alloy

Authors : Dr. Ravi Kumar V., Dr. Dileep B. P., H.R. Vitala, M.M. Suraj

Publisher : Materials Today: Proceedings

A study on the Effect of Cryotreatment on Copper based brass alloy

Authors : Mrudula Prashanth, Sumanth Reddy S, Sai Krishna S

Publisher : Test Engineering and Management journal

Non-uniform beam vibration using Differential Transform Method

Authors : Dr. Shali S, P Jafarali

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012158 (2016)

Heat Transfer Enhancement in Solar Air Heater Duct Fitted With Punched Hole Delta Winglets

Authors : Vinod Kotebavi, Hithesh.U. Warrier

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012225

Performance Study of Solar Heat Pipe with Different Working Fluids and Fill Ratios

Authors : Vinod Kotebavi, S S Harikrishnan; Vinod Kotebavi

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012224

Pyramid type solar still coupled with evacuated tubes

Authors : Vinod Kotebavi, Ganesh A

Publisher : 2016 Biennial International Conference on Power and Energy Systems: Towards Sustainable Energy (PESTSE) (2016)

Computational study of Coanda based Fluidic Thrust Vectoring system for optimising Coanda geometry

Authors : Dr. Prakash Marimuthu K., R Bharathwaj, P Giridharan, K Karthick, C Hari Prasath

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing, Volume 149, p.012210

Durability of Red Mud Based Geopolymer Paste in Acid Solutions

Authors : Dr. Smita Singh, Aswath, M.U.; Ranganath, R.V.

Publisher : 2016 the First International Conference on Civil Engineering and Materials Science, Trans Tech Publications Ltd

Durability of Bricks Coated with Red mud Based Geopolymer Paste

Authors : Dr. Smita Singh, S.N. Basavanagowda; M. U. Aswath; R. V. Ranganath

Studies on a Novel Constant Velocity Mechanism and Exploring its Use in Deployable Structures

Authors : Dr. Rajeevlochana G. Chittawadigi, R. Lochana, Sen, D.

Publisher : 5th National Seminar on Aerospace Related Mechanism

Expert System for Sponge Iron Manufacturing

Authors : Dr. Veeresh Kumar G. B., K., Venkata Ramana; B.S., Kakol

Publisher : P.A. College of Engineering, Mangalore, Karnataka.

Multi Attribute Combinatorial Algorithms To Aggregate Raw Materials In A Supply Chain Network

Authors : Dr. T. Srinivas Rao, Mallikharjuna, Babu, N.V.R., Naidu

Publisher : 26th Convention of International Conference of Indian Society for Statistics Probability

Design of Web Based Aggregation of Materials in a supply chain network

Authors : Dr. T. Srinivas Rao, N. V. R., Naidu; Mallikharjuna, Babu

Publisher : International Conference on Operations research for Growing Nation 41st Annual Convention of Operational Research Society of India

Studies on Aluminum Alloy 7075-SiC Composites

Authors : Dr. Veeresh Kumar G. B., Murali, Mohan

Publisher : Don Bosco Institute of Technology, Bangalore

Spatial R-C-C-R Mechanism for a Single DOF Gripper

Authors : Dr. Rajeevlochana G. Chittawadigi, Rajeevlochana G. Chittawadigi

Publisher : Proceedings of the 14th national conference on machines and mechanisms

Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide-Graphite Hybrid Composites

Authors : Dr. Veeresh Kumar G. B., A.R.K., Swamy; A., Ramesha; J.N., Prakash

Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)

Effect of Nitriding on Mechanical Properties of Graphite Reinforced Al6061 MMCs

Authors : Dr. Veeresh Kumar G. B., G.R.C., Pradeep

Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)

Studies on Aluminum Alloy 6061-Al2O3 Composites

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.

Publisher : College of Engineering Trivandrum

Mechanical Property Evaluation of As-Cast Al6061-Tungsten Carbide Composites

Authors : Dr. Veeresh Kumar G. B., A.R.K., Swamy; A., Ramesha; J.N., Prakash

Publisher : Dayananda Sagar College of Engineering

Design of Web Based Aggregation of Materials in a supply chain network using genetic Algorithm

Authors : Dr. T. Srinivas Rao, R., N. N. V., and Mallikharjuna, B.

Publisher : Andhra University, Vishakhapatnam

Design of Mechanical separator for solid waste management

Authors : Sandeep Koundinya, Gowtham, D., and babu, padagakumara

Publisher : 3rd International Perspective on Current and future state of water resources and the environment

Assessment of Wear Resistance of Al6061-SiC Metal Matrix Composites using Wear Endurance Index

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; C.S.P., Rao; Bhagyashekar, M.S.

Publisher : ollege of Engineering Trivandrum

Theoretical Prediction of Tribological Properties of Al6061-SiC Composites

Authors : Dr. Veeresh Kumar G. B., N. Selvaraj, and C.S.P., R.

Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)

Synthesis and Property Evaluation of Al7075-Al2O3 Composites

Authors : Dr. Veeresh Kumar G. B., S. N., and C.S.P. Rao

Publisher : International Conference on Smart Technologies for Materials, Communication, Controls, Computing and Energy (ICST 2011)

Recursive Robot Dynamics in RoboAnalyzer

Authors : Dr. Rajeevlochana G. Chittawadigi, Jain, Amit; Shah, Suril V; Saha, Subir K

Publisher : 15th National Conference on Machines and Mechanisms

Prediction on Wear Properties of Al6061-Al2O3 MMCs using Artificial Neural Networks

Authors : Dr. Veeresh Kumar G. B., N., Selvaraj; C.S.P., Rao

Publisher : Amrita School of Engineering

Integration Frame Work for Portability of Data between PLM with ERP Systems

Authors : Dr. Pramod R, Dr. Prashanth B N, Dr. Shashi Kumar M. E., Shashi Kumar M. E., and B. N. Prashanth

Publisher : AMMMT, National Conference, Manipal University

Experimental Investigation of Properties of Al6061-SiC MMCs

Authors : Dr. Veeresh Kumar G. B., Shekar, S

Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)

Experimental Investigation of Properties of Al6061-Al2O3 MMCs

Authors : Dr. Veeresh Kumar G. B., Srikanth, Shekar, Meena

Publisher : National Conference on Advances in Mechanical Engineering (AIM Engg 2011)

Dynamic Simulation of a KUKA KR5 Industrial Robot using MATLAB SimMechanics

Authors : Dr. Rajeevlochana G. Chittawadigi, A. D. Udai, Saha, S. K.

Publisher : 15th National Conference on Machines and Mechanisms

Combined effect of T6 heat treatment and reinforcements on tribological properties in Al6061/WC /Gr metal matrix hybrid composites

Authors : Dr. Veeresh Kumar G. B., A., Ramesh, A.R.K., Swamy

Publisher : Joint International Conference on Advanced Materials (ICAM 2011)

Realistic Modeling and Dynamic Simulation of KUKA KR5 Robot using RecurDyn

Authors : Dr. Rajeevlochana G. Chittawadigi, S. Kumar, and Saha, S. K.

Publisher : The 6th Asian Conference on Multibody Dynamics

Prediction on Wear of Al7075-Al2O3 MMCs using Artificial Neural Networks

Authors : Dr. Veeresh Kumar G. B., S. N.,G. B., and C.S.P., R.

Publisher : International Conference Advances In Mechanical, Manufacturing and Building Sciences

Control of an Omnidirectional Walking Simulator

Authors : Dr. Rajeevlochana G. Chittawadigi, Chauhan, Manish; Rajeevlochana G. Chittawadigi; Saha, Subir K; Singh, Satinder Paul

Publisher : 12th International Symposium on Experimental Robotics

Automatic Extraction of DH Parameters of Serial Manipulators using Line Geometry

Authors : Dr. Rajeevlochana G. Chittawadigi, Saha, S. K., and Kumar, S.

Publisher : The 2nd Joint International Conference on Multibody System Dynamics

Virtual Robots in RoboAnalyzer Software

Authors : Dr. Rajeevlochana G. Chittawadigi, R. Sadanand OM, and Saha, S. K

Publisher : The 1st International 16th National Conference on Machines and Mechanisms

Teaching and Learning of Robot Kinematics Using RoboAnalyzer Software

Authors : Dr. Rajeevlochana G. Chittawadigi, Bahuguna, Jyoti; Saha, Subir K

Publisher : Teaching and Learning of Robot Kinematics Using RoboAnalyzer Software

Identification of Denavit-Hartenberg Parameters of an Industrial Robot

Authors : Dr. Rajeevlochana G. Chittawadigi, Hayat, Aamir A; Saha, Subir K

Publisher : Advances in Robotics

Geometric model identification of a serial robot

Authors : Dr. Rajeevlochana G. Chittawadigi, Hayat, A. A., and Saha, S. K.

Publisher : The 3rd IFToMM International Symposium on Robotics and Mechatronics

The effect of Retrogression and Re-aging treatment on properties of 7010 Aluminium Alloy Extrusions

Authors : Mrudula Prashanth, P. S. V., Kshirod, C. Mohanta, and R., R. Bhat

Publisher : National level Paper presentation and project exhibition held at East Point college of Engineering, Bangalore

An Analytical Method to Detect Collision between Cylinders Using Dual Number Algebra

Authors : Dr. Rajeevlochana G. Chittawadigi, Saha, Subir K

Publisher : IEEE/RSJ International Conference on Intelligent Robots and Systems

Performance analysis of a VCR SI engine using petrol alcohol blends

Authors : Vinod Kotebavi, Basu, D., Phulli, S

Publisher : 2014 Power and Energy Systems Conference: Towards Sustainable Energy, PESTSE 2014

The Effect of deep cryogenic treatment on Mechanical Properties of Al-SiC composite

Authors : Mrudula Prashanth, G. D. krishnan, Sheshu, babu, Srikanth, R.

Publisher : National Conference on Advances in Mechanical Engineering held at T John Institute of Technology, Bangalore

Development of Stage tools for Side Panel of an automobile

Authors : Raghavendra Ravikiran K., Dr. Ulhas K Annigeri, Y.P., Deepthi, K. Annigeri Ulhas

Publisher : International Conference of Mechanical Engineering

Design of an Eco-friendly Pneumatic Engine for Reduced Fuel Consumption: A Conceptual Approach

Authors : Dr. Shashi Kumar M. E., K. Ch, and Nadeem, M. I.

Publisher : National Conference on Advances in Mechanical Engineering AIM-2014

Design, Development and Analysis of Forming tool for side panel of an automobile

Authors : Dr. Y. P. Deepthi, Raghavendra Ravikiran K., Dr. Ulhas K Annigeri

Publisher : International Conference on Computer science and Mechanical Engineering

Artificial Neural Networks for Predicting the Tribological Behaviour of Al7075-SiC Metal Matrix Composites

Authors : Dr. Veeresh Kumar G. B., P. R.

Publisher : International Conference on Advances in Engineering and Technology

Analysis of Natural Frequency using Differential Transform Method

Authors : Dr. Shali S, Nagaraja, S. R., Jafarali, P.

Publisher : International Multi Conference on Innovations in Engineering and Technology

Virtual Robots Module: An effective visualization tool for Robotics Toolbox

Authors : Dr. Rajeevlochana G. Chittawadigi, Sadanand, Ratan O. M; Joshi, Ravi; Saha, Subir K

Publisher : Proceedings of 2nd Advances in Robotics

Solving a Reverse Supply Chain TSP by Genetic Algorithm

Authors : Dr. T. Srinivas Rao, Gopi, Sampangi

Publisher : ICMME 2015 conference organized by SCSVM university Kanchipuram

Performance test of cryogenically treated and coated tungsten carbide cutting inserts

Authors : Dr. Y. P. Deepthi, Raghavendra Ravikiran K., Prakash, M.

Publisher : International Conference on Mechanical and Manufacturing Engineering (ICMME)

MechAnalyzer: 3D Simulation Software to Teach Kinematics of Machines

Authors : Dr. Rajeevlochana G. Chittawadigi, Lokesh, Rakshith; Saha, Subir Kumar

Publisher : 2nd International and 17th National Conference on Machines and Mechanisms (iNaCoMM2015)

MechAnalyzer: 3D Model Based Mechanism Learning Software

Authors : Dr. Rajeevlochana G. Chittawadigi, Hampali, Shamanth; Saha, Subir K

Publisher : Proceedings of the 14th IFToMM World Congress

Influence of WC Particulate Reinforcement on the Mechanical Properties and Sliding wear of Al6061 Alloys

Authors : Dr. Veeresh Kumar G. B., R Pramod

Publisher : International Conference on Mechanical and Manufacturing (ICMME 2015)

Exergy Analysis of Biogas Digester and Effect of Iron Oxide Nanoparticle in Bio Digestion

Publisher : Second International Conference on Nanaotechnology 2015

Passive Balancing of a Novel 3-R Orientation Sensing Mechanism

Authors : Dr. Rajeevlochana G. Chittawadigi, Shasa A. Antao;Vishal, S.; Rajan, S.; Nair, V. S.

Publisher : 8th Asian Conference on Multibody Dynamics (ACMD2016).

Vibration of non-uniform rod using Differential Transform Method

Authors : Dr. Shali S, S. Shali;.; Jafarali, P.

Publisher : IOP Conference Series: Materials Science and Engineering

Method of stir casting of Aluminum metal matrix Composites: A review

Authors : Dr. Ulhas K Annigeri, Veeresh Kumar G. B.

Publisher : Materials Today: Proceedings

A Comparative Evaluation of GA and SA TSP in a Supply Chain Network

Authors : Dr. T. Srinivas Rao

Publisher : Materials Today: Proceedings, Elsevier Ltd,

Performance analysis of a solar still coupled with evacuated heat pipes

Authors : Vinod Kotebavi, Pramod B.V.N, Prudhvi Raj J, Hari Krishnan S.S, Kotebavi V.

Publisher : IOP Conference Series: Materials Science and Engineering

Optimal sub-parametric finite element approach for a Darcy-Brinkman fluid flow problem through a circular channel using curved triangular elements

Authors : Dr. V. Kesavulu Naidu, ; Banerjee, D.; Siddheshwar, P.G.; Shankara

Publisher : IOP Conference Series: Materials Science and Engineering

Influence of turning Treatments on Al6061 by Offline Inspection Technique

Authors : Dr. Ulhas K Annigeri, K L G Sandeep, M Prasanna Chaitanya, G Sairam Varma1 and B Arun Datta

Publisher : IOP Conference Series: Materials Science and Engineering

Design and Development of Hybrid Wind and Solar Energy System for Power Generation

Authors : Dr. Prashanth B N, Dr. Pramod R, R. Pramod, G. B. Veeresh Kumar

Publisher : Materials Today: Proceedings

A case study on Solar Vapour absorption refrigeration system

Publisher : International Journal of Engineering and Technology(UAE)

2D Finite Element Thermo-Mechanical Model to Predict Machining Induced Residual Stresses Using ALE Approach

Authors : Dr. Prakash Marimuthu K., C. S. C. Kumar, and H. P. T. Prasada

Publisher : Materials Today: Proceedings

Mono fluid heat exchanger system

Authors : Prakash, Divakar Shetty

Publisher : AIP Conference Proceedings

Effect of shock waves on bio-diesel

Authors : Sandeep Koundinya, Bhat, K.V.; Prasath, S.G.; Vishal, T.V.; Teja, V.S.

Publisher : International conference on Emerging Trends in Mechanical Engineering/AIP, American Institute of Physics Inc.

Studies on Physical & Tribological Properties of Al6061-SiC Composites

Authors : Dr. Veeresh Kumar G. B., Selvaraj, N.; G.B.; C.S.P., Rao; Bhagyashekar, M.S.

Publisher : International Conference and Exhibition on Total Engineering, Analysis and Manufacturing Technologies (Team Tech 2009)

Conference Proceedings

Simulation of small holes used in Gas Turbine Dome

Authors : Dr. Ravi Kumar V., Debjyoti Sahu, Aravind Kumar M S

Publisher : National Conference on Thermal, Fluid and Energy Engineering

Fundamentals of gas turbine combustion and simulation of small holes used in gas turbine dome

Authors : Dr. Ravi Kumar V., Debjyothi Sahu

Publisher : National Conference on Recent Trends in Mechanical Engineering

Enhancing the Life of Tungsten Carbide Insert by Cryogenic Treatment

Authors : Dr. Y. P. Deepthi

Publisher : International Conference on Advances in Manufacturing Technology

Electrical Properties of CNTs & CNFs – A Comparative Study

Authors : Dr. Ravi Kumar V., Dr. Prakash K. R., Dr. G. L. Shekar, Dr. L. Krishnamurthy

Publisher : Indo-Canadian Symposium on Nano-Science and Technology (ICSNST 2013), NIE, Mysuru

Wear Rate Behavior of As-cast and Heat Treated Hybrid Aluminum Metal Matrix Composites

Authors : Dr. Ravi Kumar V., Balasubramanya HS , J Sharana Basavaraja, S Srinivas

Publisher : International Conference on Advances in Materials and Manufacturing Engineering

Transient Analysis of a Blunt Body with Cylindrical Protrusion in Hypersonic Flow

Authors : Akshay N, Nagaraja S.R.

Publisher : IOP Conference Series: Materials Science and Engineering

An Ant Colony and Simulated Annealing Algorithm with Excess Load VRP in a FMCG Company

Authors : Dr. T. Srinivas Rao

Publisher : IOP Conference Series: Materials Science and Engineering

Numerical study on stabilization of flame inside micro-combustor

Authors : Gagan Chakravarthy C G, Ashwin Krithik M ,G Siddhartha and Dinesh kumar L

Publisher : AIP Conference Proceedings

Numerical analysis on enhancement of heat transfer in micro-heat sink using dimpling surface

Authors : V S Gopala Krishna, Dinesh kumar L

Publisher : AIP Conference Proceedings

Effect of Brass and Silver on Mechanical Properties of Copper

Authors : Mrudula Prashanth, Satish.N, B.S.Ajay Kumar

Publisher : International conference of Advanced Materials and Manufacturing Applications

Design and Development of Tilting Rotary Furnace

Authors : Dr. Prashanth B N, V. Sai Varun, P. Tejesh

Publisher : IOP Conference Series: Materials Science and Engineering, IOP Publishing

Mechanical Characterization of AA7050-TiC Metal Matrix Composites under as Cast as condition

Authors : Dr. Ravi Kumar V., Dr. Mohan Kumar S., Aditya Ranganathan, P.V. Akshay Krishnan, Akshay S. Nambiar, S. Mohan Kumar

Publisher : Materials Today: Proceedings,

An Evaluation of ACO and GA TSP in a Supply Chain Network

Authors : Dr. T. Srinivas Rao

Publisher : Materials Today Proceedings,

Investigation of composite sandwich plates for ballistic armor application

Authors : Basavaraj Noolvi, K. Nikhil Kumar; C.H. Bharat Kumar; K. Hemanth Kumar;

Publisher : Materials Today: Proceedings

A teach pendant to control virtual robots in Roboanalyzer

Authors : Dr. Rajeevlochana G. Chittawadigi, Mehta Ishaan, Bimbraw Keshav, Subir Kumar Saha

Publisher : 2016 International Conference on Robotics and Automation for Humanitarian Applications

A Review on preparation, efficiency and emissions of Mahua Biodiesel and its blends

Authors : Vignesh V., Aditya Sai, K.; Manikanta, S.; P. Vignesh; Naveen Kumar; Sai Teja P.; Dinesh kumar, L.

Publisher : AIP Conference Proceedings, Hyderabad

Development of optimized solution for a generic disaster management problem through construction of responsive supply chain a review

Authors : Dr. T. Srinivas Rao, Divya Sharma S.G.

Publisher : International conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019)

An Ant colony and nearest neighbourhood approach to solve an excess capacity vehicle routing problem in a FMCG Company

Authors : Dr. T. Srinivas Rao, Prakash K. Marimuthu

Publisher : International conference on Advances in Mechanical Engineering and Nanotechnology (ICAMEN 2019)

Experimental investigation on tribological properties of PTFE based composite

Authors : Dr. Y. P. Deepthi, Kumar P. Santhosh, Vinayak Madhu Surya, Vaishak V. N., Dikshit Mithilesh Kumar, Pathak Vimal Kumar, Srivastava Ashish Kumar

Publisher : ICAMEN 2019, AIP Conference Proceedings

Effective Teaching of Mechanism Synthesis using MechAnalyzer Software

Authors : Dr. Rajeevlochana G. Chittawadigi, D. Pandey, Kushwah, J. S., K. Krishna, R., and Saha, S. K.

Publisher : IFToMM World Congress on Mechanism and Machine Science, Advances in Mechanism and Machine Science

Natural Control of Virtual Models of Mechanism Using Leap Motion for Interactive Learning

Authors : Dr. Rajeevlochana G. Chittawadigi, S. Pullil

Publisher : 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM2019)

Twin-Plate Turbine using Parallel Four-bar Mechanisms

Authors : Dr. Rajeevlochana G. Chittawadigi, V. Ch, Coca, S. Vikas

Publisher : 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM2019)

Effective Education Using a 2-DOF Five-bar Mechanism

Authors : Dr. Rajeevlochana G. Chittawadigi, S. G. S., Prasanth, S., V., P. Kumar, S., V.

Publisher : 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM2019)

Soft Robotic Gripper for Agricultural Harvesting

Authors : Dr. Rajeevlochana G. Chittawadigi, S. M. G. Vidwath, Rohith, P., Dikshithaa, R., Nrusimha, S. N

Publisher : 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM2019)

Intuitive Manipulation of Delta Robot using Leap Motion

Authors : Dr. Rajeevlochana G. Chittawadigi, Dr. Ganesha Udupa, P. Giridharan, Dr. Ganesh Udupa

Publisher : 4th International and 19th National Conference on Machines and Mechanisms (iNaCoMM2019)

Intuitive Control of Virtual Robots using Transformed Objects as Multiple Viewports

Authors : Dr. Rajeevlochana G. Chittawadigi, Matsumaru, T., and Saha, S. K.

Publisher : IEEE International Conference on Robotics and Biomimetics (ROBIO) conducted by IEEE Robotics and Automation Society (RAS)

Design Analysis of an Industrial Robot under Development

Authors : Dr. Rajeevlochana G. Chittawadigi, P., Sah

Publisher : Advances in Robotics (AIR2019): 4th International Conference of the Robotics Society

Effective Teaching and Learning of Homogenous Transformation Matrix using RoboAnalyzer Software

Authors : Dr. Rajeevlochana G. Chittawadigi, S. Maram, Kuruganti, Y., Rajeevlochana G. Chittawadigi, and Saha, S

Publisher : Advances in Robotics (AIR2019): 4th International Conference of the Robotics Society

A Biomimetic Design of an Artificial Knee for Lower Limb Prosthesis

Authors : Dr. Rajeevlochana G. Chittawadigi, G. Gopinath, Krishnan, H., Bandaru, K., Mohan, K. Sai Krishn

Publisher : Proceedings of the Advances in Robotics (AIR2019): 4th International Conference of the Robotics Society.

Design and Development of Automatic Warehouse Sorting Rover

Authors : Dr. Prashanth B N, R. V. Subrahmanyam, M. Kumar, K., Nair, S. S., Warrier, S

Publisher : International Conference on Advances in Materials and Manufacturing Applications (IConAMMA – 2019)

Design and Development of Sensor Based Automatic Steering Control System for Automobiles

Authors : Dr. Prashanth B N, V. Aravindvas, Srinivas, U., Rayudu, M. V., Subhash, T

Publisher : International Conference on Advances in Materials and Manufacturing Applications (IConAMMA – 2019) / Materials Today. Elsevier Publications

Mechanical Characterization of Silicon Nitride Reinforced Al6061 Metal Matrix Composites Subjected to Severe Plastic Deformation

Authors : Dr. Phanibhushana M. V., P. Vaasavi, P. Gowtham Kumar, V. Sai Krishna, P. Kusumanth Reddy

Publisher : International Conference on Advances in Materials and Manufacturing Applications (IConAMMA – 2019) / Materials Today

Design of Genetic Algorithm for a Web Based Aggregation model

Authors : Dr. T. Srinivas Rao

Publisher : 46th Annual Convention of Operational Research Society of India ( ORSI )

Study of Machinability Characteristics on E-Glass Fiber and Silicon Carbide Reinforced Aluminum 2618 Hybrid Composite

Authors : Dr. Phanibhushana M. V., Kalasagar Reddy, Sobhan Prem Sai, Vinay Kumar, Supraj A, Phanibhushana M V

Publisher : Journal of Basic and Applied Engineering Research

Characterization of A356/SiCp/Gr Metal Matrix composites

Authors : Mrudula Prashanth, Dr. Phanibhushana M. V., Dr. Ravi Kumar V., H. S. Balasubramanya

Publisher : International Conference on advances in Engineering Technology & Management ICAETM 2014

Virtual Experiments for Integrated Teaching and Learning of Robot Mechanics Using RoboAnalyzer

Authors : Dr. Rajeevlochana G. Chittawadigi, Sadanand, Ratan; Joshi, Ravi Prakash; Saha, Subir Kumar.

Publisher : CAD/CAM, Robotics and Factories of the Future: Proceedings of the 28th International Conference on CARs {&} FoF 2016, Springer India, New Delhi.

Thermal performance of a selected heat pipe at different tilt angles

Authors : S. Bhanu Prakash, Raghuram, J.; Phani Kumar, K.V.N.K.; Khiran, G.V.; Snehith, K.;

Publisher : IOP Conference Series: Materials Science and Engineering

Study of Wear Characteristics of Hematite Reinforced Aluminum Metal Matrix Composites

Authors : Dr. Phanibhushana M. V., Chandrappa, C.N.; Niranjan, H.B.

Publisher : Materials Today: Proceedings, Elsevier Ltd,

Evaluation of Mechanical and Wear Properties of Aluminium AA430 Reinforced with SiC and Mgo

Authors : Dr. Mohan Kumar S., Dr. Pramod R, R. Pramod; Govindaraju, H.K.

Publisher : Materials Today: Proceedings, Elsevier Ltd,

Development of Modular Integration Framework between PLM and ERP Systems

Authors : Dr. Prashanth B N, Venkataram, R.

Publisher : Materials Today: Proceedings, Elsevier Ltd,

Thermal and Vibrational Characteristics of Single Point Cutting Tool on Aluminum and Wrought Carbon Grade B (WCB) Samples

Authors : Dr. Pramod R, Gouda, P.S.S., Srikanth, K.S., Anwal, R., Kumar, G.B.V

Publisher : Materials Today: Proceedings

A Study on the Al2O3 Reinforced Al7075 Metal Matrix Composites Wear behavior using Artificial Neural Networks

Authors : Dr. Pramod R, G. B. Veeresh, Gouda, P. S. Shivakumar, and Mathew, A. Tom

Publisher : Materials Today: Proceedings

Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy

Authors : Dr. Pramod R, V. Anirudh, M Vigneshwaran, Ramakrishna Pramod, Vijay E, Veeresh Kumar G B

Publisher : Materials Today: Proceedings

Artificial Neural Network Prediction on Wear of Al6061 Alloy Metal Matrix Composites Reinforced With-Al2o3

Authors : Dr. Pramod R, Veeresh Kumar, G.B., Pramod, R., Rao, C.S.P., Gouda, P.S.S

Publisher : Materials Today: Proceedings

A performance evaluation of GA algorithm to solve a VRP problem with excess loads for a FMCG company

Authors : Dr. T. Srinivas Rao

Publisher : International conference on Emerging Trends in Mechanical Engineering, American Institute of Physics.

Free vibration analysis of SMA hybrid composite beam

Authors : Sri Harsha, Basavaraj Noolvi

Publisher : AIP Conference Proceedings

Applications of a 3-revolute orientation sensing mechanism (3-ROSM) in controlling a camera

Authors : Dr. Sobha V. Nair, Shasa A. Antao; .; Rajeevlochana G. Chittawadigi

Publisher : Mechanisms and Machine Science

Book Chapter

Integrator

Authors : Sandeep Koundinya, Raj, M. Ambrose

Publisher : Breakthrough- Bringing Ideas to Life.

Book

Operations Research

Authors : Dr. Ravi Kumar V., R. Veerachamy

Publisher : IK International Publishing House

Journal

Characterization of Aluminium Metal Matrix Hybrid Composites Subjected to Equal Channel Angular Pressing

Authors : Phanibhushana M.V., A.N.N.S. Bharath, A.R. Sundeep, A.C. Sharan, A. Sai Pratap Reddy

Publisher : Advances in Materials and Manufacturing Applications

Comparative Study of Materials for Reinforcement in Bridge Pier Bearings

Authors : Abhitej Naidu, J. Sai Maruthi, Vinay M. Manideep Reddy, M. Pardhu Chandra and Smita Singh

Publisher : International Journal of Civil Engineering and Technology

Role of iron in the enhanced reactivity of pulverized Red mud: Analysis by Mössbauer spectroscopy and FTIR spectroscopy

Authors : Smita Singh, M.U. Aswath, Rahul Das Biswas, R.V. Ranganath, Harish K. Choudhary, Rajeev Kumar, Balaram Sahoo

Publisher : Case Studies in Construction Materials, Elsevier Publication

Influence of permeable circular body and CuO−H2O nanofluid on buoyancy-driven flow and entropy generation

Authors : Vijaybabu T. R.

Publisher : International Journal of Mechanical Sciences, Elsevier

Evaluation of Dynamic Mechanical and Thermal Behavior of HDPE Reinforced with MWCNT/h-BNNP: An Attempt to Find Possible Substitute for a Metallic Knee in Transfemoral Prosthesis

Authors : Nitesh Dhar Badgayan, Santosh Kumar Sahu, Sutanu Samanta, P. S. Rama Sreekanth

Publisher : International Journal of Thermophysics, Springer

2D Analysis of wave rider in Hypersonic flow

Authors : Sumanth Pai, Powell Poly Chandy, R.A Krishnan, S Shali

Publisher : International Journal of AIP Conference Proceedings

Precipitation Behavior of IN718 After Surface Mechanical Attrition Treatment (SMAT) and Its Effect on Wear Properties

Authors : P. Dileep, Satyam Suwas, Anuj Bisht, Supreeth Gaddam, Lailesh Kumar

Publisher : JOM

Effect of Electroless Nickel (EN) Coating on Mechanical Properties of Al-6061

Authors : Dr. Shashi Kumar M. E., A. H. L.Saketh, Chanduri, P., G. Reddy, M., B. Reddy, V.

Publisher : International Journal of Mechanical and Production Engineering Research and Development

Research Article

Investigation of the Tribological Characteristics of Aluminum 6061-Reinforced Titanium Carbide Metal Matrix Composites

Authors : Dr. Veeresh Kumar G. B., R. Hari Kiran Reddy ; P. Ramu ; B. Kunaal Kumar ; Pagidi Madhukar ; Murthy CHAVALI ; Faruq Mohammad ;Sachin K. Khiste

Other

A Novel And Efficient Approach For Materials Demand Aggregation Using Genetic Algorithm

Authors : Tatavarthy Srinivas Rao Balkrishna Rao, Dr N. V. R Naidu, Dr k. Mallikharjuna Babu.

A case study of a low power vapour adsorption refrigeration system

Authors : Banala Dinesh , Sai Manikanta M, Dishal Kumar T, DebjyotiSahu

Publisher : International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16)

A case study of a low power vapour compression refrigeration system

Authors : Abhinav.R , Nambiar, DebjyotiSahu

Publisher : International Conference on Advances in Manufacturing Applications-2016(IconAMMA’16)

Use of Robots in Sponge Iron Manufacturing

Publisher : National Conference on Mechanical Engineering Trends, COMET 2006

Analysis of Cold-Hole Expansion by Split Mandrel as a Useful Technique in Aerospace Industries

Publisher : Third National Conference on Trends in Mechanical Engineering, TIME 2006

Redesign of Rolling Mill

Publisher : National Conference on Recent Advances in Design Engineering, RADE 2007

Parametric Study of Wire Cut EDM Process by Taguchi’s Technique

Publisher : National Conference on Trends and Innovations in Mechanical Engineering, TIME 2007

Mechanical Properties of Particulate Reinforced (Al6061-Al2O3p and Al7075-SiCp) Composites

Publisher : International Conference on Micro Electro Mechanical Systems (MEMS – 08)

Mechanical and Tribological Behavior of Al6061-SiCp Composites

Publisher : International Conference on Recent Trends in Materials and Mechanical Engineering

Mechanical and Tribological Behaviour of Al7075-Al2O3 Composites

Publisher : Journal of Manufacturing Engineering

Designing and development of an autonomous solar-powered robotic vehicle

Publisher : Advances in Intelligent Systems and Computing

Methanol as alternative fuel in high compression ratio twin spark ignition si engine

Publisher : International Journal of Mechanical Engineering and Technology

Influence of nose radius of blunt cones on drag in supersonic and hypersonic flows

Publisher : IOP Conference Series: Materials Science and Engineering

Experimental analysis of exfoliation rate on aluminum alloy Al7010

Publisher : IOP Conference Series: Materials Science and Engineering

Surface Morphing using Macro Fiber Composites

Publisher : Materials Today: Proceedings

A Study on Diesel Engine Using Waste Cooking Oil with Biotic Additive

Publisher : IOP Conference Series: Materials Science and Engineering

Parametric Optimization of Surface Roughness of Deburring Process on Aluminum Alloy Using SCARA Manipulator

Authors : Y P Deepthi, P V S Subhashini, N. Amulya

Publisher : Materials Today: Proceedings

FLOW ANALYSIS of ISOBUTANE (R-600A) INSIDE AN ADIABATIC CAPILLARY TUBE

Authors : Debjyoti Sahu, Praveen Alok

Publisher : IOP Conference Series: Materials Science and Engineering

Experimental Study on Vapor Adsorption Refrigeration System with Carbon-Methanol Pair

Publisher : IOP Conference Series: Materials Science and Engineering

Experimental Study of Hematite Reinforced Aluminum Metal Matrix Composites subjected to Equal Channel Angular Pressing

Authors : Dr. Phanibhushana M. V., M.V. Phanibhushana, C. N. Chandrappa, H. B. Niranjan

Publisher : Materials Today: Proceedings

Effect of cutting speed on generation of heat at work-tool interface of copper based silver and brass alloys

Publisher : International Journal of Mechanical and Production Engineering Research and Development

ACAM: A CNC Simulation Software for Effective Learning

Publisher : Procedia Computer Science

Admissions Apply Now